Password: https://www.pdfmanual4trucks.com/
|
Title |
File Size |
Download Links |
|
Jungheinrich EJC112 / E1202 Event Messages Codes List PDF |
619.4kb |
Download |
|
Jungheinrich Error Codes List PDF [PDF] |
199kb |
Download |
|
Jungheinrich Fault Codes [PDF] |
769kb |
Download |
|
Jungheinrich LISTADO ERRORES [PDF] |
199kb |
Download |
|
Jungheinrich System Error Codes list [PDF] |
162.7kb |
Download |

|
Display error code |
Cause |
Action |
|
1901 |
During system start-up, the accelerator pedal zero position could not |
Do not press the accelerator pedal during system start-up. |
|
1904 |
Accelerator pedal pressed, but no travel direction selected. |
Take your foot off the accelerator pedal, select a travel direction and set off. |
|
1909 |
Accelerator pedal pressed and parking brake not released via parking |
Release the parking brake by pressing the parking brake button. |
|
1917 |
Accelerator and brake pedals pressed simultaneously. |
Press one pedal at a time only. |
|
2951 |
Lift function activated on multi-/ solo PILOT during system start- up. |
Do not apply the multi-/ solo PILOT during system start- up.
–
–
– |
|
1952 |
Travel direction switch pressed during system start-up. |
Do not press the travel direction switch during system start-up |
|
9961 |
ISM (option) has detected a shock event in the vertical |
Obtain acknowledgement from authorized person (warehouse manager) and |
|
9962 |
ISM (option) has detected a shock event in the horizontal |
Obtain acknowledgement from authorized person (warehouse manager) and |
|
5990 |
The electrolyte level sensor check (battery-management option) on the |
Add electrolyte. |
|
5992 |
After switching on the truck, no radio network could be established |
–
–
–
– |
|
5408/ 5409 |
Lithium-ion battery overtemperature |
Stop work. |
|
5413 |
Lithium-ion battery low temperature |
Move truck to warm environment. |
For all other warning messages switch the truck off and on again. If the warning message appears again call the service department.
The code lock enables an operator or a group of operators to be assigned an individual user code. The user code is configured with a master code and is outlined in the following sections of this
chapter.
When you have entered the valid user code the truck will be operational. The truck will be able to perform travel, steering and hydraulic operations.
When you have entered the valid master code the truck will be switched on. Travel operations are inhibited. The truck will be able to perform steering and hydraulic operations. The code lock is
in programming mode. When you enter one of the following parameters the settings in the code lock can be changed.
|
Parameters |
Description |
|
0-0-0 |
– To change the master code |
|
0-0-1 |
– To add user codes |
|
0-0-2 |
– To change a user code |
|
0-0-3 |
– To clear a user code |
|
0-0-4 |
– To clear all user codes |
|
0-1-0 |
– To set the automatic cutout of the truck |
Newly supplied trucks have the code indicated on a sticker. When using the truck for the first time change the master and user codes and remove the sticker.
- User code factory setting: 2-5-8-0
- Master code factory setting: 7-2-9-5
Jungheinrich System Error Codes list.pdf
Adobe Acrobat Document
168.2 KB
Jungheinrich Fault Codes.pdf
Adobe Acrobat Document
720.8 KB
Jungheinrich Error Codes List PDF.pdf
Adobe Acrobat Document
191.8 KB
Jungheinrich EJC112 & E1202 Event Messag
Adobe Acrobat Document
582.8 KB
Event Messages
Z This display units shows a four-digit event message for every
event. Trucks that only use one luminous display (e.g. LED) show
the event through a flashing code (see «Display System”).
Each event message is also stored in the master logbook. The
master logbook describes the event in more detail through the sub
index behind the event message (FEXX).
Event numbering display
F E XX S
F Function group; E Event group
XX Event number S Sub index
The first two characters “F, E” refer to the category. The middle
two digits “XX” refer to the event. From these two digits the range:
• 1 to 50 describes standard events (uniform basic events)
which can occur in any function group.
• 51 to 99 describes specific events.
The event is described in further detail through the last characters
“S” (single digit / multi-digit).
