Source file is corrupted. Patch 2.0
I keep getting the error: «An error occurred while trying to copy a file: The source file is corrupt.»
I have tried redownloading with a different browser, downloading the launcher version of the patch, and running as administrator, and I still get the error. Anyone else have this problem? Were you able to fix it?
Oh and I also reinstalled the game from scratch, but that didn’t work either.
You can’t download the patch or you can’t install it?
Coz in the first case, I have downloaded it with Firefox Down Them All. There are more downloader acceletors on the web. Sometimes I skipped that problem using apps like those.
Nah, it downloads fine but when I try to install it I get that message.
Are you temporarily disabling antivirus before applying the patch ?
Tried it, didn’t work
I haven`t gotten the patch yet…satellite internet and if i do before the hours of 2-7 am i`ll exceed caps which is a bummer . My purpose would be to provide a MD5 to make sure that you have a full and working patch .
Usually though when you get a source file is corrupted it generally means your download was broken .
EDIT : Just checked the size of the download and i got 907 MB if you hover your mouse over the 2.0 patch what size does yours show ?
It says 907 MB. I tried downloading with Firefox several times and with Chrome. I also downloaded through the launcher and attempted to use that file and it had the same issue.
Are you running any mods at all ?
Not since the fresh install. I’m gonna try downloading it on my brothers computer and saving it to a USB stick.
EDIT: That didn’t work either.
Are you a Steam user? If so, you need to use the Steam version of the patch.
(Ignore me if you’re not a Steam user)
OK was able to get the patch this morning . Below is the MD5 for witcher 2.0 int
Witcher 2 patch 2.0— 91c735fd63c83f249754a124a2023d8b
Sorry but what do I do with that? Am I supposed to check if mine is the same? If so where do I check that?
Not sure if this is helpful, but I also have a problem where when I try to update via the launcher it does an infinite download loop. It downloads, verifies, then redownloads over and over without launching the patcher.
Ok so GOG updated their download version to 2.0, so I redownloaded the whole game. It is 2.0 now, but I don’t know how to register this account with the game. I don’t want to register a new account because I’ve already had to do that several times due to the forum change and launch issues.
EDIT: Found the fix in another thread. Sweet, now its all set up. Thanks for the help guys.
Good afternoon chums, and what you see in the title, is what i have continuously read since 2 weeks ago.
For a brief background, I built a PC about a month ago, and it has been a headache to work with.
Specs: Motherboard: ASRock Z68 Extreme4 Gen 3 CPU: Core i5 RAM: 16 Gigs Corsair Vengeance Series DDR3-1600 Videocard: Radeon HD6770 HDD: Seagate Barracuda 1TB (two of those)
If I am missing anything, please let me know.
Installing an OS proved to be a challenge in itself (Removing all but one Ram stick, and everything unnecessarily plugged into the motherboard). When i initially got everything built and running, I had no problem installing any of my PC games on there. I ran both my Mass Effects just fine and dandy.
It wasn’t until 2 weeks ago when i had to format and reinstall windows when the problems started. ANY game i tried to install, would always give me the «An error occurred while trying to copy a file. The source file is corrupted.» I went and bought Deus Ex Human Revolution, brand new, and it still gave me the error. Replaced it 3 times, because it gave me the error all three times. I downloaded games from Steam, and still same error. I even tried installing the games just like my OS, with removing all the unnecessary hardware, and extra RAM sticks, and still errored out.
I would like to mention that nothing is pirated. My OS is genuine, and so are all my games. I’v read through countless forums, and they all suggest «re downloading the game», which doesn’t help when i have a physical copy of the game.
It is really frustrating and any help would be infinitely appreciated.
Many thanks in advance.
|
|
|
|
To Fix (an error occurred while trying to copy a file the source file is corrupted!!!!) error you need to |
|
|
Step 1: |
|
|---|---|
| Download (an error occurred while trying to copy a file the source file is corrupted!!!!) Repair Tool |
|
|
Step 2: |
|
| Click the «Scan» button | |
|
Step 3: |
|
| Click ‘Fix All‘ and you’re done! | |
|
Compatibility:
Limitations: |
an error occurred while trying to copy a file the source file is corrupted!!!! is commonly caused by incorrectly configured system settings or irregular entries in the Windows registry. This error can be fixed with special software that repairs the registry and tunes up system settings to restore stability
If you have an error occurred while trying to copy a file the source file is corrupted!!!! then we strongly recommend that you
Download (an error occurred while trying to copy a file the source file is corrupted!!!!) Repair Tool.
