- 30 Июн 2006
Принтер Samsung ML-1250, ошибка при подаче листа бумаги
Принтер Samsung ML-1250, ошибка при подаче листа бумаги — поочередно мигают красный,зеленый потом оранжевый индикатор.
При печати тестовой страницы та самая проблема
- 30 Июн 2006
Системная ошибка. Выключить принтер, через некоторое время включить, если ошибка не исчезнет, то причины могут быть в
1. Грязь (тонер) на главной плате. Чистить всё.
2. Контакты картриджпринтер
3. Пайкаглючность на самой главной плате (болеют самсунги этим).
4. Высоковольтный блок (чистота — залог здоровья).
- 1 Июл 2006
я бы попробовал подать бумагу с ручной подачи и посмотреть результат ,кстати в этой ветке форума недавно выкладывали список ошибок для 1210 я предполагаю что они одинаковые
- 1 Июл 2006
ошибка системная. может быть что угодно
- 1 Июл 2006
Смотри fuser(печка) там либо датчик либо сама лампа(разрыв контакта) частенько такое у них бывает.удачи
- 3 Июл 2006
ссылка скрыта от публикации
- 8 Июл 2006
Марченко Сергей Александр, спасибо.
«сама лампа(разрыв контакта)» оторвался (отламался) контакт от лампы
- 14 Июл 2006
После замены лампы принтер заработал
|
0 / 0 / 0 Регистрация: 24.01.2019 Сообщений: 10 |
|
|
1 |
|
|
11.02.2019, 13:03. Показов 1806. Ответов 5
В чём может быть проблема? Подключен к ноутбуку с виндовс 10. ОС видит принтер, но когда отправляешь на распечатку, выскакивает ошибка. Вначале не заметил, возникала ли ошибка до отправки на печать. Но потом, после перезагрузки принтера, ошибка всё равно появляется, даже если отменить печать. Ошибка эта высвечиватся на самом принтере. Какие причины могут её вызывать? Пробовали принтер перезаправить, но ошибка никуда не делась. Добавлено через 4 минуты
__________________
0 |
|
348 / 225 / 61 Регистрация: 06.12.2015 Сообщений: 874 |
|
|
11.02.2019, 14:29 |
2 |
|
Ошибка эта высвечиватся на самом принтер Вам то видно, что высвечивается, а нам нет!!!
Пробовали принтер перезаправить Наверно всеж картридж, а не принтер!
0 |
|
1377 / 764 / 202 Регистрация: 10.02.2018 Сообщений: 3,157 |
|
|
11.02.2019, 14:48 |
3 |
|
0 |
|
0 / 0 / 0 Регистрация: 24.01.2019 Сообщений: 10 |
|
|
11.02.2019, 17:35 [ТС] |
4 |
|
Счас приеду домой — посмотрю. И точнее напишу. Добавлено через 1 час 27 минут
0 |
|
348 / 225 / 61 Регистрация: 06.12.2015 Сообщений: 874 |
|
|
11.02.2019, 19:46 |
5 |
|
Но застрявшей бумаги там нет А аппаратик видит застрявшую бумагу у себя внутри, а видит он датчиками прохода бумаги. Поэтому первым делом проверить датчики прохода бумаги, может быть флажок датчика залип иль еще что-то. Проверить надо обязательно два датчика—регистрации и выходной после печки!
1 |
|
0 / 0 / 0 Регистрация: 24.01.2019 Сообщений: 10 |
|
|
11.02.2019, 20:18 [ТС] |
6 |
|
Ага. Спасибо.
0 |
Не работает Samsung ML-1250
| Сообщение #1
Отправлено 20 ноября 2007 — 14:21
После заправки картриджа принтер отказывается работать. При включении начинается прогрев, но очень быстро всё прекращается и загораются два светодиода «Ошибка» и «Бумага». На вставку в лоток бумаги не реагирует. Подскажите, что это может быть и если возможно способы устранения неисправностей. заранее благодарен всем за оказаную помощь.
- Наверх of the page up there ^
-
0
| Сообщение #2
Отправлено 20 ноября 2007 — 19:17
koka
Смотри термостат или ещё называют термистор или ещё-термопредохранитель…
Он расположен во фьюзере, по нашему в печке…он такой круглый и блестящий.
Скорее всего накопился тонер (закоксовался) под ним,
вот и не входит в температурный режим или лампа нагрева -перегрев возможно…
Но это предварительно, хотелось бы , что бы, озвучили-
1)кол-во сделанныхотпечатков,
2)сколько заправок отходил картридж,
3)чем заправляли, какой тонер
4)какую бумагу использовали,
5)делалось ли ТО принтера?
Самый идеальный и надёжный принтер…фломастеры.
- Наверх of the page up there ^
-
0
| Сообщение #3
Отправлено 21 ноября 2007 — 08:31
Vitaly_2005
Нечто подобное уже приносили — лекарство простая профилактика и чистка — уж очень любит засорятся Самсунг данной модели с верхней подачей бумаги так и любит как пылесос глотать мусор, особенно тонер (а это, кстати, или неправильная, неаккуратная заправка — либо так пользуются принтером)…. 
Ссылки в подписи запрещены правилами форума.
- Наверх of the page up there ^
-
0
| Сообщение #4
Отправлено 21 ноября 2007 — 16:06
КАТ
… судя по startcopy, если это случилось после заправки — то так хорошо заправили… что принтер картридж не видит.
На технические вопросы, обсуждаемые на форуме, в PM не отвечаю. Пишите в соответствующие темы форума.
СНПЧ, ДЗК и разливными чернилами — не пользуюсь принципиально. Оригинальная расходка — залог качественной печати, долгой и счастливой жизни принтера, и спокойствия его пользователя — ежедневно подтверждается практикой. Не верите? — почитайте форум.
- Наверх of the page up there ^
-
0
| Сообщение #5
Отправлено 21 ноября 2007 — 19:10
koka
Автор пока не ответил на вышезаданные вопросы…поэтому считаю
выводы делать преждевременно, а старткопи я регулярно посещаю…
так что…подождём автора…
Самый идеальный и надёжный принтер…фломастеры.
- Наверх of the page up there ^
-
0
| Сообщение #6
Отправлено 22 ноября 2007 — 08:59
Proctor
Некоторые подробности по ситуации
Количество сделаных копий — точных данных нет
Картридж — первая заправка.( до этого был другой картридж, о нём данных нет)
Тонер — Barcon Samsung ML-1210
Бумага стандарт 80г
До печки ещё не добирался (не было когда)
По поводу качества заправки — это не первый мной заправленый картридж (после появления неисправности картридж перебирался )
- Наверх of the page up there ^
-
0
| Сообщение #7
Отправлено 22 ноября 2007 — 09:06
koka
2 KAT
Да нет, просто интересующиеся пусть полностью читают Старткопи, я за, это так сказать хитрость такая, я сам её читаю, полезно…вообще-то надо ссылку «братскую»
сделать.
Самый идеальный и надёжный принтер…фломастеры.