This process ensures that a unique number is assigned to each
event. Example:
0 Fault reset or
no fault
1 General fault / additional functions
Example:
Logic error, e.g. both directions selected simultaneously
2 Current
(input interface, device-internal, output interface)
3 Voltage
(input interface, device-internal, output interface)
4 Temperature
5 Hardware
Example: Output transformer short circuit, EEPROM not
responding, …
6 Software
(internal software, application software, data record /
parameters)
Example: EEPROM data error
7 Additional modules
8 CAN monitoring
9 External fault
Example: ISM
Jungheinrich EFG 220 и другие модели этой серии оснащены трехфазным двигателем переменного тока, который представляет собой стандарт качества новой современной складской техники. Данный тип электродвигателя позволяет погрузчикам:
- экономить энергию. Энергия высвобождается за счет функции рекуперации. Оптимальный КПД обеспечивает хорошую работоспособность;
- сократить затраты на ТО;
- повысить производительность погрузчиков, которая достигается за счет трехфазового питания электродвигателя.

Электропогрузчик Jungheinrich EFG 220
Конструктивные особенности вилочных погрузчиков Jungheinrich EFG:
- Одного заряженного аккумулятора хватает на продолжительное количество времени работы, за счет этого складская логистика увеличивает рабочий цикл. Срок окупаемости снижается за счет сокращения расходов на топливо и техобслуживание. Аккумуляторные батареи заменяются так же быстро, как заправляется автомобиль на заправочной станции. Заменить батарею можно тремя способами в зависимости от загруженности склада и погрузчика. Вилочные электропогрузчики Jungheinrich с легкостью могут работать в несколько смены. Также к плюсам нужно отнести отличную современную и прочную конструкцию, сниженные до минимума затратчы. В создании моделей погрузчиков использовались новейшие технологии.
- Прочность конструкции обусловлена повышенной защитой освещения, прочными металлическими стенками и крышками
- Безопасность и устойчивость техники достигается за счет цельнометаллического корпуса и отсека под батарею.
- Все электропогрузчики Jungheinrich оснащены механизмами не требующими технического обслуживания.
- Погрузчики оснащены светодиодными модулями для подсветки работы, а также галогенными лампами для освещения (могут не устанавливаться по просьбе заказчика).
Основные характеристики

Вилочный погрузчик Jungheinrich EFG 220
- Телескопическая мачта, которой оснащены все электропогрузчики, может поднять груз на высоту до 6,5 м в зависимости от модели погрузчика. Также в зависимости от модели грузоподъемность варьируется от 1,3 тонн до 2 тонн включительно (Jungheinrich EFG 213 — 1,3 тонны, Jungheinrich EFG 220 — 2 тонны и т. д.).
- Повышенная маневренность достигается за счет электропривода рулевой колонки.
- Тормоз стоянки срабатывает автоматически, что также увеличивает комфорт в эксплуатации погрузчика.
- Электропогрузчик имеет пять индивидуальных программ работы, которые в свою очередь могут быть адаптированы под любого оператора и любую работу.
- Новшеством в управлении погрузчиком стали две системы: система SOLO и система MULTI-PILOT, которые вмонтированы в подлокотник кресла водителя.
- Рычаги управления вилочным электропогрузчиком находятся в удобном местоположении.
Преимущества электропогрузчиков серии EFG
Кабина оператора. Эргономичность и удобство

Jungheinrich EFG 220. Рабочее место оператора
В кресле оператора водитель электропогрузчика будет чувствовать себя комфортно и не устанет даже после долгой рабочей смены:
- Рулевой электропривод позволяет с легкостью управлять электропогрузчиком в любых условиях.
- Гидравлика полностью отсутствует в конструкции погрузчиков и позволяет установить более удобную кабину оператора. Оператор получает большую свободу для ног, плюс ко всему снижается уровень шума.
- Одним из нововведений, используемым в машиностроении, стало оснащение рулевой колонки, теперь ее можно регулировать по высоте и углу наклона.
- Рычаги управления, буквально все, встроены в подлокотник кресла оператора, подлокотник имеет степень регулировки по длине и высоте.