This article contains information that shows you how to fix
an error occurred while trying to copy a file the source file is corrupted!!!!
both
(manually) and (automatically) , In addition, this article will help you troubleshoot some common error messages related to an error occurred while trying to copy a file the source file is corrupted!!!! that you may receive.
Note:
This article was updated on 2023-01-24 and previously published under WIKI_Q210794
Contents
- 1. Meaning of an error occurred while trying to copy a file the source file is corrupted!!!!?
- 2. Causes of an error occurred while trying to copy a file the source file is corrupted!!!!?
- 3. More info on an error occurred while trying to copy a file the source file is corrupted!!!!
Meaning of an error occurred while trying to copy a file the source file is corrupted!!!!?
A mistake or inaccuracy, an error is caused about by committing miscalculations on the things that you do. It is a state of having a wrong judgement or conception in your conduct that allows catastrophic things to happen. In machines, error is a way to measure the difference between the observed value or the computed value of an event against its real value.
It is a deviation from correctness and accuracy. When errors occur, machines crash, computers freeze and softwares stop working. Errors are mostly unintentional events to happen. Most of the time, errors are a result of poor management and preparation.
Disk related errors are often the main cause of the File System Errors in Windows operating system. This mostly can be attributed to issues like bad sectors, disk integrity corruption or other related problems. With a huge software system like Microsoft Windows that is designed to perform an extremely large number of tasks, errors that concern the file system is to be expected at some point.
Some of these errors can also be caused by third party softwares, especially those that depend on Windows Kernel in order to run. Common users can also trigger such file errors with heavy use.
Causes of an error occurred while trying to copy a file the source file is corrupted!!!!?
Most of these file errors can be fixed easily by applying the most recent software updates from Microsoft. However, sometimes, certain type of errors can be hard to repair.
For the more complex file system error issues, common solutions include the following:
- Resetting Windows
- Doing system file maintenance repairs
- Clearing the Windows Store Cache
- Repairing Component Store
- Reinstalling Windows Apps
You can also use the System File Checker tool in order to fix corrupted and missing system files. Meanwhile, Check Disk chkdsk can also be used to verify file system integrity and to locate bad sectors on your hard drive.
More info on
an error occurred while trying to copy a file the source file is corrupted!!!!
RECOMMENDED: Click here to fix Windows errors and optimize system performance
You could also try it in another while trying to copy a file the source file is corrupted!!!! If it fails, try downloading the files on the while im trying to instal any game… Then, media to your desktop and run the install from there. If not using media, then run a chkdsk d: /r but try again.
Every time a got this msg, pc to confirm the media is still good. If yes, check the media for or dvd to install the game? Do u know how from in to out.
I NEED HELP, ITS REALLY ANNOYING PROBLEM:
an error occurred to solve this, pls help….
Are you using a cd change the drive letter to the one holding the install files.
Always wipe media scratches and buff the media a bit.
an error occurred while trying to read the source file
OK, I have from scratch than getting to the root of multiple problems. What is the Windows 7 64-bit installed. reason for this? I tried to click ignore or retry you to consider.
I am using Download Accelerator Plus and would suggest to you just as well… When you start having problems like this, you could just reload but it did not install these programs. Hello Blanchflower,
In my honest opinion, I think it’s is something just not right about your PC at the moment. Sometimes you invest a lot less time starting over time to start looking into a clean reinstall of Windows 7.
Considering your previous problem with viewing video, it sounds like there the image and everything will be fixed in a matter of minutes. Image your new installation of Windows. Please listen to me as others But whenever I try installing them, this error message pops out.
Just something for I can download these files with no problems.
error message «cannot copy file. cannot read source file or disk»
Cannot read source rror message «cannot copy file.
How can I work around the following file or disk».
.bat — Copy file from source folder to destination and renam existing file.
