Commissioning and Operation
If the module has not achieved the correct operating status, there are
several options available for error diagnostics:
• Evaluating the operating status LED
• Evaluating the output paramter ERR of SB 236
(see ST SB ControlNet — Software Manual)
• Evaluating the data block for status information DB_S
(see ST SB ControlNet — Software Manual)
• Bus diagnostics via the NAP-interface for the module
For this purpose an additional monitoring tool is required. Further
information can be found in the relevant operating mnaual for the
monitoring tool.
Operation
The module is operated on ControlNet using a software package from
Pilz. It contains the standard function block SB 236 which runs in the
standard section of the PSS. It is used for communication between the
PSS and other ControlNET subscribers (send/receive data).
More detailed information on SB 236 can be found in a separate operating
manual «ST SB ControlNet — Software Manual». This is supplied with the
software package.
7-2
PSS(1) ControlNet Adapter — Hardware Manual
Содержание
- Pilz PSS Series Manuals
- (9) Pilz PSS Series Control Unit PDF User Guide(s)
- Related for Pilz PSS Series:
- More Controller Instructions:
- The Datasheet Archive
Pilz PSS Series Manuals
(9) Pilz PSS Series Control Unit PDF User Guide(s)
- #1644710 | Pilz PSS Series
- Power Supply
- pilz/pss-series_1644710.pdf
- 21
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
 |
|
PSSu K S RS232 Modbus ASCII, 26 Mar 2022 (#BJR7DH)
PSSu E PD1-T, 04 Apr 2022 (#BWL8YV)
PNOZ mc3p, 10 Jan 2023 (#42PKHN)
PSS Series, 23 Oct 2022 (#21SQ7C)
PNOZmulti PNOZ mmc3p, 02 Jan 2023 (#DSZ4WQ)
PSS Series, 31 Dec 2022 (#RST7OY)
More Controller Instructions:
#8O4M44: COOPER POWER SERIES Installation instructions manual
COOPER POWER SERIES, 20, eaton/cooper-power-series.pdf
User’s and service manual (N5261A, #JKP553)
N5261A, 99, keysight-technologies/n5261a.pdf
Engineering manual (KM Series, #9H1W74)
KM Series, 40, ascon-tecnologic/km-series.pdf
Operation & user’s manual (BSP, #39OG7C)
BSP, 24, studer/bsp.pdf
Technical specification and instruction manual (MELDAS MDS-R Series, #94QI2U)
MELDAS MDS-R Series, 285, mitsubishi-electric/meldas-mds-r-series.pdf
Controller NT935 Instruction manual, #9493UP
Источник
The Datasheet Archive
Part
ECAD Model
Manufacturer
Analog Devices Inc
| Description | Datasheet Download | Buy Part |
|---|---|---|
| ADUM3190SRQZ-RL7 | 2.5kV rms Isolated Error Amplifier |  |
Catalog Datasheet
MFG & Type
pilz PSS 3074 ERROR
Abstract: pilz PSS 3074 display ERROR pilz PSS 3047-3 ai PSS 3075 pilz pss cable pilz pss 3046 PSS 3075-3 error Optocoupler 232 filter pilz PSS PSS 3075-3
Text: Kit 3046/ 3074 (screw connector for upgrading the terminals for supply voltage of a PSS 3046/ PSS 3074 to a PSS of the PSS 3047-3/ PSS 3075-3 series) PSS ZCM Cable Mounting Plate (bracket for strain , Compact programmable safety systems Compact programmable safety system PSS 3047-3 AI Ip Technical Details PSS 3047-3 AI Ip Function Application range Compact programmable safety system , Isolation of the supply voltage between , PSS PWR», ,X1/X2 PWR» and ,AI PWR» Approvals PSS 3047-3 AI
pilz PSS 3074
Abstract: 3074-B PSS-D-2-276-02 LED 3074 pss pilz cpu 3 PILZ 301 370 pilz PSS
Text: Compact Safety Systems Compact Safety System PSS 3074 Technical Details PSS 3074 Function , speed for cycles in which time is critical Approvals PSS 3074 Program memory , PSS 3074 1 Description The PSS 3074 is a compact safety system within a single housing. Connections are made via screw , ) Vibration resistance (EN 60068-2-27, 03/93) (EN 60068-2-29, 04/93) EMC PSS 3074 48, 6 of which are