- Наверх of the page up there ^
-
0
| Сообщение #8
Отправлено 22 ноября 2007 — 09:49
Proctor
Разобрал печку, нашел маленький кусочек бумаги, всё продул от пыли, собрал — эффекта ноль
- Наверх of the page up there ^
-
0
| Сообщение #9
Отправлено 22 ноября 2007 — 20:24
koka
Ну… на вск случай подкинь для начала другой картридж.
А, печка разогревается?
И ещё раз повтори, только точно…
КАК светодиоды сигнализируют…горят постоянно или моргают?
Если горят постоянно светодиоды «бумага» и «данные»-то застревание бумаги или
её (бумаги) части (обрывка)
ИЛИ не опознаётся картридж с тонером (нет его, не вставлен)
Если МИГАЮТ светодиоды «бумага» и «данные»-то что-то с узлом закрепления (печка)
Самый идеальный и надёжный принтер…фломастеры.
- Наверх of the page up there ^
-
0
| Сообщение #10
Отправлено 24 ноября 2007 — 09:23
Proctor
Подкидывал другой картридж — таже ошибка
Печка нагревается
Светодиоды горят постоянно
- Наверх of the page up there ^
-
0
| Сообщение #11
Отправлено 24 ноября 2007 — 19:49
koka
Цитирую себя же:»Если горят постоянно светодиоды «бумага» и «данные»-то застревание бумаги или её (бумаги) части (обрывка)»
Так может датчик бумаги залип или отломался…а может и обрывок где…
Проверь датчики бумаги, «флажки»…
Ну не быват чудес…
Самый идеальный и надёжный принтер…фломастеры.
- Наверх of the page up there ^
-
0
- ← Предыдущая тема
- Ремонт принтеров и копиров
- Следующая тема →
- Вы не можете создать новую тему
- Вы не можете ответить в тему
1 человек читают эту тему
0 пользователей, 1 гостей, 0 скрытых пользователей
- Manuals
- Brands
- Samsung Manuals
- Printer
- Lazett ML-1250
- User manual
-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
Related Manuals for Samsung ML-1250
Summary of Contents for Samsung ML-1250
-
Page 3
Contents Introduction Setting Up Your Printer STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 Using Control Panel Print Media… -
Page 4
Printing Tasks Maintaining Your Printer Problem Solving Appendix INDEX… -
Page 5: Laser Safety Statement
Environmental and Safety Consideration Laser Safety Statement WARNING Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes.
-
Page 6: Ozone Safety
Environmental and Safety Consideration Ozone Safety Power Saver…
-
Page 7: Radio Frequency Emissions
Environmental and Safety Consideration Radio Frequency Emissions Fcc Regulations CAUTION: Changes or modifications not expressly approved by the manufacture responsible for compliance could void the user’s authority to operate the equipment. Canadian Radio Interference Regulations…
-
Page 8
Environmental and Safety Consideration Declaration of Conformity (European Countries) Approvals and Certifications… -
Page 9
chapter… -
Page 10: Special Features
Special Features Print with excellent quality and high speed Flexible paper handling Save your time and money NTRODUCTION…
-
Page 11
Special Features Create professional documents Dear ABC Regards WORLD BEST Expand the printer capacity Print in various environments NTRODUCTION… -
Page 12: Printer Components
Printer Components Front View NTRODUCTION…
-
Page 13: Inside View
Printer Components Inside View Rear View NTRODUCTION…
-
Page 14
chapter STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7… -
Page 15: Unpack Your Printer
Unpack Your Printer Notes: • If any items are missing or damaged, notify your dealer immediately. • Components may differ from one country to another. * contains the printer driver, the User’s Guide, the Adobe Acrobat Reader program, and the Make Your Own Diskette setup software.
-
Page 16: Install The Toner Cartridge
Install the Toner Cartridge CAUTION: To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper, if left exposed for more than a few If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water.
-
Page 17
Install the Toner Cartridge When printing text at 5% coverage, you can expect a toner cartridge life of approximately 2,500 pages (1,000 pages for the toner cartridge that is shipped with the printer). ETTING RINTER… -
Page 18: Load Paper
Load Paper ETTING RINTER…
-
Page 19
Notes: • Do not push the width guide far enough to cause the media to warp. • If you do not adjust the width guide, it may cause paper jam. • If you are needed to add more sheets of paper while printing, remove the remaining paper from the tray at first. -
Page 20: Connect To The Computer
Connect to the Computer with a Parallel Cable Note: To connect the printer to the parallel port of the computer ETTING RINTER requires a certified parallel cable. You will need to buy the IEEE1284 compliant cable.
-
Page 21: Turn On The Printer
Turn on the Printer Print a Demo Page! Demo ML-1250 Laser Beam Printer Excellent Performance, High Quality Cost Saving, Convenience Compatibility ETTING RINTER…
-
Page 22: Install The Printer Software
Install the Printer Software Before Installing the Printer Software ETTING RINTER…
-
Page 23: Installing The Printer Software From The Cd-Rom
Installing the Printer Software from the CD-ROM Note: If the New Hardware Found box appears during the installation procedure, click the x in the upper right corner of the box, or click Cancel. Install the Printer Software ETTING RINTER…
-
Page 24
Install the Printer Software 2.10 ETTING RINTER… -
Page 25: Software Installation Tips
Install the Printer Software Software Installation Tips 2.11 ETTING RINTER…
-
Page 26
Install the Printer Software 2.12 ETTING RINTER… -
Page 27: Installing Software From Diskette
Installing Software from Diskette Making Installation Diskettes 2.13 ETTING RINTER…
-
Page 28
Installing Software from Diskette 2.14 ETTING RINTER… -
Page 29: Installing Software
Installing Software from Diskette Installing Software 2.15 ETTING RINTER…
-
Page 30
chapter… -
Page 31: Control Panel Buttons
Control Panel Buttons Toner Save Cancel/Reprint Demo Print demo page Demo Demo Start manual feeding Manual Feeder Paper Source Demo Clean the inside of the printer Demo SING ONTROL ANEL…
-
Page 32
Control Panel Buttons Cancel/Reprint Toner Save Toner Save SING ONTROL ANEL Cancel job Cancel/Reprint Error If the Cancel/Reprint button is accidentally Note: pushed, the job must be reprinted. There is no undo function. Reprint last page of the job Cancel/Reprint Turn the Toner Save Mode on/off Toner Save Toner Save Mode… -
Page 33: Control Panel Lights
Control Panel Lights Control Panel Light Message Error Paper Data Data Error Paper Data Cancel/Reprint Error Paper Data Error Paper Data Demo Error Ready mode Demo Processing Paper out Demo Waiting for the Demo button to be pressed Demo SING ONTROL ANEL…
-
Page 34
chapter… -
Page 35: Choosing Paper And Other Media
Choosing Paper and Other Media Desired outcome Size Weight Brightness Surface smoothness CAUTION: specification listed in the paper specification can cause problems that may require service. This service is not covered by the warranty or service agreements. Using media that does not conform to the RINT EDIA…
-
Page 36: Media Sizes And Capacities
Choosing Paper and Other Media Media Sizes and Capacities Input Source/Capacity* Media Size Manual Input Tray Automatic Input Tray Plain Paper Envelopes Labels Transparency film Card stock Bond Paper Thin Paper Thick Paper RINT EDIA…
-
Page 37: Paper Guidelines
Choosing Paper and Other Media Paper Guidelines cause paper jams only Use only Do not Do not Do not Avoid Do not Do not Keep RINT EDIA…
-
Page 38: Selecting The Output Location
Selecting the Output Location face-up output slot face-down output tray printing to the face-up output slot do not change the position of the output lever Printing to the Face-Down Output Tray face-down in correct order Printing to the Face-Up Output Slot face-up RINT EDIA…
-
Page 39: Loading Paper
Loading Paper Using the Automatic Input Tray Using the Manual Input Tray To avoid a paper jam, use the manual tray with the automatic input tray loaded with Note: paper. with the print side up Do not Before using the automatic input tray, you must remove Note: paper from the manual input tray.