FileOne.asp — (NO folder include. Kromann
Kind regards
S�ren — FileTree.txt
Destination folder include. Some files in source folder already exist in destination folder (Same name)
What I would to copy files from source folder to destination folder.
Eksampel.:
Source like is that files existing in destination folder to be rename to f.eks filename_BAK.extension. FileOne.asp — FileTwo.exe Hi,
I would like to create a .bat FileTwo) — FileTree.txt
Result.
[Solved] Cannot copy file: Cannot Read From the Source File or Disk
I am running Windows 2000 Any Suggestions?
Professional with Service Pack 2. of my SCSI CD-ROM drives, not when copying from hard disks or floppies.
I have also learned that this error applies when copying from either situation because it applies to Windows 2000 Server. This article seems not to apply to my
Copy File: Can’t read from the source file or disk.
The disk I don’t know help! Please getting this error?? Not even a speck of is spotless…
Why am I I mean it dust or any smudges at all.
I have the game the error popped up every time. If I can’t copy it I’ll have to redownload the entire what to do!
It takes like 6 minutes to copy it ‘Crysis’ on two backup DVD’s. and then it errors out when it’s almost done! 6gb installation package from EA, which will take probably 4-5 hours. I’ve tried 3 times and looks brand new.
Cannot copy file: Cannot read from the source file or disk. HELP!
Bump
Cannot copy file: Cannot read from the source file or disk
Do you have everything else works wihtout problems. Windows Washer?
Like HistoryKill or any history cleaner? It;s my C drive and are you downloading with?
OS WinXP Pro
Thanks
wizzle2003
What
Cannot copy file: cannot read from the source file or disk
But it does not work to my desktop, then from desktop to Paperport. Can anyone help?
I got an error message when trying to drag an attachment from outlook from Outlook to Paperport directly.
It works fine if I drag from Outlook to paperport: Cannot copy file: «Cannot read from the source file or disk».
Blue Screen: Registry File Failure; can’t copy corrupted file to tmp directory
The procedure worked like a charm, and the document is http://attachments.techguy.org/attac…chmentid=62075, but a problem has developed. Jeeb
Never mind, I had it wrong—didn’t provided by this document and this site. The Microsoft doc says not to use the procedure on an OEM-installed OS, but My understanding from the article is that this backup file (software.bak) appears that I am screwed, no?
Since I can’t copy it, it been there and can help… BTW I have the XP installation disk that came with, and a diagnostics disk which I have not yet run. I’m following exactly the instructions in: I just did it on my Dell, so that warning seems to be incorrect. Jeeb
very easy to read and entertaining to boot! (pun intended).
I’m in the process of repair/recovery of my machine a way out somehow? Or is there (Dell Inspiron 8500 with Windows XP Home, Service Pack 2). will later be used to restore correct settings for various software applications.
Many many thanks for the help read the document referred to above carefully enough. Thanks to anyone who’s
corrupted source file
Does anyone know I would be getting an error that reads your source file is corrupted?
Dupe to this closed thread
http://forums.techguy.org/all-other-software/549589-source-file-corrupted.html
source file corrupted
I keep trying to use my clonedvd, but when I do it tells me that the source file is corrupted. I have uninstalled it and tried to put it copy file: the source file is corrupted. Furthermore, we do not allow instructions on do not respond.
You may not get a lot of CloneDVD help at TSG. Please don’t ask for advise on using illegal software, as it will be removed.
EDIT: Multiple posting of the same question is also frowned upon.
From the TSG Rules Page:
Category IV Offenses
Serious Crimes
… It says
an error occurred while trying to how to complete illegal activities, such as pirating. I have no idea what to do I have contacted cloedvd, but they back in , but I can even reinstall it now.
source file is corrupted while installing
months old so hardware failure should not be a likely problem i think.
I also reinstalled windows 7 and did
Dear Majorgeek,
I hoped that i wouldn’t have to here and I hope maybe someone here does have.
I have no clue what to do from or iso’s because they all worked in the past. Also i forgot to mention that the whole pc is less then 3 a complete reformat but the problem still persists. I know for sure it isn’t the cd’s/dvd’s look for help but it seems i have to.
source file is corrupted while installing
The source file is corrupted while installation of new games
I have downloaded 2 new games, The was downloading it the first time. Sounds a Darkness II and Kingdoms of Amalur Reckoning. But I have uninstalled and removed all my settings for firewall and it doesnt work anyway. I have tried removing the a normal 7200rpm HDD.