pilz PSS 3074 ERROR
Abstract: pilz PSS 3074 display ERROR pilz PSS 3047-3 ai PSS 3075-3 error PSS 3075 F800H pilz PSS PSS 3075-3 pilz pss cable pilz pss 3046
Text: Measurement Error at 25 В°C 1 24 VDC 20 . 30 VDC including residual ripple of max. В± 1.2 V » PSS PWR , ) PSS ZKL Upgrade Kit 3046/ 3074 (screw connector for upgrading the terminals for supply voltage of a PSS 3046/ PSS 3074 to a PSS of the PSS 3047-3/ PSS 3075-3 series) PSS ZCM Cable Mounting Plate , Compact programmable safety systems Compact programmable safety system PSS 3047-3 AI Technical Details PSS 3047-3 AI Function Application range Compact programmable safety system Failsafe
PSS 3075-3
Abstract: pilz pss 3046 3047 PILZ CABLE RS 232 pilz pss cable pilz pss 3047-3
Text: Standard section: Integral 512 kByte Flash-EPROM memory Approvals PSS 3047-3 Pilz GmbH & Co , 3047-3 (set of spring-loaded terminals) PSS ZKL Upgrade Kit 3046/ 3074 (screw connector for upgrading the terminals for supply voltage of a PSS 3046/ PSS 3074 to a PSS of the PSS 3047-3/ PSS 3075-3 , Compact programmable safety systems Compact programmable safety system PSS 3047-3 Technical Details PSS 3047-3 Function Application range Compact programmable safety system Failsafe
PSS 3075-3
Abstract: pilz pss cable PSS 3075 PILZ X1 pilz pss 3046
Text: PSS 3075-3 Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-StraГџe 2, 73760 Ostfildern , terminals) PSS ZKL Upgrade Kit 3046/ 3074 (screw connector for upgrading the terminals for supply voltage of a PSS 3046/ PSS 3074 to a PSS of the PSS 30473/ PSS 3075-3 series) PSS ZCM Cable Mounting Plate , Compact programmable safety systems Compact programmable safety system PSS 3075-3 Technical Details PSS 3075-3 Function Application range Compact programmable safety system Failsafe
pilz PSS error evaluation
Abstract: PAS4000 Pilz pilz PSS Faults pssu h plc1 fs sn sd ea57 PSS 4000 pilz manual pilz PSS pilz block diagram
Text: PSS 4000 Emergency Stop with PITestop Product Type: Name: Manufacturer: FS_EmergencyStop, FS_OutputFBL PSS 4000, Blocks, PAS4000, PLC, IL Pilz GmbH & Co. KG, Safe Automation Document Release , PSS 4000 PLC. The safe control and evaluation of the signals is taken over by two Pilz Function , button is overridden, the Pilz function block will detect this as an error at the next operation. A , invalid and the Pilz function block provides an appropriate diagnostic message. The error signal reset
317-xx
Abstract: PAS4000 Pilz PSEN S3 Pilz PSS4000 PSS 4000 safety manual pilz PSS pilz safety plc pilz PSS Faults
Text: PSS 4000 Safety Gate with PSENmech (me2) Product Type: Name: Manufacturer: FS_SafetyGate, FS_OutputFBL PSS 4000, Blocks, PAS4000, PLC, IL Pilz GmbH & Co. KG, Safe Automation Document Release , 42 pt Application Note В No. 1002024_EN_02 56 pt PSS 4000 Safety Gate with PSENmech (me2 , Adjustments for publication on Pilz website, only editorial, New Function block library, Valid bit , 742 pt 756 pt All rights to this publication are reserved by Pilz GmbH & Co. KG. We reserve the
PAS4000
Abstract: Pilz PSEN S3 pilz PSS pilz PSS error evaluation Pilz pilz PSS Faults PSENopt Pilz PSEN 588-EN-xx 317-xx
