Unicode escape python ошибка

I am using Python 3.1 on a Windows 7 machine. Russian is the default system language, and utf-8 is the default encoding.

Looking at the answer to a previous question, I have attempting using the «codecs» module to give me a little luck. Here’s a few examples:

>>> g = codecs.open("C:UsersEricDesktopbeeline.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 2-4: truncated UXXXXXXXX escape (<pyshell#39>, line 1)

>>> g = codecs.open("C:UsersEricDesktopSite.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 2-4: truncated UXXXXXXXX escape (<pyshell#40>, line 1)

>>> g = codecs.open("C:Python31Notes.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 11-12: malformed N character escape (<pyshell#41>, line 1)

>>> g = codecs.open("C:UsersEricDesktopSite.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 2-4: truncated UXXXXXXXX escape (<pyshell#44>, line 1)

My last idea was, I thought it might have been the fact that Windows «translates» a few folders, such as the «users» folder, into Russian (though typing «users» is still the correct path), so I tried it in the Python31 folder. Still, no luck. Any ideas?

Python SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 2-3: truncated UXXXXXXXX escape

In this post, you can find several solutions for:

SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 2-3: truncated UXXXXXXXX escape

While this error can appear in different situations the reason for the error is one and the same:

• there are special characters( escape sequence — characters starting with backslash — » ).
• From the error above you can recognize that the culprit is ‘U’ — which is considered as unicode character.
  • another possible errors for SyntaxError: (unicode error) ‘unicodeescape’ will be raised for ‘x’, ‘u’
    • codec can’t decode bytes in position 2-3: truncated xXX escape
    • codec can’t decode bytes in position 2-3: truncated uXXXX escape

Step #1: How to solve SyntaxError: (unicode error) ‘unicodeescape’ — Double slashes for escape characters

Let’s start with one of the most frequent examples — windows paths. In this case there is a bad character sequence in the string:

The problem is that U is considered as a special escape sequence for Python string. In order to resolved you need to add second escape character like:

Step #2: Use raw strings to prevent SyntaxError: (unicode error) ‘unicodeescape’

If the first option is not good enough or working then raw strings are the next option. Simply by adding r (for raw string literals) to resolve the error. This is an example of raw strings:

If you like to find more information about Python strings, literals

In the same link we can find:

When an r’ or R’ prefix is present, backslashes are still used to quote the following character, but all backslashes are left in the string. For example, the string literal r»n» consists of two characters: a backslash and a lowercase `n’.

Step #3: Slashes for file paths -SyntaxError: (unicode error) ‘unicodeescape’

Another possible solution is to replace the backslash with slash for paths of files and folders. For example:

will be changed to:

Since python can recognize both I prefer to use only the second way in order to avoid such nasty traps. Another reason for using slashes is your code to be uniform and homogeneous.

Step #4: PyCharm — SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 2-3: truncated UXXXXXXXX escape

The picture below demonstrates how the error will look like in PyCharm. In order to understand what happens you will need to investigate the error log.

The error log will have information for the program flow as:

You can see the latest call which produces the error and click on it. Once the reason is identified then you can test what could solve the problem.

Источник

Python unicode error unicodeescape codec

Reading time В· 2 min

SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 2-3: truncated UXXXXXXXX escape #

The Python «SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position» occurs when we have an unescaped backslash character in a path. To solve the error, prefix the path with r to mark it as a raw string, e.g. r’C:UsersBobDesktopexample.txt’ .

Here is an example of how the error occurs.

The path contains backslash characters which is the cause of the error.

The backslash character has a special meaning in Python — it is used as an escape character (e.g. n or t ).

One way to solve the error is to prefix the string with the letter r to mark it as a raw string.

An alternative way to treat a backslash as a literal character is to escape it with a second backslash \ .

We escaped each backslash character to treat them as literal backslashes.

Here is a string that shows how 2 backslashes only get translated into 1.

Similarly, if you need to have 2 backslashes next to one another, you would have to use 4 backslashes.

An alternative solution to the «unicodeescape codec can’t decode bytes in position» error is to use forward slashes in the path instead of backslashes.

A forward slash can be used in place of a backslash when you need to specify a path.

This solves the error because we no longer have any unescaped backslash characters in the path.

Since backslash characters have a special meaning in Python, we need to treat them as a literal character by:

• prefixing the string with r to mark it as a raw string
• escaping each backslash with a second backslash
• using forward slashes in place of backslashes in the path

Источник

SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 2-3: truncated UXXXXXXXX escape

Table of Contents Hide

The SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 2-3: truncated UXXXXXXXX escape occurs if you are trying to access a file path with a regular string.