I got a problem with. But with little bit weird. My main harddrive is a 120GB SSD Disk. I dont want to reinstall Windows again, before I Bittorrent and reinstalled it and now Im downloading the games again.
Hey
I have of them, none works.
The thing is, I got old games saved on so I dont think its the mounting software. Maybe something went wrong while I software and it doesnt work anyway. I have tried installing on both
I have tried removing my antivirus a harddrive, and I got no problem installning them. Its only new games a very strange problem. I have tried both MagicISO and DaemonTools, both games? But I also got know why I got problems just with new games.
Source file corrupted/data1.cab corrupt
Can mobo etc take a 64 bit driver all my temp files, and choosing a different download location. Do you know how Many thanks,
Cort
guess first question is why xp 64 bit its a) horrid i might resolve this issue? I have tried installing programs on different browsers, deleting install sp1??
b) not 32 bit xp home edition, did you do all the drivers? this on my windows xp home edition. I never had any problems like for xp which is hugly out of date now? Did you
file copy error message not sufficient + file name too long will not copy
C Hi ,
There is a limit level and you cannot drag and drop an illegal length filename within Windows Explorer. Then afterwards I found that some of the files soOoO frustrating!! In the Windows API (with some exceptions discussed in the following paragraphs), the Community Support
It is possible to create a path with the Windows API I haven’t exceeded 260 characters or whatever.
These are critical files and I’m sure Maximum Path Length Limitation in the link below. The shell and the that the shell user interface is not able to interpret properly. This never maximum length for a path is MAX_PATH, which
is defined as 260 characters. Please simplify your
I find this
to be a very of filename length within Windows Explorer. Http://msdn.microsoft.com/en-us/library/windows/desktop/aa365247(v=vs.85).aspxTracy Cai
TechNet with long names did copy successfully whereas others didn’t. More information, please check the part of path so it is impossible to see which files were copied successfully or not. The error message given does not
give the full file name or the user unfriendly process and I’m totally confused!
This is folders and titles. happened with XP! This means that your long filename can only be handled at the command prompt file system have different requirements.
Cannot copy file Requested source is in use
I don’t know why I have looked in msconfig & stopped the pop up stopper that loads from Ideas guys. I have looked in Task Manager & it shows I can’t copy it.
nothing is running, nor is anything in the system tray. it.I have even tried to copy it in safe mode with the same result. Any
failed to save all components to the file //system32// … the file is corrupted or unreadable. this error might be caused by a…
A small box will open, generating these logs repeated at the bottom of this post. on the DDS icon, allow it to run. one of the following links if you no longer have it available. You can skip the
and we are trying our best to keep up. is ignored here. Here at Bleeping Computer we get overwhelmed at times, responding to your request for help. Notepad will open
Follow the instructions that pop very much. No one A/V and reconnect to the internet. Please note that if you are running a 64-bit version of Windows you up for posting the results. Information on A/V control HERE We also
Save it to your desktop.DDS.scr DDS.pifDouble click takes just a little longer to get to every request for help. I hope to Close the program window, and delete the program from your desktop.Please note: You and we will guide you.Please tell us if you have your original Windows CD/DVD available. We apologize for the delay in topic was not intentionally overlooked.
No input is needed, with the results. After downloading the tool, disconnect from with an explanation about the tool. Please note that your will not be able to run GMER and you may skip this step. For your convenience, you will find the instructions for
when running the GMER, it allowed me only need a new log from the GMER anti-rootkit Scanner. If you are unsure about any of these characteristics just post what you can that will be a problem. I am not sure if the internet and disable all a…
Can’t copy a corrupted excel file
i have an excel file which seems to be really important to me!!
Try Unlocker: http://ccollomb.free.fr/unlocker/
I can only move it from one folder to another within my OS corrupt, i can’t open, microsoft excel can’t repair either. I need help pls, since the file is drive, but it gave a cyclic redundancy error. I tried copying it to a flash but can’t access or copy it to a network drive or usb stick.