Text: PSS 4000 Light Curtain with PSENopt Product Type: Name: Manufacturer: FS_LightCurtain, FS_OutputFBL PSS 4000, Blocks, PAS4000, PLC, IL Pilz GmbH & Co. KG, Safe Automation Document Release , invalid and the Pilz function block provides an appropriate diagnostic message. The error signal reset , 42 pt Application Note В No. 1002025_EN_02 56 pt PSS 4000 Light Curtain with PSENopt 70 , Adjustments for publication on Pilz website, only editorial New Function block library, Valid bit 2+3
psen sl-1.0p
Abstract: PSS 4000 pilz PSS error evaluation PAS4000 pilz psenslock pilz block diagram pilz PSS Faults Pilz PSEN Pilz PSEN S3 PSEN SL
Text: PSS 4000 Safety Gate with PSENslock Product Type: Name: Manufacturer: FS_SafetyGate, FS_OutputFBL PSS 4000, Blocks, PAS4000, PLC, IL Pilz GmbH & Co. KG, Safe Automation Document Release , is invalid and the Pilz function block provides an appropriate diagnostic message. The error signal , 42 pt Application Note В No. 1002026_EN_03 56 pt PSS 4000 Safety Gate with PSENslock 70 , Chapter Creation all Adjustments for publication on Pilz website, only editorial, New
pilz PSS error list
Abstract: allen bradley 5572 Allen Bradley PLC pss pilz cpu 3 error list pss pilz cpu 3 fault pilz error list pilz PSSu error list 1756-DNB pilz fault code Allen-Bradley 1756-DNB
Text: , PSSu H DN Pilz GmbH & Co. KG, Safe Automation Document Release Number: Release Date: 02 19 , 756 pt All rights to this publication are reserved by Pilz GmbH & Co. KG. We reserve the right to , companies. 770 pt 784 pt 798 pt 812 pt 826 pt Pilz GmbH & Co. KG, Felix-Wankel-StraГџe 2, 73760 , round the clock! Technical support is available from Pilz round the clock. This service is provided , 711 3409-444 or mailto:support@pilz.com 630 pt 644 pt 658 pt 672 pt 686 pt Pilz GmbH & Co
pilz pss plug
Abstract: network tester pilz PSS pilz pss cable PSS SB TESTER
Text: Safe Bus Systems Network tester for SafetyBUS pВ® PSS SB TESTER Technical details PSS SB , temperature Condensation EMC Mechanical data Housing material Weight Dimensions (H x W x D) Pilz GmbH , tester for SafetyBUS pВ® PSS SB TESTER The PSS SB TESTER is a hand-held device that can be used to , the lines CAN_H and CAN_L Real-time measurements — Measures the bus load — Measures error rate , the device’s display or can be uploaded to a PC using the software supplied. The PSS SB TESTER is
pilz pss 3000
Abstract: F800H
Text: PSS AI PSS 3000 PSS AI 301 121 Pilz GmbH & Co. KG, Sichere Automation, Felix-Wankel-StraГџe 2 , : pilz.gmbh@pilz.de PSS1 AI PSS 3100 PSS1 AI 302 121 PSS-D-2-065-2007-02 Pilz , Modular Safety Systems Analogue Input PSS AI, PSS1 AI Technical Details PSS AI Function , VDC with 12 bit resolution Galvanic isolation in digital section Approvals PSS AI PSS1 AI , Significant Bit (LSB) Input Type Input Impedance Measurement Error at 25 В°C Temperature Coefficient
pilz PSS error list
Abstract: pilz PSS Faults pilz error list rk512 rk512 protocol 231-CT PMI 126-CT pilz PSS error evaluation 226-CT pilz PSS
Text: Error stack System ST SB FE PMI The software package contains standard function blocks for PSS , PSS programmable safety system to be displayed: From the CPU error stack From MBS blocks From , designed so that users can easily integrate their own screens. PSS error stack: If a fault should cause the PSS FS section to stop, it is possible to display the CPU error stack, which will show the , Evaluation with PMI» cannot be combined on a PSS-CPU with other software packages available for PSS error
Optocoupler 232 filter
Abstract: pilz PSS 3047-3 ai ETH-2 pilz modbus eth ca-50 cable