In this tutorial, we will take a look at what exactly (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 2-3: truncated UXXXXXXXX escape means and how to fix it with examples.

What is SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 2-3: truncated UXXXXXXXX escape?

The Python String literals can be enclosed in matching single quotes (‘) or double quotes (“).

String literals can also be prefixed with a letter ‘r‘ or ‘R‘; such strings are called raw strings and use different rules for backslash escape sequences.

They can also be enclosed in matching groups of three single or double quotes (these are generally referred to as triple-quoted strings).

The backslash () character is used to escape characters that otherwise have a special meaning, such as newline, backslash itself, or the quote character.

Now that we have understood the string literals. Let us take an example to demonstrate the issue.

Output

We are using the single backslash in the above code while providing the file path. Since the backslash is present in the file path, it is interpreted as a special character or escape character (any sequence starting with ‘’). In particular, “U” introduces a 32-bit Unicode character.

How to fix SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 2-3: truncated UXXXXXXXX escape?

Solution 1 – Using Double backslash (\)

In Python, the single backslash in the string is interpreted as a special character, and the character U(in users) will be treated as the Unicode code point.

We can fix the issue by escaping the backslash, and we can do that by adding an additional backslash, as shown below.

Solution 2 – Using raw string by prefixing ‘r’

We can also escape the Unicode by prefixing r in front of the string. The r stands for “raw” and indicates that backslashes need to be escaped, and they should be treated as a regular backslash.

Solution 3 – Using forward slash

Another easier way is to avoid the backslash and instead replace it with the forward-slash character(/), as shown below.

Conclusion

The SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 2-3: truncated UXXXXXXXX escape occurs if you are trying to access a file path and provide the path as a regular string.

We can solve the issue by escaping the single backslash with a double backslash or prefixing the string with ‘r,’ which converts it into a raw string. Alternatively, we can replace the backslash with a forward slash.

Источник

[Solved] Python SyntaxError: (unicode error) ‘unicodeescape’ codec can’t decode bytes in position 0-5: truncated UXXXXXXXX escape

Introduction

The following error message is a common Python error, the «SyntaxError» represents a Python syntax error and the «unicodeescape» means that we made a mistake in using unicode escape character.

Simply to put, the «SyntaxError» can be occurred accidentally in Python and it is often happens because the (ESCAPE CHARACTER) is misused in a python string, it caused the unicodeescape error.

(Note: «escape character» can convert your other character to be a normal character.)

SyntaxError Example

Let’s look at an example:

Looks like we want to print «It’s a nice day.«, right? But the program will report an error message.

The reason is very easy-to-know. In Python, we can use print(‘xxx’) to print out xxx. But in our code, if we had used the ‘ character, the Python interpreter will misinterpret the range of our characters so it will report an error.

To solve this problem, we need to add an escape character «» to convert our ‘ character to be a normal character, not a superscript of string.

We print it successfully!

So how did the syntax error happen? Let me talk about my example:

One day, I run my program for experiment, I saved some data in a csv file. In order for this file can be viewed on the Windows OS, I add a new code uFFEF in the beginning of file.

This is «BOM» (Byte Order Mark), Explain to the system that the file format is «Big-Ending«.

I got the error message.

As mentioned at the beginning of this article, this is an escape character error in Python.

Solutions

There are three solutions you can try:

• Add a «r» character in the right of string
• Change to be /
• Change to be \

Solution 1: Add a «r» character in the beginning of string.

After we adding a r character at right side of python string, it means a complete string not anything else.

Solution 2: Change to be / .

This way is avoid to use escape character.

Solution 3: Change to be \ .

Change the code to:

It is similar to the solution 2 that it also avoids the use of escape characters.

The above are three common solutions. We can run normally on Windows.

Источник

(unicode error) ‘unicodeescape’ codec can’t decode bytes — string with ‘u’

Writing my code for Python 2.6, but with Python 3 in mind, I thought it was a good idea to put

at the top of some modules. In other words, I am asking for troubles (to avoid them in the future), but I might be missing some important knowledge here. I want to be able to pass a string representing a filepath and instantiate an object as simple as

In Python 2.6, this works just fine, no need to use double backslashes or a raw string, even for a directory starting with ‘u..’ , which is exactly what I want. In the __init__ method I make sure all single occurences are interpreted as ‘ \ ‘, including those before special characters as in a , b , f , n , r , t and v (only x remains a problem). Also decoding the given string into unicode using (local) encoding works as expected.