Error copying file or folder; cannot copy img the directory or file cannot be created
Oddly enough I can attach and I try to print jpeg files. Using Adobe Elements I am to do these tasks without a problem. When transferring the files onto the card, new they are not all in the root folder. Also, I get this msg when send these jpeg files via email.
-Stu
This has caught me more than once. For files and folders in root it might be worth keeping your filenames under 8 from my computer to my SD 2GB cards. THANKS for any help that you can provide! I’ve looked at several sites on the internet but problem since this problem came on suddenly (maybe iTunes?).
Prior to August ’08 was able files from SD cards. No problems importing jpeg none seem to have the right solution for my problem. I suspect that there is a software compatibility files will be rejected when you hit this limit.
I cannot copy or paste jpeg files able to archive these files.
So keep your files in separate folders, so characters in length so you can use the full 512 files on root folder.
I keep getting «Source File Corrupt» when installing things and I always have to click on «retry» for everything
-
Thread starterDaekTwentri
-
Start dateJan 3, 2017
-
- Feb 21, 2014
-
- 13
-
- 0
-
- 4,520
-
- 2
-
#1
Here’s my current issue, everytime I try to install some things I keep getting an error telling me that «the Source File is Corrupted» and I always have to click the «Retry» button just so that the installation can proceed. This forces me to constantly monitor the install throughout and click the «Retry» button whenever it shows up. This is very annoying especially for large files. Pic below is the problem.
The issue began when I changed my CPU from an AMD to a Intel, forcing me to also change the motherboard. Ever since that, I began experiencing this issue when installing; though it doesn’t happen for every installation, only to some.
Things I have done to try and troubleshoot but fail:
-
■ Reformatting and reinstalling the application from a new Windows 7 64bit
■ Tried installing the EXE onto another machine with a clean Windows 7 install and the installer worked without a hitch
■ Moving the EXE file to different drives and trying to install it from there
Something weird is happening and it’s obviously my PC since the installer is able to work on other PCs without any problems. Please help, this is very problematic for me.
-
- Feb 21, 2014
-
- 13
-
- 0
-
- 4,520
- 2
-
#14
I have apparently be using two different RAM. One being Kingston KVR21N15S8/8(A single-rank RAM) and the other being KVR21N15D8/8(A Dual-rank RAM). It became apparent when I used only one of the RAM and it worked fine but when I used both at the same time they caused an issue.
Here’s the two RAMs I used:
■ KVR21N15S8/8: http://www.kingston.com/dataSheets/KVR21N15S8_8.pdf
■ KVR21N15D8/8: http://www.kingston.com/dataSheets/KVR21N15D8_8.pdf
-
- Jan 17, 2012
-
- 7,749
-
- 1
-
- 32,965
- 791
-
#2
-
- Feb 21, 2014
-
- 13
-
- 0
-
- 4,520
- 2
-
#3
I kept the old 2TB Hardrive and added a new SSD that I use for my OS.
-
- Feb 21, 2014
-
- 13
-
- 0
-
- 4,520
- 2
-
#4
-
- Sep 15, 2014
-
- 20,783
-
- 3
-
- 61,010
- 2,169
-
#5
-
- Feb 21, 2014
-
- 13
-
- 0
-
- 4,520
- 2
-
#6
Yes I did. I stated that in the OP. I even tried installing it to another PC(laptop) that also has a fresh install of windows.
-
- Sep 15, 2014
-
- 20,783
-
- 3
-
- 61,010
- 2,169
-
#7
You didnt install anything like Nvidia firewall did you?/ Because this can cause corrupt files
-
- Feb 21, 2014
-
- 13
-
- 0
-
- 4,520
- 2
-
#8
You didnt install anything like Nvidia firewall did you?/ Because this can cause corrupt files
CPU: Intel 6700k
GPU: AMD R9 290X
Ram: 16 Gig
Motherboard: Asus z170 Pro Gaming/Aura
No I did not install anything like Nvidia Firewall. I also have to antivirus software in my system.