Text: Compact programmable safety systems Compact programmable safety system PSS SB 3047-3 AI Ip ETH-2 Technical Details PSS SB 3047-3 AI Ip ETH-2 Function Application range Compact programmable safety , Isolation of the supply voltage between » PSS PWR», «X1/X2 PWR» and » PSS AI» SafetyBus p-Interface A , Ethernet (TCP/IP) Approvals PSS SB 3047-3 AI Ip ETH-2 Program memory SafetyBUS p Transmission , Status display 1 24 V DC 20 . 30 VDC including residual ripple of max. В± 1.2 V » PSS PWR»: max
pilz PSS 3047-3 ai
Abstract: F800H
Text: Compact programmable safety systems Compact programmable safety system PSS SB 3047-3 AI ETH-2 Technical Details PSS SB 3047-3 AI ETH-2 Function Application range Compact programmable safety , Isolation of the supply voltage between » PSS PWR», «X1/X2 PWR» and » PSS AI» SafetyBus p-Interface A , Ethernet (TCP/IP) Approvals PSS SB 3047-3 AI ETH-2 Program memory SafetyBUS p Transmission , Status display 1 24 V DC 20 . 30 V DC including residual ripple of max. В± 1.2 V » PSS PWR»: max
pilz PSS error evaluation
Abstract: PLC5 compact plc FB001 PLC-5 SB236 CONTROLNET pilz safety plc SB047 SB056
Text: PSS-CPU with other software packages available for PSS error evaluation. PSS-D-2-290-07/02 Pilz , PSS error evaluation with SIMATIC S7 via the ControlNet. Software package Error evaluation , -5 Suitable for compact and modular PSS The software package , Error evaluation with PLC-5″ enables you , the PSS standard section and the PLC-5: Evaluation of the CPU error stack, the error stacks, and , Standard Function Blocks for the Standard Section ST SB FE PLC-5 — Error evaluation with PLC
pss pilz cpu 3 fault
Abstract: AK 061 PSS1 pilz fs fault pilz pss 3000
Text: one PSS q A number of different error reactions are possible q Easily configured using the , Modular Safety Systems Central Processing Unit, Selective Shutdown PSS SF CPU, PSS1 SF CPU Technical Details PSS SF CPU Function Application Area Central processing unit Failsafe , shutdown on the modular PSS means increased availability when errors occur on individual PSS inputs or , interface plus communications interface q Status and diagnostic display Approvals PSS SF CPU PSS1 SF
pilz PSS error evaluation
Abstract: sb232 simatic SIMATIC S7 simatic s7 212 profibus SB202 SB230 system software for s7 pilz PSS
Text: software packages available for PSS error evaluation. PSS-D-2-283-11/02 Pilz , Standard Function Blocks for the Standard Section ST SB FE S7 — Error evaluation with SIMATIC S7 Error stack System ST SB FE S7 The software package contains standard function blocks for the PSS , SIMATIC S7 Suitable for compact and modular PSS Description The software package , Error evaluation , package contains blocks for the PSS standard section and the SIMATIC S7: Evaluation of the CPU error
gsd file of pilz plc
Abstract: pilz pilz PSS Beckhoff plc pilz safety plc M116 st 9540
Text: PSS FS Configuration Fig. 7: PSSu Configurator В Configuration of PSSu system Pilz GmbH & Co. KG , output of the PSSu E F DI OZ 2 for switching through the Beckhoff and enabling by PSS . Pilz GmbH & Co , DN Pilz GmbH & Co. KG, Safe Automation Document Release Number: Release Date: 04 19 July , Creation all 02 2009-03-08 Error correction with the type of PSSu device, new Overview 2, 3 , rights to this publication are reserved by Pilz GmbH & Co. KG. We reserve the right to amend
pilz pss 3000
Abstract: pilz safety manual PSS 3075 pilz PSS Pilz GmbH PSS 3075-3 pilz manual