- Вибрационные процессы, идущие от основной оси, демпфируются (гасятся). В конструкции электропогрузчика использована так называемая «плавающая кабина».
Система энергоконтроля
- Рекуперативные функции погрузчика выполняются за счет трехфазного электродвигателя и тормозов. Это повышает показатель КПД погрузчика и увеличивает продолжительность работы до замены батареи.
- Заменить батарею можно с помощью тележки, штабелера или крана, при условии, что они производства Jungheinrich.
- Батарейный отсек расположен сбоку, что облегчает процесс подзарядки батареи.
- При техническом обслуживании облегчена доступность к механизмам.
- Установлено зарядное устройство с двумя классами мощности. Это позволяет ускорить процесс подзарядки аккумуляторной батареи.
Система торможения
Система тормозов погрузчика выполнена из износоустойчивых материалов и позволяет ровно и плавно тормозить:
- Тормоза на основной оси не требуют ТО.
- При остановке электропогрузчика используется торможение, осуществляемое при помощи педали акселератора.
- Находясь в наклонной плоскости, срабатывает система стояночного торможения.
- Диски в системе торможения не требуют ТО.
Двигатель электропогрузчика
Двигатели Jungheinrich могут использоваться в любых условия и при любой нагрузке. Работают исключительно с повышенной производительностью и пониженной шумоотдачей
- Даже на малых оборотах двигатель имеет высокий крутящий момент.
- Механизмы двигателя смазываются автоматически за счет специальной автоматической системы.
- Конструкция электропогрузчика оснащена двумя раздельными электродвигателями.
- Класс защиты всех компонентов конструкции электропогрузчика приравнен к IP 54.
Система безопасности
Электропогрузчики Jungheinrich серии EFG оснащены множеством элементов безопасной работы, это стало необходимым, так как вилочные электропогрузчики обладают повышенной мощностью и отличной маневренностью:
- Автоматическая система блокировки всех процессов, если оператор покинул кабину.
- Электропогрузчики оснащены системой автоматического торможения при наклонной плоскости и выключения двигателя.
- Jungheinrich Curve Control – система, обеспечивающая сокращение скорости движения при вхождении в поворот.
- Электронный дисплей в кабине оператора отображает скорость электропогрузчика, набранную при движении.

Jungheinrich EFG 220. Кабина оператора
Место оператора имеет несколько систем безопасности, в частности это:
- Система доступности управления погрузчиком Access Control. Система в порядке очереди проверяет: код доступа, нахождение оператора в кресле и пристегнут ли он ремнем безопасности.
- Система Drive Control, снижающая скорость на поворотах.
- Система Lift Control обеспечивает контроль за скоростью движения телескопической мачты.
«Умная» электроника
- Высокоточное перемещение на нужное расстояние.
- Адаптивность к различным условиям работы за счет многозадачности программного обеспечения.
- Электропогрузчик запоминает выполненные процессы и ошибки в памяти, тем самым сокращается время простоя техники при ТО.
- Рулевое колесо и скорость движения фиксируются при базовом исполнении.
Основные преимущества
- Эргономичное и удобное место работы оператора.
- Тормозная система на основной оси не требует замены и техобслуживания.
- Нововведения в системе безопасности груза и оператора электропогрузчика.
- Современная система экономии энергии.
- Двигатели Jungheinrich электрического исполнения не требуют ТО.
- Высокоинтеллектуальная система управления и контроля.
Инструкция по эксплуатации Jungheinrich 213, 215, 216k, 216, 218k, 218, 220 — instruction-efg-213-200.pdf
-
15.03.2018
-
13.03.2018
-
9.10.2017
-
29.08.2017
German-made Jungheinrich loading equipment is distinguished by excellent durability and
performance. Benefit from consistently high handling speeds with maximum comfort. This European-quality equipment perfectly adapts to various operating conditions, meets strict safety standards,
is distinguished by high working and driving qualities for moving and storing goods for work both in an open area and inside a closed warehouse or a freight railway container.