-
Page 40
Loading Paper Manual Feeder Source Demo Notes: • The face-up output slot may not hold the printed pages properly. • The printed pages will not stack in the face-down output tray unless you change output lever position. After you finish using the face-up output slot, you must change the position of the output lever to the normal position. -
Page 41: Printing On Envelopes
Printing on Envelopes Guidelines with the flap side down on the right side stamp area enters the tray first with the RINT EDIA…
-
Page 42
Printing on Envelopes RINT EDIA… -
Page 43: Printing On Heavy Paper
Printing on Heavy Paper Guidelines with print side up Bond RINT EDIA…
-
Page 44: Printing On Labels
Printing on Labels Guidelines with print side up To prevent them from sticking Note: together, do not let the printed label sheets stack up as they are printed out. 4.10 RINT EDIA…
-
Page 45: Printing On Transparencies
Printing on Transparencies Guidelines with the print side up the adhesive strip entering the printer first. Notes: • To prevent transparencies from sticking together, do not let the printed sheets stack up as they are printed out. • Place transparencies on a flat surface after removing them from the printer.
-
Page 46: Printing On Preprinted Paper
Printing on Preprinted Paper Guidelines with the design face up, and the bottom edge toward the printer 4.12 RINT EDIA…
-
Page 47
Printing on Card Stock or Custom-sized Media Guidelines with the print side up and the short edge first If the size of your print media is not Note: listed in the Paper Size box in the Paper tab of the printer driver properties, select Custom Size and set the paper size manually. -
Page 48
chapter… -
Page 49: Printing A Document
Printing a Document RINTING ASKS…
-
Page 50
Printing a Document RINTING ASKS… -
Page 51
Printing a Document œ œ œ œ œ œ œ œ RINTING ASKS… -
Page 52
1. Click the Windows Start button. 2. Select Settings, and then Printers to open the Printers window. 3. Select the Samsung ML-1250 PCL 6 printer icon. 4. Click the right mouse button and select Properties to open the properties window. -
Page 53: Canceling A Print Job
Printing a Document Canceling a Print Job Using Help RINTING ASKS…
-
Page 54: Using Toner Save Mode
Using Toner Save Mode To enable or disable the Toner Save mode from the Note: control panel, the Toner Save Mode option in the printer driver must be set to Printer Setting. See below. RINTING ASKS…
-
Page 55
rinting Multiple Pages on One Sheet of Paper œ¤ œ¤ œ¤ œ¤ (N-Up Printing) RINTING ASKS… -
Page 56: Fitting Your Document To A Selected Paper Size
Fitting Your Document To a Selected Paper Size RINTING ASKS…
-
Page 57: Printing Posters
Printing Posters œ œ œ œ RINTING ASKS…
-
Page 58
Printing Posters ➛ ➛ ¤ ¤ ¤ ¤ ➛ ➛ ¤ ¤ ¤ ¤ ➛ ➛ ¤ ¤ ¤ ¤ ➛ ➛ ¤ ¤ ¤ ¤ œ œ ¤ ¤ ¤ ¤ œ œ ¤ ¤ ¤ ¤ œ œ ¤ ¤ ¤ ¤ œ… -
Page 59: Setting Graphic Properties
Setting Graphic Properties 5.11 RINTING ASKS…
-
Page 60
Setting Graphic Properties Resolution SRT Mode When 600 dpi is selected in the Resolution section, Note: selecting Text Enhance or Image Enhance gives you an image quality of 1200 dpi class . 5.12 RINTING ASKS… -
Page 61
Graphic Mode Halftoning What is Halftone? Gray-scale objects (such as photographs) whose gray dots have been converted to a pattern of groups of black dots. These groups, which are of various sizes, along with the white dots (pixels turned off), create illusions of gray shading: larger groups make the image appear black or dark gray, while… -
Page 62: Printing Watermarks
Printing Watermarks To use an existing watermark 5.14 RINTING ASKS…
-
Page 63
Printing Watermarks To create or edit a watermark 5.15 RINTING ASKS… -
Page 64
Printing Watermarks To delete a watermark 5.16 RINTING ASKS… -
Page 65: Using Page Overlay
Using Page Overlay What is an Overlay? Dear ABC Regards WORLD BEST Creating a New Page Overlay WORLD BEST 5.17 RINTING ASKS…
-
Page 66
Using Page Overlay Using Page Overlay 5.18 RINTING ASKS The overlay document size must be the same as Note: documents you will print with the overlay. -
Page 67
Using Page Overlay 5.19 RINTING ASKS… -
Page 68
Using Page Overlay Deleting a Page Overlay 5.20 RINTING ASKS… -
Page 69: Reprinting The Last Page
To disable this feature: 1. From the Start menu, select Settings and then Printers. 2. Click the right mouse button on the Samsung ML-1250 PCL 6 printer icon and select Properties to open the properties window.
-
Page 70: Printing On A Network Environment
Printing on a Network Environment Setting Up Host Computer 5.22 RINTING ASKS You need to install the Samsung ML-1250 printer driver Note: on each computer that will print documents to the printer.
-
Page 71
Printing on a Network Environment Setting Up Client PC 5.23 RINTING ASKS… -
Page 72
chapter… -
Page 73: Maintaining Toner Cartridge
Maintaining Toner Cartridge Toner cartridge storage The printer warranty does not cover damage caused by using a refilled cartridge. Toner cartridge life expectancy Recycling toner cartridge Saving toner Toner Save Toner Save Mode AINTAINING RINTER…
-
Page 74: Redistributing Toner
Maintaining Toner Cartridge Redistributing Toner CAUTIONS: • Avoid reaching too far into the printer. The fusing area may be hot. • To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. AINTAINING RINTER…
-
Page 75
If the toner gets on your Note: clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. If the print remains light Maintaining Toner Cartridge AINTAINING RINTER… -
Page 76: Cleaning The Printer
Cleaning the Printer Notes: • Do not use ammonia-based cleaners or volatile solvents such as thinner, on or around the printer. These can damage the printer. • While cleaning the inside of the printer, be careful not to touch the transfer roller (located underneath the toner cartridge ).