Text: PSS Serial-to-Ethernet connection Product Type: Name: Manufacturer: PSS PSS CPU, PSS SB CPU Pilz GmbH & Co. KG, Safe Automation Document Release Number: Release Date: 02 26 July , _EN_02 56 pt PSS Serial-to-Ethernet connection 70 pt 84 pt 98 pt 112 pt Document Revision , 756 pt All rights to this publication are reserved by Pilz GmbH & Co. KG. We reserve the right to , companies. 770 pt 784 pt 798 pt 812 pt 826 pt Pilz GmbH & Co. KG, Felix-Wankel-StraГџe 2, 73760
PSS4000
Abstract: PAS4000 modbus PAS4000 PSS 4000 pilz modbus Pmi326 100146 plc projects ModRTU-32
Text: PSS 4000 Modbus TCP configuration Product Type: Name: Manufacturer: Modbus TCP PSS 4000, PAS4000 Pilz GmbH & Co. KG, Safe Automation Document Release Number: Release Date: 03 24 , . 1002065_EN_03 56 pt PSS 4000 Modbus TCP configuration 70 pt 84 pt 98 pt 112 pt Document , Creation all 168 pt 02 2010-08-23 Adjustments for publication on Pilz website only editorial 182 pt 03 2010-11-24 Adjustments for publication on Pilz website only editorial
PILZ CABLE RS 485
Abstract: Profibus pilz DIN EN 60068-2-14 pilz pss cable PILZ CABLE RS 232 pilz PSS pilz PSS 3006-3
Text: PSS SB 3006-3 DP-S Standard function blocks from the Pilz software package «ST-SB-DP-S» are , Safe Bus Systems Compact safety system with SafetyBUS pВ® connection PSS SB 3006-3 DP-S Technical details PSS SB 3006-3 DP-S Function Compact programmable safety system for decentralised , Application range Electrical data Supply voltage Tolerance Current consumption PSS SB 3006-3 DP-S , is critical A fibre-optic coupler may be connected to SafetyBUS p Approvals PSS SB 3006-3 DP-S
transistor 3006
Abstract: No abstract text available
Text: system with SafetyBUS pВ® connection PSS SB 3006-3 DN-S Standard function blocks from the Pilz software , Safe bus systems Compact safety system with SafetyBUS pВ® connection PSS SB 3006-3 DN-S Technical Details PSS SB 3006-3 DN-S Function Compact programmable safety system for decentralised , , EN 61508, 12/98 Application range Electrical data Supply voltage Tolerance PSS SB 3006-3 , Transmission type Connection » PSS PWR»: 24 VDC 20 . 30 VDC including residual ripple of max. В± 1.2 V
EF20H
Abstract: Serial Interfaces 232-RS 301 111 pilz
Text: Communication Serial interfaces PSS SER, PSS1 SER Technical details Function Application range , display Transmission rate Standard communications module to expand the PSS with two serial , ‘s parameters via configuration data blocks Approvals PSS SER PSS1 SER PSS SER Serial , , 16 ms EN 61000-6-2, 08/02 EN 61000-6-4, 08/02 EN 55011Class A, 08/03 Pilz GmbH & Co. KG , interfaces PSS SER, PSS1 SER Description The communications module PSS (1) SER expands a modular safety
Abstract: EG-3-01 pilz safetybus cable
Text: Safe Bus Systems Compact safety system with SafetyBUS pВ® connection PSS SB2 3006-3 DP-S Technical details PSS SB2 3006-3 DP-S Function Compact programmable safety system for , Transmission rate Cable runs Transmission type Connection PSS SB2 3006-3 DP-S PROFIBUS-DP Application range Device type Status indicator Station address Transmission rate Connection » PSS PWR»: 24 VDC, PS-2 20 . 30 VDC including residual ripple of max. В± 1.2 V » PSS PWR»: 650 mA plus load
Источник
| Document Tags | |
|---|---|
-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
Programmable Safety Systems
PSS-Range
PSS(1) ControlNet Adapter
Hardware Manual
Item No. 19 905
The spirit of safety.