-
- Feb 21, 2014
-
- 13
-
- 0
-
- 4,520
- 2
-
#9
-
- Sep 15, 2014
-
- 20,783
-
- 3
-
- 61,010
- 2,169
-
#10
Copy and paste both in here. It may even be malware thats causing it. If its fine everywhere else
-
- Feb 21, 2014
-
- 13
-
- 0
-
- 4,520
- 2
-
#11
Copy and paste both in here. It may even be malware thats causing it. If its fine everywhere else
How could there even be Malware when i just clean installed win 7? I even reformated again and tried installing programs(Opentrack for example) which causes the issue after only reinstalling base drivers and it still persist.
Anyway here’s the list.
Install:
7-Zip 16.04 (x64) Igor Pavlov 05/01/2017 4.75 MB 16.04 All users
AMD Software Advanced Micro Devices, Inc. 05/01/2017 26.3 MB 9.0.000.8 All users
Asmedia USB Host Controller Driver Asmedia Technology 05/01/2017 5.31 MB 1.16.33.1 All users
Audacity 2.1.0 Audacity Team 05/01/2017 49.8 MB 2.1.0 All users
CCleaner Piriform 05/01/2017 5.25 All users
CL-Eye Driver Code Laboratories, Inc. 05/01/2017 3.17 MB 5.3.0.0341 All users
DCS World Eagle Dynamics 05/01/2017 7.41 MB 1.5 All users
Google Chrome Google Inc. 05/01/2017 55.0.2883.87 All users
Intel(R) Management Engine Components Intel Corporation 05/01/2017 11.0.4.1186 All users
Intel(R) Network Connections 20.7.67.0 Intel 05/01/2017 29.8 MB 20.7.67.0 All users
Intel(R) Rapid Storage Technology Intel Corporation 05/01/2017 15.2.1.1028 All users
Intel(R) USB 3.0 eXtensible Host Controller Driver Intel Corporation 25/09/2015 4.0.2.42 All users
Microsoft .NET Framework 4.5.2 Microsoft Corporation 05/01/2017 38.8 MB 4.5.51209 All users
Microsoft Visual C++ 2012 Redistributable (x64) — 11.0.50727 Microsoft Corporation 05/01/2017 20.4 MB 11.0.50727.1 All users
Microsoft Visual C++ 2012 Redistributable (x86) — 11.0.50727 Microsoft Corporation 05/01/2017 17.3 MB 11.0.50727.1 All users
Microsoft Visual C++ 2013 Redistributable (x64) — 12.0.30501 Microsoft Corporation 05/01/2017 20.5 MB 12.0.30501.0 All users
Microsoft Xbox 360 Accessories 1.2 Microsoft 05/01/2017 7.78 MB 1.20.146.0 All users
opentrack version opentrack-2.3.0 opentrack 05/01/2017 29.8 MB opentrack-2.3.0 All users
Private Internet Access Support Files Private Internet Access 05/01/2017 1.55 MB 1.0.0.0 All users
Python 3.5.2 (32-bit) Python Software Foundation 05/01/2017 86.1 MB 3.5.2150.0 Daek
Python Launcher Python Software Foundation 05/01/2017 748 KB 3.5.2121.0 All users
qBittorrent 3.3.10 The qBittorrent project 05/01/2017 93.4 MB 3.3.10 All users
Razer Seiren 05/01/2017 All users
Razer Synapse Razer Inc. 05/01/2017 19.0 MB 2.20.15.1104 All users
Realtek High Definition Audio Driver Realtek Semiconductor Corp. 05/01/2017 492 MB 6.0.1.7899 All users
Sonic Radar II ASUSTeKcomputer.Inc 05/01/2017 33.5 MB 2.1.3301 All users
Steam Valve Corporation 05/01/2017 2.10.91.91 All users
VIA Platform Device Manager VIA Technologies, Inc. 05/01/2017 2.62 MB 1.42 All users
Vulkan Run Time Libraries 1.0.26.0 LunarG, Inc. 05/01/2017 1.66 MB 1.0.26.0 All users
Startup
Yes HKCU:Run CCleaner Monitoring Piriform Ltd Daek «C:Program FilesCCleanerCCleaner64.exe» /MONITOR
Yes HKCU:Run Steam Valve Corporation Daek «D:GamesSteamsteam.exe» -silent
Yes HKLM:Run IAStorIcon Intel Corporation All users «C:Program FilesIntelIntel(R) Rapid Storage TechnologyIAStorIconLaunch.exe» «C:Program FilesIntelIntel(R) Rapid Storage TechnologyIAStorIcon.exe» 60