-
Page 77
Printing a cleaning sheet The cartridge Note: cleaning process takes some time. To stop the printing, turn the power off. Demo Cleaning the Printer AINTAINING RINTER… -
Page 78
chapter… -
Page 79: Troubleshooting Checklist
Troubleshooting Checklist ROBLEM OLVING…
-
Page 80: Solving General Printing Problems
Solving General Printing Problems ROBLEM OLVING…
-
Page 81
Solving General Printing Problems ROBLEM OLVING… -
Page 82
Solving General Printing Problems ROBLEM OLVING… -
Page 83
Solving General Printing Problems ROBLEM OLVING… -
Page 84: Clearing Paper Jams
Clearing Paper Jams Output Area Paper jams in this area may result in loose toner on the page. If you get any toner on your Note: clothes, wash them in cold water because hot water will set the toner into the fabric. ROBLEM OLVING…
-
Page 85
Input Area If paper has entered the toner cartridge area, follow the instructions on page 7.8. It is Note: easier to remove such jams from the inside of the printer than the paper input area. Clearing Paper Jams ROBLEM OLVING… -
Page 86: Inside The Printer
Clearing Paper Jams If the Paper and the Error lights Note: do not turn off, there is still jammed paper inside the printer. Check the inside of the printer. Inside the Printer Paper jams in this area may result in loose toner on the page. If you get any toner on Note: your clothes, wash them in cold water because hot water will set the toner into the fabric.
-
Page 87
To prevent damage to CAUTION: the toner cartridge, do not expose it to light for more than a few minutes. Place a piece of paper over the top of the toner cartridge to shield it while it is out of the printer. Clearing Paper Jams ROBLEM OLVING… -
Page 88: Tips For Avoiding Paper Jams
Clearing Paper Jams Tips for Avoiding Paper Jams 7.10 ROBLEM OLVING…
-
Page 89: Solving Print Quality Problems
Solving Print Quality Problems Print Quality Checklist Solving Print Quality Problems Light or faded print AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc 7.11 ROBLEM OLVING…
-
Page 90
Solving Print Quality Problems Toner specks AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Dropouts AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Vertical lines AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc 7.12 ROBLEM OLVING AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc… -
Page 91
AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Gray background AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Toner smear AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Vertical repetitive defects AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Solving Print Quality Problems AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc ROBLEM 7.13… -
Page 92
Solving Print Quality Problems AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Background scatter AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Misformed characters Page skew 7.14 ROBLEM OLVING AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc… -
Page 93
AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Curl or wave AaBbCc AaBbCc AaBbCc Wrinkles or creases Back of printouts dirty Black pages Solving Print Quality Problems AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc ROBLEM 7.15 OLVING… -
Page 94
Solving Print Quality Problems Loose toner AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Character Voids Horizontal stripes AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc 7.16 ROBLEM OLVING AaBbCc AaBbCc… -
Page 95: Troubleshooting Error Messages
Troubleshooting Error Messages Printer Light Patterns Error Paper Data Error Paper Data Error Paper Data 7.17 ROBLEM OLVING…
-
Page 96
Troubleshooting Error Messages Error Paper Data Error Paper Data Error Paper Data Toner Save Data Error Paper 7.18 ROBLEM OLVING… -
Page 97
Toner Save Data Error Paper Toner Save Data Error Paper Toner Save Data Error Paper Toner Save Data Error Paper Toner Save Data Error Paper Toner Save Data Error Paper Troubleshooting Error Messages ROBLEM OLVING 7.19… -
Page 98: Common Windows Problems
Common Windows Problems Refer to Microsoft Windows 9x or NT 4.0 documentation that came with your PC for Note: further information on Windows error messages. 7.20 ROBLEM OLVING…
-
Page 100: Printer Specifications
Printer Specifications PPENDIX…
-
Page 101: Paper Specifications
Always test paper before buying large quantities. Using paper that does not meet these CAUTION: specifications may cause problems for the printer, requiring repairs. This repair is not covered by the Samsung warranty or service agreements.
-
Page 102: Supported Sizes Of Paper
Paper Specifications Supported Sizes of Paper You may experience some paper jams when using any media with a length of less than Note: 127 mm (5 in.). For optimum performance, make sure you are storing and handling the paper correctly. Please refer to “Printer and Paper Storage Environment” on page A.6. PPENDIX…
-
Page 103: Guidelines For Using Paper
Paper Specifications Guidelines for Using Paper Notes: • Do not use letterhead paper that is printed with low-temperature inks, such as those used in some types of thermography. • Do not use raised or embossed letterhead. • The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0.1 second).
-
Page 104: Paper Output Capacity
Paper Specifications Paper Specifications Paper Output Capacity PPENDIX…
-
Page 105: Printer And Paper Storage Environment
Paper Specifications Printer and Paper Storage Environment PPENDIX…
-
Page 106
Paper Specifications Envelopes You may experience some paper jams when using any Note: media with a length of less than 127 mm (5 in.). This may be caused by paper that has been affected by environmental conditions. For optimum performance, make sure you are storing and handling the paper correctly. -
Page 107
Paper Specifications Envelopes with Double Side Seams Envelopes with Adhesive Strips or Flaps Envelope Margins Envelope Storage PPENDIX Notes: • For best print quality, position margins no closer than 15 mm (0.6 in.) from the edges of the envelope. • Avoid printing over the area where the envelope’s seams meet. -
Page 108
Labels Transparencies CAUTIONS: • To avoid damaging the printer, use only labels recommended for laser printers. • To prevent serious jams, always use the face-up output slot. • Never print on the same sheet of labels more than once or print on a partial sheet of labels. -
Page 109: Installing The Printer Software
Using Your Printer with a USB Cable Note: To connect the printer to the USB port of the computer requires a certified USB cable. You will need to buy the USB 1.0 compliant cable. And the length should be less than three meters. You must install the printer driver before you connect the USB cable in Windows 2000.
-
Page 110
Using Your Printer with a USB Cable A.11 PPENDIX… -
Page 111
Using Your Printer with a USB Cable A.12 PPENDIX… -
Page 112
Using Your Printer with a USB Cable 3. Set your PC printer port A.13 PPENDIX… -
Page 113
Using Your Printer with a USB Cable Frequently Asked Questions About USB A.14 PPENDIX… -
Page 114
Using Your Printer with a USB Cable A.15 PPENDIX… -
Page 115
Using Your Printer with Macintosh System Requirements Installing Software for Macintosh Connecting to Macintosh A.16 PPENDIX… -
Page 116
Note: Installing Software Using Your Printer with Macintosh If you are using a USB hub, connect the printer’s cable to the first tier of the hub or the printer may malfunction. If the printer doesn’t work with the hub, connect it directly to the USB port. -
Page 117: Printing From A Macintosh
Using Your Printer with Macintosh Choosing PCL Driver ML-1250 Printing from a Macintosh A.18 PPENDIX…
-
Page 118
Using Your Printer with Macintosh A.19 PPENDIX… -
Page 119
Using Your Printer with Macintosh A.20 PPENDIX… -
Page 120: Advanced Printing
Using Your Printer with Macintosh Advanced Printing Darkness/Quality Layout A.21 PPENDIX…
-
Page 121
Using Your Printer with Macintosh Color œ œ Background Printing Paper Source A.22 PPENDIX… -
Page 122: Printing From Dos Applications
DOS software programs. If your DOS software program does not include a printer driver for your Samsung printer, contact the manufacturer of the software program or use one of the alternate printer drivers. A.23…
-
Page 123: Selecting Print Settings
Printing from DOS Applications Installing the Remote Control Panel for DOS Users Selecting Print Settings A.24 PPENDIX After you change the RCP settings, you must send it to Note: the printer by pressing Send on the RCP screen.