Jungheinrich LPG trucks, like trucks from other brands of this type, have a number of advantages. This is a universal warehouse
equipment, which is very economical if, when buying it, you correctly calculate the basic requirements for the height of lifting of loads, carrying capacity, speed of movement, weight of the
machine, its dimensions and, of course, the types of cargo with which the machine has to deal. If the calculation is carried out carefully, and the optimal model is chosen, the costs for it,
given the low price of gas, will pay off in a few months. And due to its high ecological class, it can work on a shift all day long with practically different cargoes that require specific
transportation conditions. The peculiarity of gas forklifts is that you can start them in any weather without any problems, which can not be said about diesel or gasoline ones.
Jungheinrich electric forklift EFG 115
The EFG 115 is the most compact electric forklift from the German concern Jungheinrich. It can be used in the smallest rooms,
including wagons and wagons. It has the following technical characteristics:
The distribution of weight to the front axle is 3805/1270.
Carrying capacity — 1500 kg.
Total weight 2870 kg.
Engine:
running — 4 kW;
lifting — 6 kW.
The maximum speed is 12.5 km / h.
Clearance — 100 mm.
The wheelbase is 1200 mm.
The center of gravity of the load on the forks is 500 mm.
Mast tilt (a / b) in degrees — 5/6.
Mast — 2000-3550 mm.
Working corridor width:
across — 3114 mm;
along — 3236 mm.
The total width is 990 mm.
The total length is 2935 mm.
The service brake is hydraulic.
The maximum lifting height is 3000 mm.
The maximum climb is 16 degrees.
Fork dimensions (LxWxH) — 1150x100x35 mm.
Lifting speed with / without load — 240/500 mm / s.
Lowering speed with / without load — 580/600 mm / s.
It is worth noting that it is quite difficult to find a new Jungheinrich EFG 115 loader in the domestic market. However, these
forklifts are quite widely used, and here the price depends on the condition of the machine. In general, the cost can vary from 3,000 to 10,000 euros. The new EFG 115 will cost about 18,500
euros.
Electric forklift Jungheinrich EFG 215
The second series of EFG loaders differs from the first in a large set of technical options. All this could not but affect the cost, which will be
slightly higher than the 115 model. However, first, let’s look at the technical specifications:
The distribution of weight to the front axle is 3870/1310.
Carrying capacity — 1500 kg.
Total weight 2978 kg.
Engine:
running — 4.6 kW;
lifting — 11.5 kW.
Storage battery (voltage V / capacity kW * h) — 48/500.
The maximum speed is 16 km / h.
Clearance — 100 mm.
The wheelbase is 1249 mm.
The center of gravity of the load on the forks is 500 mm.
Mast tilt (a / b) in degrees — 7/7.
Mast — 2000-3560 mm.
Working corridor width:
across — 3104 mm;
Along — 3226 mm.
The total width is 1060 mm.
The total length is 2924 mm.
The service brake is electromechanical.
The maximum lifting height is 3000 mm.
The maximum climb is 35 degrees.
Turning radius — 1440 mm.
Fork dimensions (LxWxH) — 1150x100x35 mm.
Lifting speed with / without load — 460/600 mm / s.
Lowering speed with / without load — 550/550 mm / s.
As you can see from the technical characteristics, this car has almost the same dimensions as the previous model, but with more powerful motors and
improved other indicators.
Jungheinrich Service Manual
Jungheinrich DFG/TFG
660-690 Operating Instructions
Models: DFG 670; DFG
680; DFG 690; DFG S80; DFG S90; TFG 660; TFG 670; TFG 680; TFG 690; TFG S80; TFG S90; DFG S90.
Jungheinrich DFG S80
Service Manual
Models: TFG 680; DFG 670; DFG 660; DFG 680; DFG 690; DFG S80; DFG S90; TFG 660; TFG 670; TFG 690; TFG S80; TFG S90.
Jungheinrich DFG TFG
316-435 Operating Instructions
Models: TFG 430; DFG 320; DFG 425; DFG 430; DFG 435; TFG 316; TFG 320; TFG 425; TFG 435.