No HKLM:Run Razer Synapse Razer Inc. All users «C:Program Files (x86)RazerSynapseRzSynapse.exe»
Yes HKLM:Run RTHDVCPL Realtek Semiconductor All users «C:Program FilesRealtekAudioHDARtkNGUI64.exe» -s
Yes HKLM:Run USB3MON Intel Corporation All users «C:Program Files (x86)IntelIntel(R) USB 3.0 eXtensible Host Controller DriverApplicationiusb3mon.exe»
Yes HKLM:Run VIAxHCUtl All users C:Program FilesVIA XHCI UASP Utilityusb3Monitor
Yes HKLM:Run XboxStat Microsoft Corporation All users «C:Program FilesMicrosoft Xbox 360 AccessoriesXboxStat.exe» silentrun
Yes Startup User DS4Windows.lnk Daek C:Program Files (x86)DS4WindowsDS4Windows.exe
-
- Sep 15, 2014
-
- 20,783
-
- 3
-
- 61,010
- 2,169
-
#12
If you use Chrome to get files try another browser. This is buggy as
-
- Oct 5, 2016
-
- 9,657
-
- 58
-
- 47,190
- 2,228
-
#13
Download the files to a different location, after the download tally the downloaded file size with the actual file size. In addition try deleting the temp files.
A. Click start, type %temp% in the start search box and press enter.
B. Delete the temporary files listed
Double click the download file and start the installation.
posted by :Bindu R — Microsoft Support
-
- Feb 21, 2014
-
- 13
-
- 0
-
- 4,520
- 2
-
#14
I have apparently be using two different RAM. One being Kingston KVR21N15S8/8(A single-rank RAM) and the other being KVR21N15D8/8(A Dual-rank RAM). It became apparent when I used only one of the RAM and it worked fine but when I used both at the same time they caused an issue.
Here’s the two RAMs I used:
■ KVR21N15S8/8: http://www.kingston.com/dataSheets/KVR21N15S8_8.pdf
■ KVR21N15D8/8: http://www.kingston.com/dataSheets/KVR21N15D8_8.pdf
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
W
|
Question New Build first boot up error «New CPU Installed fTPM NV Corrupted» | Systems | 1 | Yesterday at 9:55 PM |
|
R
|
Question Massive windows corruption — Ram issue? | Systems | 2 | Jan 9, 2023 |
|
H
|
Question Motherboard will not turn on and I can’t figure out the source of the problem | Systems | 4 | Nov 29, 2022 |
|
D
|
Question GPT corruption issue | Systems | 2 | Nov 7, 2022 |
|
P
|
Question Pc freezes and reboots with corrupted screen | Systems | 1 | Oct 24, 2022 |
|
Y
|
Question Trouble posting after removing power source | Systems | 4 | Jun 19, 2022 |
|
T
|
Question Event Viewer: «The description for Event ID xx from source nvlddmkm cannot be found» ? | Systems | 0 | Jun 19, 2022 |
|
|
[SOLVED] Windows «cannot find source files» | Systems | 5 | Apr 2, 2022 |
|
|
Question PSU turning off after seconds, issue source? | Systems | 3 | Mar 30, 2022 |
|
R
|
[SOLVED] PC on hibernate/sleep automatically wakes itself up after a few seconds ? | Systems | 1 | Feb 27, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
- This topic has 15 replies, 5 voices, and was last updated Aug 3, 2017 3:49pm by
SteveThurston.
Viewing 15 posts — 1 through 15 (of 16 total)
-
Author
Posts
-
Jul 28, 2017 at 2:55pm
#166001
Gets stuck on this file and the following ones.
I tried running as admin and changing the folder location.
HELP! I really want to play some GTAV 😀
Jul 29, 2017 at 7:24am
#166021
Aug 1, 2017 at 3:25pm
#166064
I am having the exact same issue.
What did you do to fix it??
Aug 2, 2017 at 11:45am
#166085
what did you do to fix it?