-
Page 124
Printing from DOS Applications A.25 PPENDIX… -
Page 125
Printing from DOS Applications A.26 PPENDIX… -
Page 126
Printing from DOS Applications A.27 PPENDIX… -
Page 127: Linux Driver Installation
Linux Driver Installation Installation 1. Mount the CD-ROM drive. A.28 PPENDIX To mount the CD-ROM drive, you must be a super user Note: or must be authorized to mount the CD-ROM by the super user. If you fail to mount the CD-ROM drive, ask the system administrator.
-
Page 128
Linux Driver Installation 2. Install setup script. 3. Set up the printer filter. A.29 PPENDIX… -
Page 129
Installing Optional Memory Card Precautions Installation A.30 PPENDIX ML-1250 has 4 MB standard of the printer memory and Note: you can expand the memory up to 68 MB. -
Page 130
Installing Optional Memory Card A.31 PPENDIX… -
Page 131
Installing Optional Memory Card A.32 PPENDIX… -
Page 132
When you disassemble the Note: memory card, push out on the metal clips at each end of the connector, and pull it as shown. Installing Optional Memory Card PPENDIX A.33… -
Page 133
INDEX NDEX paper jam… -
Page 134
INDEX paper driver NDEX… -
Page 135
INDEX NDEX problem, solving… -
Page 136
Visit us at: Rev.1.00 http://www.samsungprinter.com Home…
- Manuals
- Brands
- Samsung Manuals
- Printer
- Lazett ML-1250
- User manual
-
Contents
-
Table of Contents
-
Troubleshooting
-
Bookmarks
Quick Links
Related Manuals for Samsung ML-1250
Summary of Contents for Samsung ML-1250
-
Page 3
Contents Introduction Setting Up Your Printer STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7 Using Control Panel Print Media… -
Page 4
Printing Tasks Maintaining Your Printer Problem Solving Appendix INDEX… -
Page 5: Laser Safety Statement
Environmental and Safety Consideration Laser Safety Statement WARNING Never operate or service the printer with the protective cover removed from Laser/Scanner assembly. The reflected beam, although invisible, can damage your eyes.
-
Page 6: Ozone Safety
Environmental and Safety Consideration Ozone Safety Power Saver…
-
Page 7: Radio Frequency Emissions
Environmental and Safety Consideration Radio Frequency Emissions Fcc Regulations CAUTION: Changes or modifications not expressly approved by the manufacture responsible for compliance could void the user’s authority to operate the equipment. Canadian Radio Interference Regulations…
-
Page 8
Environmental and Safety Consideration Declaration of Conformity (European Countries) Approvals and Certifications… -
Page 9
chapter… -
Page 10: Special Features
Special Features Print with excellent quality and high speed Flexible paper handling Save your time and money NTRODUCTION…
-
Page 11
Special Features Create professional documents Dear ABC Regards WORLD BEST Expand the printer capacity Print in various environments NTRODUCTION… -
Page 12: Printer Components
Printer Components Front View NTRODUCTION…
-
Page 13: Inside View
Printer Components Inside View Rear View NTRODUCTION…
-
Page 14
chapter STEP 1 STEP 2 STEP 3 STEP 4 STEP 5 STEP 6 STEP 7… -
Page 15: Unpack Your Printer
Unpack Your Printer Notes: • If any items are missing or damaged, notify your dealer immediately. • Components may differ from one country to another. * contains the printer driver, the User’s Guide, the Adobe Acrobat Reader program, and the Make Your Own Diskette setup software.
-
Page 16: Install The Toner Cartridge
Install the Toner Cartridge CAUTION: To prevent damage, do not expose the toner cartridge to light for more than a few minutes. Cover it with a piece of paper, if left exposed for more than a few If toner gets on your clothing, wipe it off with a dry cloth and wash clothing in cold water.
-
Page 17
Install the Toner Cartridge When printing text at 5% coverage, you can expect a toner cartridge life of approximately 2,500 pages (1,000 pages for the toner cartridge that is shipped with the printer). ETTING RINTER… -
Page 18: Load Paper
Load Paper ETTING RINTER…
-
Page 19
Notes: • Do not push the width guide far enough to cause the media to warp. • If you do not adjust the width guide, it may cause paper jam. • If you are needed to add more sheets of paper while printing, remove the remaining paper from the tray at first. -
Page 20: Connect To The Computer
Connect to the Computer with a Parallel Cable Note: To connect the printer to the parallel port of the computer ETTING RINTER requires a certified parallel cable. You will need to buy the IEEE1284 compliant cable.
-
Page 21: Turn On The Printer
Turn on the Printer Print a Demo Page! Demo ML-1250 Laser Beam Printer Excellent Performance, High Quality Cost Saving, Convenience Compatibility ETTING RINTER…
-
Page 22: Install The Printer Software
Install the Printer Software Before Installing the Printer Software ETTING RINTER…
-
Page 23: Installing The Printer Software From The Cd-Rom
Installing the Printer Software from the CD-ROM Note: If the New Hardware Found box appears during the installation procedure, click the x in the upper right corner of the box, or click Cancel. Install the Printer Software ETTING RINTER…
-
Page 24
Install the Printer Software 2.10 ETTING RINTER… -
Page 25: Software Installation Tips
Install the Printer Software Software Installation Tips 2.11 ETTING RINTER…
-
Page 26
Install the Printer Software 2.12 ETTING RINTER… -
Page 27: Installing Software From Diskette
Installing Software from Diskette Making Installation Diskettes 2.13 ETTING RINTER…
-
Page 28
Installing Software from Diskette 2.14 ETTING RINTER… -
Page 29: Installing Software
Installing Software from Diskette Installing Software 2.15 ETTING RINTER…
-
Page 30
chapter… -
Page 31: Control Panel Buttons
Control Panel Buttons Toner Save Cancel/Reprint Demo Print demo page Demo Demo Start manual feeding Manual Feeder Paper Source Demo Clean the inside of the printer Demo SING ONTROL ANEL…
-
Page 32
Control Panel Buttons Cancel/Reprint Toner Save Toner Save SING ONTROL ANEL Cancel job Cancel/Reprint Error If the Cancel/Reprint button is accidentally Note: pushed, the job must be reprinted. There is no undo function. Reprint last page of the job Cancel/Reprint Turn the Toner Save Mode on/off Toner Save Toner Save Mode… -
Page 33: Control Panel Lights
Control Panel Lights Control Panel Light Message Error Paper Data Data Error Paper Data Cancel/Reprint Error Paper Data Error Paper Data Demo Error Ready mode Demo Processing Paper out Demo Waiting for the Demo button to be pressed Demo SING ONTROL ANEL…
-
Page 34
chapter… -
Page 35: Choosing Paper And Other Media
Choosing Paper and Other Media Desired outcome Size Weight Brightness Surface smoothness CAUTION: specification listed in the paper specification can cause problems that may require service. This service is not covered by the warranty or service agreements. Using media that does not conform to the RINT EDIA…
-
Page 36: Media Sizes And Capacities
Choosing Paper and Other Media Media Sizes and Capacities Input Source/Capacity* Media Size Manual Input Tray Automatic Input Tray Plain Paper Envelopes Labels Transparency film Card stock Bond Paper Thin Paper Thick Paper RINT EDIA…
-
Page 37: Paper Guidelines
Choosing Paper and Other Media Paper Guidelines cause paper jams only Use only Do not Do not Do not Avoid Do not Do not Keep RINT EDIA…
-
Page 38: Selecting The Output Location
Selecting the Output Location face-up output slot face-down output tray printing to the face-up output slot do not change the position of the output lever Printing to the Face-Down Output Tray face-down in correct order Printing to the Face-Up Output Slot face-up RINT EDIA…
-
Page 39: Loading Paper
Loading Paper Using the Automatic Input Tray Using the Manual Input Tray To avoid a paper jam, use the manual tray with the automatic input tray loaded with Note: paper. with the print side up Do not Before using the automatic input tray, you must remove Note: paper from the manual input tray.
