Sharp 20c20 ошибка f2 64

Вернуться в Принтеры, МФУ, копиры формата A3

Кто сейчас на форуме

Сейчас этот форум просматривают: нет зарегистрированных пользователей и гости: 20

При использовании любой техники время от времени могут возникать неполадки. Так, например, при использовании копиров, принтеров и МФУ Sharpмогут появляться различные ошибки, вызванные различными причинами. Об их возникновении пользователь информируется с помощью кода, которые выводится на дисплее принтера или другого используемого устройства. Коды ошибок Sharp вы можете идентифицировать с помощью приведенной ниже таблицы.  Выяснив причину сбоя в работе устройства, вы сможете устранить ее самостоятельно (например, если произошло замятие бумаги, отсутствует бумага в лотке) либо обратиться в сервисный центр по обслуживанию и ремонту Sharp, если код ошибки сообщает о серьезной поломке.

Sharp AL-840

Sharp AL-1000

Sharp AL-1010

Sharp AR-160 / 161

Sharp AR-163 / 201 / 206 / 5015 / 5020

Sharp AR-405

1. 08-09-2014

   
   

   #1

   

   
   Technician
   

   

   ---

   Rep Power

   19

   ---

2. 08-09-2014

   
   

   #2

   

   
   Senior Tech
   

   100+ Posts

   

   

   ---

   Rep Power

   22

   Re: F2-64
   

   First you didn’t mention the model and if it is colored or black and white. Usually this error occurred in compatible toner. You’ve replace the chip. Maybe the toner itself is died up. Try to rotate the gear and check if it is rotating properly. Check also the quantity of the developer in the DV unit.

   ---

3. 08-09-2014

   
   

   #3

   

   
   Technician
   

   

   ---

   Rep Power

   19

   Re: F2-64
   

   Originally Posted by Jhonjon
   

   First you didn’t mention the model and if it is colored or black and white. Usually this error occurred in compatible toner. You’ve replace the chip. Maybe the toner itself is died up. Try to rotate the gear and check if it is rotating properly. Check also the quantity of the developer in the DV unit.

   Sorry. My mistake. The model is 3500 N Sharp. The toner was working before properly. as per you said I have been checked the gears and i think one of them is loosen. If it can not rotate properly, may be it caused the damage and this error?

   ---

4. 08-09-2014

   
   

   #4

   

   
   Senior Tech
   

   250+ Posts

   

   

   

   ---

   Rep Power

   34

   Re: F2-64
   

   Maybe it is because of packed toner, shake toner. It could also be a toner motor. You can switch with another toner motor and see if the F2-64 error goes away. If it does replace the motor.

   ---

5. 08-10-2014

   
   

   #5

   

   
   Technician
   

   

   ---

   Rep Power

   19

   Re: F2-64
   

   Originally Posted by MHeon71
   

   Maybe it is because of packed toner, shake toner. It could also be a toner motor. You can switch with another toner motor and see if the F2-64 error goes away. If it does replace the motor.

   the problem now solved just because i have been cleaned the gears with cleaning oil spray and it could rotate softly and i could copy 50 pages after that. may be i have to do it more than once a month.
   thanks any way for your help

   ---

6. 08-11-2014

   
   

   #6

   

   
   Technician
   

   

   ---

   Rep Power

   19

   Re: F2-64
   

   Originally Posted by mahix
   

   the problem now solved just because i have been cleaned the gears with cleaning oil spray and it could rotate softly and i could copy 50 pages after that. may be i have to do it more than once a month.
   thanks any way for your help

   today the problem back and i saw one of the gears has been broken!!! what should i do now? why such a thing happend?

   ---

7. 08-11-2014

   
   

   #7

   

   
   Senior Tech
   

   100+ Posts

   

   

   ---

   Rep Power

   22

   Re: F2-64
   

   Originally Posted by mahix
   

   the problem now solved just because i have been cleaned the gears with cleaning oil spray and it could rotate softly and i could copy 50 pages after that. may be i have to do it more than once a month.
   thanks any way for your help

   You clean the gears of what? if it is from the toner unit it doesn’t help to resolve your problem, maybe the toner inside is dried up. The best way is to replace it. Maybe C,Y,M or K which is which?Before you replace it be sure to rotate the auger of the toner unit and make sure it is rotating smoothly.

   ---

8. 08-12-2014

   
   

   #8

   

   
   Technician
   

   

   ---

   Rep Power

   19

   Re: F2-64
   

   Originally Posted by Jhonjon
   

   You clean the gears of what? if it is from the toner unit it doesn’t help to resolve your problem, maybe the toner inside is dried up. The best way is to replace it. Maybe C,Y,M or K which is which?Before you replace it be sure to rotate the auger of the toner unit and make sure it is rotating smoothly.

   Sorry, I think you misunderstood. MY problem was from BK. Cartridge!!! the F2-64 from the manual is from toner supply abnormally (BLACK) and it has been explained that what we should do after this error. according to manual we should try SIM25-1..i have done what the manual said and as well as the SIM 25-2 and I have been try to clean and making the gears clean(you can check the gears at be back of the cartridge that they are rotating and moving while you care printing). that day machine was OK but yesterday after some copies and prints one the gears has been broken and the error occurred again. the toner is OK and i have been checked that. and I explained yesterday that one of the gears is broken now. now what should I do!!!!that is ALL!!!

   ---

9. 08-12-2014

   
   

   #9

   

   
   Senior Tech
   

   250+ Posts

   

   ---

   Rep Power

   30

   Re: F2-64
   

   Shake your new cartridge thoroughly before installing it, check the developer unit to make sure there is developer in it. If there is no developer change the black charge corona and add developer

   ---

10. 08-29-2014

    
    

    #10

    

    
    Junior Member
    

    

    

    ---

    Rep Power

    0

    Re: F2-64
    

    Don’t forget to clean the TD sensor as well, prior to replacing the developer. Then add the developer, then run your calibration. AS Jhonjon said, make sure it rotates — the dev/toner mix may have hardened up.

    ---