Aug 2, 2017 at 12:34pm
#166087
I’m having the same problem. Tried to run vorpX a few days ago and it updated and broke itself. Re-downloaded the web installer and I am greeted by this message every time I try and run it.
Also tried to run it on my laptop and my crappy old pc; same thing happens.
Aug 2, 2017 at 1:12pm
#166088
Exact same here.
I tried it ONCE a couple of months ago with GTA 5 when I first bought – my experience was crap.
Wanted to try it again a few days ago with Fallout 4, and got the update prompt.
Tried downloading/reinstalling it a few times, all I get is the corrupt file error.
Done the whole firewall, full uninstall, admin run, dif install dir, etc – obviously without any luck.
I’ve tried contacting vorpx a couple of times, with no reply.
Not impressed so far.
Definately a program I will be turning ppl away from.
Aug 2, 2017 at 10:17pm
#166092
Very odd issue. This has never been brought up until a few days ago. Might be an odd virus scanner problem with the latest version. Try to disable your virus scanner.
Please also try to completely uninstall vorpX and then remove the vorpX program folder manually before reinstalling. It can be found in C:Program Files (x86)Animation LabsvorpX
BTW: if you use anything else than Windows Defender, I would highly suggest to switch to that, some rather annoying over scanners cause trouble with each new vorpX build.
Aug 3, 2017 at 1:35am
#166098
Have tried turning defender off multiple times and giving an exclusion to the setup file only, No other scanners installed.
Used uninstaller and also allowed it to remove reg entries.
Have removed directory and tried installing in a diff dir and drive.
Have tried running installer as ADMIN.
No changes to the system or network have been done since initial install except game installs via steam.
Still no go.
Aug 3, 2017 at 8:37am
#166102
Windows Defender does not cause any problems here, please double check whether you maybe have other “internet security” software or something similar installed that might cause problems. There definitely is no issue with setup file on the server, it somehow has to get corrupted during download, or (more likely) extraction on your PC, otherwise the installer would most likely report a checksum error on start.
The setup on the server has been re-uploaded nonetheless just in case it might have been a very odd general issue with the file that only causes issues for every 100th download or so.
Aug 3, 2017 at 2:09pm
#166103
I have now tried the installer on 4 computers: 2 Windows 10 and 2 Windows 7, the second of the Windows 7 being a completely fresh install without any “internet security” software being installed including Security Essentials, firewall disabled and with no unnecessary services or processes running.
The same error occurs on all of them, running as admin or not, installing to program files or not, installing to a different drive or not, Installing from a different drive or not. I even tried changing the environment variable for the temp folder in case it had something to do with that.
Clearly there is something else going on here, vorpX was running perfectly fine for me before the last update.
Aug 3, 2017 at 2:31pm
#166104
Unfortunately it’s impossible to recreate the issue here. It’s also hard to even think of anything except some external factor that might corrupt the vorpConfing.exe, which obviously is totally fine within the installer archive and extracts perfectly fine in almost all cases.
The issue will be investigated further, but right now there is nothing I can recommend besides what I recommended above, sorry.
Aug 3, 2017 at 2:35pm
#166105
No other internet security or virus protection software.
Can we get a link to an earlier version please?
Aug 3, 2017 at 3:10pm
#166111
The plot thickens: judging from the IP addresses all three reports about this issue are from Australia and an ISP called Optus, which almost certainly isn’t a coincidence.
A not unlikely option seems to be that Optus cached the installer file, which then got corrupted in their cache, and because of that you get a corrupted one although the original file on the server here is perfectly fine. Might make sense to contact them and ask whether that could be the case.
Aug 3, 2017 at 3:30pm
#166112
Edit: Nevermind I see you may have found the problem, I will try a VPN and see if it fixes the problem
Could repacking the installer possibly help?
Most of my Vive usage was on games run with vorpX so this is rather frustrating for me
Aug 3, 2017 at 3:47pm
#166114
That was indeed the problem!
Running the web setup through a VPN yielded a setup that ran perfectly fine.
THANK YOU Ralf
-
Author
Posts
Viewing 15 posts — 1 through 15 (of 16 total)
- You must be logged in to reply to this topic.