-
Page 40
Loading Paper Manual Feeder Source Demo Notes: • The face-up output slot may not hold the printed pages properly. • The printed pages will not stack in the face-down output tray unless you change output lever position. After you finish using the face-up output slot, you must change the position of the output lever to the normal position. -
Page 41: Printing On Envelopes
Printing on Envelopes Guidelines with the flap side down on the right side stamp area enters the tray first with the RINT EDIA…
-
Page 42
Printing on Envelopes RINT EDIA… -
Page 43: Printing On Heavy Paper
Printing on Heavy Paper Guidelines with print side up Bond RINT EDIA…
-
Page 44: Printing On Labels
Printing on Labels Guidelines with print side up To prevent them from sticking Note: together, do not let the printed label sheets stack up as they are printed out. 4.10 RINT EDIA…
-
Page 45: Printing On Transparencies
Printing on Transparencies Guidelines with the print side up the adhesive strip entering the printer first. Notes: • To prevent transparencies from sticking together, do not let the printed sheets stack up as they are printed out. • Place transparencies on a flat surface after removing them from the printer.
-
Page 46: Printing On Preprinted Paper
Printing on Preprinted Paper Guidelines with the design face up, and the bottom edge toward the printer 4.12 RINT EDIA…
-
Page 47
Printing on Card Stock or Custom-sized Media Guidelines with the print side up and the short edge first If the size of your print media is not Note: listed in the Paper Size box in the Paper tab of the printer driver properties, select Custom Size and set the paper size manually. -
Page 48
chapter… -
Page 49: Printing A Document
Printing a Document RINTING ASKS…
-
Page 50
Printing a Document RINTING ASKS… -
Page 51
Printing a Document œ œ œ œ œ œ œ œ RINTING ASKS… -
Page 52
1. Click the Windows Start button. 2. Select Settings, and then Printers to open the Printers window. 3. Select the Samsung ML-1250 PCL 6 printer icon. 4. Click the right mouse button and select Properties to open the properties window. -
Page 53: Canceling A Print Job
Printing a Document Canceling a Print Job Using Help RINTING ASKS…
-
Page 54: Using Toner Save Mode
Using Toner Save Mode To enable or disable the Toner Save mode from the Note: control panel, the Toner Save Mode option in the printer driver must be set to Printer Setting. See below. RINTING ASKS…
-
Page 55
rinting Multiple Pages on One Sheet of Paper œ¤ œ¤ œ¤ œ¤ (N-Up Printing) RINTING ASKS… -
Page 56: Fitting Your Document To A Selected Paper Size
Fitting Your Document To a Selected Paper Size RINTING ASKS…
-
Page 57: Printing Posters
Printing Posters œ œ œ œ RINTING ASKS…
-
Page 58
Printing Posters ➛ ➛ ¤ ¤ ¤ ¤ ➛ ➛ ¤ ¤ ¤ ¤ ➛ ➛ ¤ ¤ ¤ ¤ ➛ ➛ ¤ ¤ ¤ ¤ œ œ ¤ ¤ ¤ ¤ œ œ ¤ ¤ ¤ ¤ œ œ ¤ ¤ ¤ ¤ œ… -
Page 59: Setting Graphic Properties
Setting Graphic Properties 5.11 RINTING ASKS…
-
Page 60
Setting Graphic Properties Resolution SRT Mode When 600 dpi is selected in the Resolution section, Note: selecting Text Enhance or Image Enhance gives you an image quality of 1200 dpi class . 5.12 RINTING ASKS… -
Page 61
Graphic Mode Halftoning What is Halftone? Gray-scale objects (such as photographs) whose gray dots have been converted to a pattern of groups of black dots. These groups, which are of various sizes, along with the white dots (pixels turned off), create illusions of gray shading: larger groups make the image appear black or dark gray, while… -
Page 62: Printing Watermarks
Printing Watermarks To use an existing watermark 5.14 RINTING ASKS…
-
Page 63
Printing Watermarks To create or edit a watermark 5.15 RINTING ASKS… -
Page 64
Printing Watermarks To delete a watermark 5.16 RINTING ASKS… -
Page 65: Using Page Overlay
Using Page Overlay What is an Overlay? Dear ABC Regards WORLD BEST Creating a New Page Overlay WORLD BEST 5.17 RINTING ASKS…
-
Page 66
Using Page Overlay Using Page Overlay 5.18 RINTING ASKS The overlay document size must be the same as Note: documents you will print with the overlay. -
Page 67
Using Page Overlay 5.19 RINTING ASKS… -
Page 68
Using Page Overlay Deleting a Page Overlay 5.20 RINTING ASKS… -
Page 69: Reprinting The Last Page
To disable this feature: 1. From the Start menu, select Settings and then Printers. 2. Click the right mouse button on the Samsung ML-1250 PCL 6 printer icon and select Properties to open the properties window.
-
Page 70: Printing On A Network Environment
Printing on a Network Environment Setting Up Host Computer 5.22 RINTING ASKS You need to install the Samsung ML-1250 printer driver Note: on each computer that will print documents to the printer.
-
Page 71
Printing on a Network Environment Setting Up Client PC 5.23 RINTING ASKS… -
Page 72
chapter… -
Page 73: Maintaining Toner Cartridge
Maintaining Toner Cartridge Toner cartridge storage The printer warranty does not cover damage caused by using a refilled cartridge. Toner cartridge life expectancy Recycling toner cartridge Saving toner Toner Save Toner Save Mode AINTAINING RINTER…
-
Page 74: Redistributing Toner
Maintaining Toner Cartridge Redistributing Toner CAUTIONS: • Avoid reaching too far into the printer. The fusing area may be hot. • To prevent damage to the toner cartridge, do not expose it to light for more than a few minutes. AINTAINING RINTER…
-
Page 75
If the toner gets on your Note: clothing, wipe it off with a dry cloth and wash clothing in cold water. Hot water sets toner into fabric. If the print remains light Maintaining Toner Cartridge AINTAINING RINTER… -
Page 76: Cleaning The Printer
Cleaning the Printer Notes: • Do not use ammonia-based cleaners or volatile solvents such as thinner, on or around the printer. These can damage the printer. • While cleaning the inside of the printer, be careful not to touch the transfer roller (located underneath the toner cartridge ).