Preparing for Python 3.x, simulating my actual problem in an editor (starting with a clean console in Python 2.6), the following happens:

(OK until here: ‘u’ is encoded by the console using the local encoding)

In other words, the (unicode) string is not interpreted as unicode at all, nor does it get decoded automatically with the local encoding. Even so for a raw string:

Also, I would expect isinstance(str(»), unicode) to return True (which it does not), because importing unicode_literals should make all string-types unicode. (edit:) Because in Python 3, all strings are sequences of Unicode characters, I would expect str(»)) to return such a unicode-string, and type(str(»)) to be both , and (because all strings are unicode) but also realise that is not . Confusion all around.

• how can I best pass strings containing ‘ u ‘? (without writing ‘ \u ‘)
• does from __future__ import unicode_literals really implement all Python 3. related unicode changes so that I get a complete Python 3 string environment?

edit: In Python 3, is a Unicode object and simply does not exist. In my case I want to write code for Python 2(.6) that will work in Python 3. But when I import unicode_literals , I cannot check if a string is of because:

• I assume unicode is not part of the namespace
• if unicode is part of the namespace, a literal of is still unicode when it is created in the same module
• type(mystring) will always return for unicode literals in Python 3

My modules use to be encoded in ‘utf-8’ by a # coding: UTF-8 comment at the top, while my locale.getdefaultlocale()[1] returns ‘cp1252’. So if I call MyObject(‘çça’) from my console, it is encoded as ‘cp1252’ in Python 2, and in ‘utf-8’ when calling MyObject(‘çça’) from the module. In Python 3, it will not be encoded, but a unicode literal.

I gave up hope about being allowed to avoid using ‘’ before a u (or x for that matter). Also I understand the limitations of importing unicode_literals . However, the many possible combinations of passing a string from a module to the console and vica versa with each different encoding, and on top of that importing unicode_literals or not and Python 2 vs Python 3, made me want to create an overview by actual testing. Hence the table below.

In other words, type(str(»)) does not return in Python 3, but , and all of Python 2 problems seem to be avoided.

Источник

Sign Up for Our Newsletters

Subscribe to get notified of the latest articles. We will never spam you. Be a part of our ever-growing community.

By checking this box, you confirm that you have read and are agreeing to our terms of use regarding the storage of the data submitted through this form.

I am using Python 3.1 on a Windows 7 machine. Russian is the default system language, and utf-8 is the default encoding.

Looking at the answer to a previous question, I have attempting using the «codecs» module to give me a little luck. Here’s a few examples:

>>> g = codecs.open("C:UsersEricDesktopbeeline.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 2-4: truncated UXXXXXXXX escape (<pyshell#39>, line 1)

>>> g = codecs.open("C:UsersEricDesktopSite.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 2-4: truncated UXXXXXXXX escape (<pyshell#40>, line 1)

>>> g = codecs.open("C:Python31Notes.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 11-12: malformed N character escape (<pyshell#41>, line 1)

>>> g = codecs.open("C:UsersEricDesktopSite.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 2-4: truncated UXXXXXXXX escape (<pyshell#44>, line 1)

My last idea was, I thought it might have been the fact that Windows «translates» a few folders, such as the «users» folder, into Russian (though typing «users» is still the correct path), so I tried it in the Python31 folder. Still, no luck. Any ideas?

I am using Python 3.1 on a Windows 7 machine. Russian is the default system language, and utf-8 is the default encoding.

Looking at the answer to a previous question, I have attempting using the «codecs» module to give me a little luck. Here’s a few examples:

>>> g = codecs.open("C:UsersEricDesktopbeeline.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 2-4: truncated UXXXXXXXX escape (<pyshell#39>, line 1)

>>> g = codecs.open("C:UsersEricDesktopSite.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 2-4: truncated UXXXXXXXX escape (<pyshell#40>, line 1)

>>> g = codecs.open("C:Python31Notes.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 11-12: malformed N character escape (<pyshell#41>, line 1)

>>> g = codecs.open("C:UsersEricDesktopSite.txt", "r", encoding="utf-8")
SyntaxError: (unicode error) 'unicodeescape' codec can't decode bytes in position 2-4: truncated UXXXXXXXX escape (<pyshell#44>, line 1)

My last idea was, I thought it might have been the fact that Windows «translates» a few folders, such as the «users» folder, into Russian (though typing «users» is still the correct path), so I tried it in the Python31 folder. Still, no luck. Any ideas?