Jungheinrich EFG-Vac 22-30/ 25L/S/SL Service Manual Download
Jungheinrich ECE 225 (90309857) Spare Parts Catalogue Download
Jungheinrich EJC 110/112 Operating instructions Download
Jungheinrich DFG/TFG 16 — 50 A/B/C-K Operating instructions Download
Jungheinrich DFG 660 Service Manual Download
Jungheinrich DFG 670 Service Manual Download
Jungheinrich DFG S80 Service Manual Download
Jungheinrich DFG_TFG 316-435 Operating Instructions Download
Jungheinrich ECE 225 Spare Parts Catalogue Download
Jungheinrich EFG 213-320 Operating Manual Download
Jungheinrich EFG-Vac 22 Service Manual Download
Jungheinrich EFG-Vac 25L Service Manual Download
Jungheinrich EFG-Vac 30 Service Manual Download
Jungheinrich EJD 220 Service Manual Download
Jungheinrich ERE 120 Service Manual Download
Jungheinrich ETM 214 Service Manual Download
Jungheinrich ETM 216 Service Manual Download
Jungheinrich ETM 325 Service Manual Download
Jungheinrich ETV 214 Service Manual Download
Jungheinrich ETV 216 Service Manual Download
Jungheinrich ETV 318Service Manual Download
Jungheinrich ETV 320 Service Manual Download
Jungheinrich ETV 325 Service Manual Download
Jungheinrich EZS 330 XL Operating Instructions Manual Download
Jungheinrich EZS 350 XL Operating Instructions Manual Download
Jungheinrich SLH 200 Service Manual Download
Jungheinrich TFG 660 Service Manual Download
Jungheinrich Fault Codes
Jungheinrich Fault Codes Download
Jungheinrich EJC112 & E1202 Event Messages Codes List Download
Jungheinrich Error Codes List Download
Jungheinrich Fault Codes Download
Jungheinrich LISTADO ERRORES Download
Jungheinrich System Error Codes list Download
Jungheinrich System Error Codes list Download
Jungheinrich System Error Codes list Download
Jungheinrich forklifts
The manufacturer of forklifts is Jungheinrich, which is a leader in the production and sale of industrial, warehouse and material handling equipment. The company began its journey from 1953, when
a small loader company was founded, and by 2011 the company had several factories at its disposal.
Purpose
Forklifts are mainly used to work in warehouses, but without them they are very rarely managed in large-scale industries. They carry loads that are placed on pallets. Due to the version with a
closed cabin, they are able to work even in places with unfavorable external environment, namely, with wind, dust, sparks, sawdust, steam, and so on.
Electric
Electric loaders are represented by 5 series, which differ in load capacity, low unloading height, technology, maneuverability, as well as convenience of the operator’s workplace.
1 series EFG 110/113/115. The letters mean that this is an electric forklift, the first number indicates the series, and the second two are the maximum carrying
capacity in hundreds of kilograms. These are lightweight and compact loaders that have just one rear wheel. Thanks to these parameters, they have excellent maneuverability and can move even
inside the truck body. However, these «kids» are able to work with a weight of from 1 to 1.5 tons and lift the load to a height of 6.5 meters. AC control electronics may be updated.
EFG 213/215 / 216k / 216 / 218k / 218/220. The index k near some models indicates that the model has a smaller battery, a shorter base and a shorter fork body. This series has
the same dimensions and related benefits. However, the maximum load capacity is increased, as well as equipped with a large number of technologies. In the loader, an electric power steering was
added, the ability to independently configure 5 work programs, replace batteries, a more thoughtful security system, an automatic parking brake, smart electronics, and a maintenance-free brake
system and electric motor. The case in these loaders is integral, which provides greater stability when maneuvering.
EFG 316 / 316k / 318 / 318k / 320. The main differences between these trucks from previous models is that they have 4 wheels and a fully enclosed cab with front and rear window
cleaner. The control system is now electro-hydraulic, which provides better handling. Cab stances were enhanced, and the lighting system and battery compartment received additional protection.
EFG 540k / 540 / 545k / 545/550 / S40 / S30. These are the most powerful and big electric lift trucks. The maximum unloading height has also been increased, but only to 7.18
meters. You can use various packages of additional functions that determine the operation of the loader. In this series, more attention is paid to operator safety, as well as comfort and
ergonomics of the workplace.