-
Page 77
Printing a cleaning sheet The cartridge Note: cleaning process takes some time. To stop the printing, turn the power off. Demo Cleaning the Printer AINTAINING RINTER… -
Page 78
chapter… -
Page 79: Troubleshooting Checklist
Troubleshooting Checklist ROBLEM OLVING…
-
Page 80: Solving General Printing Problems
Solving General Printing Problems ROBLEM OLVING…
-
Page 81
Solving General Printing Problems ROBLEM OLVING… -
Page 82
Solving General Printing Problems ROBLEM OLVING… -
Page 83
Solving General Printing Problems ROBLEM OLVING… -
Page 84: Clearing Paper Jams
Clearing Paper Jams Output Area Paper jams in this area may result in loose toner on the page. If you get any toner on your Note: clothes, wash them in cold water because hot water will set the toner into the fabric. ROBLEM OLVING…
-
Page 85
Input Area If paper has entered the toner cartridge area, follow the instructions on page 7.8. It is Note: easier to remove such jams from the inside of the printer than the paper input area. Clearing Paper Jams ROBLEM OLVING… -
Page 86: Inside The Printer
Clearing Paper Jams If the Paper and the Error lights Note: do not turn off, there is still jammed paper inside the printer. Check the inside of the printer. Inside the Printer Paper jams in this area may result in loose toner on the page. If you get any toner on Note: your clothes, wash them in cold water because hot water will set the toner into the fabric.
-
Page 87
To prevent damage to CAUTION: the toner cartridge, do not expose it to light for more than a few minutes. Place a piece of paper over the top of the toner cartridge to shield it while it is out of the printer. Clearing Paper Jams ROBLEM OLVING… -
Page 88: Tips For Avoiding Paper Jams
Clearing Paper Jams Tips for Avoiding Paper Jams 7.10 ROBLEM OLVING…
-
Page 89: Solving Print Quality Problems
Solving Print Quality Problems Print Quality Checklist Solving Print Quality Problems Light or faded print AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc 7.11 ROBLEM OLVING…
-
Page 90
Solving Print Quality Problems Toner specks AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Dropouts AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Vertical lines AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc 7.12 ROBLEM OLVING AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc… -
Page 91
AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Gray background AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Toner smear AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Vertical repetitive defects AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Solving Print Quality Problems AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc ROBLEM 7.13… -
Page 92
Solving Print Quality Problems AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Background scatter AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Misformed characters Page skew 7.14 ROBLEM OLVING AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc… -
Page 93
AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Curl or wave AaBbCc AaBbCc AaBbCc Wrinkles or creases Back of printouts dirty Black pages Solving Print Quality Problems AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc ROBLEM 7.15 OLVING… -
Page 94
Solving Print Quality Problems Loose toner AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc Character Voids Horizontal stripes AaBbCc AaBbCc AaBbCc AaBbCc AaBbCc 7.16 ROBLEM OLVING AaBbCc AaBbCc… -
Page 95: Troubleshooting Error Messages
Troubleshooting Error Messages Printer Light Patterns Error Paper Data Error Paper Data Error Paper Data 7.17 ROBLEM OLVING…
-
Page 96
Troubleshooting Error Messages Error Paper Data Error Paper Data Error Paper Data Toner Save Data Error Paper 7.18 ROBLEM OLVING… -
Page 97
Toner Save Data Error Paper Toner Save Data Error Paper Toner Save Data Error Paper Toner Save Data Error Paper Toner Save Data Error Paper Toner Save Data Error Paper Troubleshooting Error Messages ROBLEM OLVING 7.19… -
Page 98: Common Windows Problems
Common Windows Problems Refer to Microsoft Windows 9x or NT 4.0 documentation that came with your PC for Note: further information on Windows error messages. 7.20 ROBLEM OLVING…
-
Page 100: Printer Specifications
Printer Specifications PPENDIX…
-
Page 101: Paper Specifications
Always test paper before buying large quantities. Using paper that does not meet these CAUTION: specifications may cause problems for the printer, requiring repairs. This repair is not covered by the Samsung warranty or service agreements.
-
Page 102: Supported Sizes Of Paper
Paper Specifications Supported Sizes of Paper You may experience some paper jams when using any media with a length of less than Note: 127 mm (5 in.). For optimum performance, make sure you are storing and handling the paper correctly. Please refer to “Printer and Paper Storage Environment” on page A.6. PPENDIX…
-
Page 103: Guidelines For Using Paper
Paper Specifications Guidelines for Using Paper Notes: • Do not use letterhead paper that is printed with low-temperature inks, such as those used in some types of thermography. • Do not use raised or embossed letterhead. • The printer uses heat and pressure to fuse toner to the paper. Make sure that any colored paper or preprinted forms use inks that are compatible with this fusing temperature (200 °C or 392 °F for 0.1 second).
-
Page 104: Paper Output Capacity
Paper Specifications Paper Specifications Paper Output Capacity PPENDIX…
-
Page 105: Printer And Paper Storage Environment
Paper Specifications Printer and Paper Storage Environment PPENDIX…
-
Page 106
Paper Specifications Envelopes You may experience some paper jams when using any Note: media with a length of less than 127 mm (5 in.). This may be caused by paper that has been affected by environmental conditions. For optimum performance, make sure you are storing and handling the paper correctly. -
Page 107
Paper Specifications Envelopes with Double Side Seams Envelopes with Adhesive Strips or Flaps Envelope Margins Envelope Storage PPENDIX Notes: • For best print quality, position margins no closer than 15 mm (0.6 in.) from the edges of the envelope. • Avoid printing over the area where the envelope’s seams meet. -
Page 108
Labels Transparencies CAUTIONS: • To avoid damaging the printer, use only labels recommended for laser printers. • To prevent serious jams, always use the face-up output slot. • Never print on the same sheet of labels more than once or print on a partial sheet of labels. -
Page 109: Installing The Printer Software
Using Your Printer with a USB Cable Note: To connect the printer to the USB port of the computer requires a certified USB cable. You will need to buy the USB 1.0 compliant cable. And the length should be less than three meters. You must install the printer driver before you connect the USB cable in Windows 2000.
-
Page 110
Using Your Printer with a USB Cable A.11 PPENDIX… -
Page 111
Using Your Printer with a USB Cable A.12 PPENDIX… -
Page 112
Using Your Printer with a USB Cable 3. Set your PC printer port A.13 PPENDIX… -
Page 113
Using Your Printer with a USB Cable Frequently Asked Questions About USB A.14 PPENDIX… -
Page 114
Using Your Printer with a USB Cable A.15 PPENDIX… -
Page 115
Using Your Printer with Macintosh System Requirements Installing Software for Macintosh Connecting to Macintosh A.16 PPENDIX… -
Page 116
Note: Installing Software Using Your Printer with Macintosh If you are using a USB hub, connect the printer’s cable to the first tier of the hub or the printer may malfunction. If the printer doesn’t work with the hub, connect it directly to the USB port. -
Page 117: Printing From A Macintosh
Using Your Printer with Macintosh Choosing PCL Driver ML-1250 Printing from a Macintosh A.18 PPENDIX…
-
Page 118
Using Your Printer with Macintosh A.19 PPENDIX… -
Page 119
Using Your Printer with Macintosh A.20 PPENDIX… -
Page 120: Advanced Printing
Using Your Printer with Macintosh Advanced Printing Darkness/Quality Layout A.21 PPENDIX…
-
Page 121
Using Your Printer with Macintosh Color œ œ Background Printing Paper Source A.22 PPENDIX… -
Page 122: Printing From Dos Applications
DOS software programs. If your DOS software program does not include a printer driver for your Samsung printer, contact the manufacturer of the software program or use one of the alternate printer drivers. A.23…
-
Page 123: Selecting Print Settings
Printing from DOS Applications Installing the Remote Control Panel for DOS Users Selecting Print Settings A.24 PPENDIX After you change the RCP settings, you must send it to Note: the printer by pressing Send on the RCP screen.
-
Page 124
Printing from DOS Applications A.25 PPENDIX… -
Page 125
Printing from DOS Applications A.26 PPENDIX… -
Page 126
Printing from DOS Applications A.27 PPENDIX… -
Page 127: Linux Driver Installation
Linux Driver Installation Installation 1. Mount the CD-ROM drive. A.28 PPENDIX To mount the CD-ROM drive, you must be a super user Note: or must be authorized to mount the CD-ROM by the super user. If you fail to mount the CD-ROM drive, ask the system administrator.
-
Page 128
Linux Driver Installation 2. Install setup script. 3. Set up the printer filter. A.29 PPENDIX… -
Page 129
Installing Optional Memory Card Precautions Installation A.30 PPENDIX ML-1250 has 4 MB standard of the printer memory and Note: you can expand the memory up to 68 MB. -
Page 130
Installing Optional Memory Card A.31 PPENDIX… -
Page 131
Installing Optional Memory Card A.32 PPENDIX… -
Page 132
When you disassemble the Note: memory card, push out on the metal clips at each end of the connector, and pull it as shown. Installing Optional Memory Card PPENDIX A.33… -
Page 133
INDEX NDEX paper jam… -
Page 134
INDEX paper driver NDEX… -
Page 135
INDEX NDEX problem, solving… -
Page 136
Visit us at: Rev.1.00 http://www.samsungprinter.com Home…
Часто пользователь может столкнутся с тем, что принтер не хочет захватывать бумагу из лотка. Такое может случится с любым принтером, но у устройств производства Samsung есть свои особенности и пути исправления этой неисправности.
Причины того, что принтер не захватывает бумагу делятся на две категории: проблема с принтером и проблема с бумагой. На сайте производителя одной из причин значится отсутствие бумаги в лотке, что не относится ни к какой категории.
Причины и пути решения, по которым принтер Samsung не захватывает бумагу
1. В настройках принтера включен режим ручной (Manual) подачи бумаги, отключите его.
2. Неправильно выставлены направляющие бумаги. Для того, чтобы решить эту задачу, необходимо раздвинуть направляющие бумаги и обратно установить их, соответственно ширине бумаги в лотке.
3. Картридж принтера не до конца зафиксирован в «посадочные» пазы. Особенностью принтеров Samsung есть то, что иногда при установке картриджа, чип на нем прикасается до нужного разъема, а сами фиксаторы не доходят до защелки. При этом принтер не выдает ошибку о неправильно установленном картридже. Необходимо открыть принтер и переустановить картридж в нем.
4. Ролик захвата бумаги загрязнен, или, в некоторых случаях, даже поврежден. Лоток захвата видно, если вынуть картридж. Он зачастую серого цвета и находится посередине стального вала под картриджем. Белые полоски на нем говорят о его загрязнении так называемой «бумажной пылью». Для очистки есть возможность снять ролик захвата, раздвинув боковые пластиковые зажимы, однако вполне достаточно протереть вал в принтере. Но при этом стоит учесть, что принтер обязательно необходимо выключить и дать ему остыть. Протирать вал необходимо тканью без ворсинок, вымоченной в спирте, или в крайнем случае, в воде. Повреждение можно выявить визуально. Ролик при этом имеет явные неровности или потрескавшуюся, рваную поверхность.
5. В принтере инородное тело. Бывает, что в принтер попадает скрепка, скоба, листок от рядом стоящего цветка, или клочок бумаги. В любом случае, инородный предмет можно извлечь пылесосом, или перевернув принтер. Принтер должен быть без картриджа!
Причины в бумаге. Рекомендации по выбору бумаги для принтера.
1. Чаще всего, когда принтер Samsung не захватывает бумагу, причина скрывается в качестве самой бумаги. Даже хорошая бумага, при неправильном ее хранении, может создать Вам проблемы, которые могут даже повлечь поломку принтера. Зачастую бумага просто отсыревает.
2. Следующая причина – бумага, только что вытащена с пачки и листы плотно прилегают друг к другу. Чтобы исправить это, достаточно достать бумагу с лотка согнуть ее в обе стороны.
3. Бумага может лежать в лотке неровно. Необходимо вытащить всю бумагу с лотка и выровнять ее. После вставки прижать стопку направляющими, но не плотно. У бумаги могут быть замятия, выявить которые можно визуально, достав бумагу.
4. Отдельный вопрос, если бумага не качественная, или имеет несоответствующую плотность. Оптимально бумага должна иметь плотность 80 г. на кв. м. Допускается плотность от 75 г. до 120 г. на кв. м. Если принтер не имеет функции печати на глянцевой бумаге, то не стоит ее класть в лоток.
Причин, из-за которых лазерный принтер не захватывает бумагу, может быть больше, но перечисленные причины – основные. Если Вы не смогли выявить ее, или не компетентны в ремонте принтера, то рекомендуется обратиться в сервисный центр.
⚡️ Присоединяйтесь к нашему каналу в Telegram. Будьте в курсе последних новостей, советов и хитростей для смартфонов и компьютеров.
Эта запись была полезной?
Лазерный принтер Samsung ML-1250 — Не печатает, ошибка
Не печатает. Когда принтер пытается потянуть первый лист бумаги — выбивает ошибку, поочередно мигают красный и зеленый, потом оранжевый индикаторы.
При печати тестовой страницы та сама проблема.
Подскажите пожалуйста решение даной проблемы
- Cracker
Авас » 13:47 — 04.07.06
Попробуй посмотреть лампу накаливания в печке, может быть неконтакт, а может за ней смерть пришла!
- Авас
GVG » 14:25 — 04.07.06
- GVG
- Консультант
- Сообщения: 459
- Зарегистрирован: 20:22 — 09.12.05
- Откуда: Украина
- Баллы репутации: 0
-
- ICQ
Вернуться в SAMSUNG
Кто сейчас на конференции
Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 0