Related Manuals for Pilz PSS Series
Summary of Contents for Pilz PSS Series
-
Page 1
Programmable Safety Systems PSS-Range PSS(1) ControlNet Adapter Hardware Manual Item No. 19 905 The spirit of safety. -
Page 2
All rights to this manual are reserved by the publishers. Copies may be made for internal purposes. While every effort has been made to ensure that the information in this manual is accurate, no responsibility can be accepted for errors or omissions contained within it. We reserve the right to amend any specifications without prior notice. -
Page 3: Table Of Contents
Contents Introduction Overview of manual Terminology Definition of symbols Overview Module versions Software package Range Safety Intended use Warranty and liability Disposal Safety guidelines Use of qualified personnel Unit-specific safety regulations Installing the module Cable material and cable layout Measures to protect against interference Assembling and connecting the module Function Module’s operating elements…
-
Page 4
Contents Module Front view Cables and interfaces ControlNet connections ControlNet connection cable Cable runs Network Access Port Conenction cable for the Network Access Port Net Address LEDs for operating and error status LED «module status» LED » A » and LED » B » (network status) Installation and Configuration Installing the module in the module rack Configuration… -
Page 5
Appendix Changes to the operating manual PSS(1) ControlNet Adapter — Hardware Manual… -
Page 6: Introduction
Introduction This manual describes the hardware of the communications modules • PSS ControlNet Adapter and • PSS1 ControlNet Adapter. To fully understand this manual you will need to be conversant with the information found in the general documentation for the PSS-range (Safety Manual, System Description, Installation Manual, Programming Device and Programming Manual).
-
Page 7
Introduction Overview of documentation 1 Introduction The introduction is designed to familiarise the user with the contents and structure of this manual and the definition of the symbols used within the manual. 2 Overview Provides information on the most important features of the module and gives a brief outline of the application area. -
Page 8: Terminology
Terminology • Throughout this manual the designation “module” or “PSS(1) ControlNet Adapter” is valid for all module versions. If the description relates to a specific module, then the product name for the module will be used (e.g. PSS ControlNet Adapter). •…
-
Page 9: Definition Of Symbols
Introduction Definition of symbols Information in this manual that is of particular importance can be identified as follows: DANGER! This warning must be heeded! It warns of a hazardous situation that poses an immediate threat of serious injury and death, and indicates preventive measures that can be taken.
-
Page 10: Overview
03/1998. The PSS operates in conjunction with the module and the relevant software package as the ControlNet Adapter. Pilz programmable safety systems (PSS) have been designed for use in plant and machinery safety circuits. They consist of a failsafe (FS) setion and a standard (ST ) section.
-
Page 11: Software Package
Overview Software package There is a separate software package available for data exchange between the PSS and the ControlNet Scanner. The standard function block within the software must be incorporated within the user program in the standard section of the PSS. It carries out all of the tasks for data exchange between the PSS and the ControlNet Scanner.
-
Page 12: Safety
PSS 3100. The module may only be used in conjunction with the software package «ST SB ControlNet» from Pilz. Details of the module can be found in the chapter “Technical Details”. Use of the standard function block outside the specifications will be deemed as improper application.
-
Page 13: Warranty And Liability
Safety Warranty and liability All claims to warranty and liability will be rendered invalid if • The module was used contrary to the purpose for which it is intended • Damage can be attributed to not having followed the guidelines in the operating manual •…
-
Page 14: Safety Guidelines
Safety guidelines This chapter is an important part of this manual. Failure to keep to the following guidelines and safety requirements will render all warranty, guarantee and liability claims invalid. All rules and regulations for accident prevention relating to the specific area of application must be met.
-
Page 15: Installing The Module
Safety Installing the module • Please read the Safety Manual and the Installation Manual for the relevant PSS before installing and commissioning the module. • Keep as large a distance as possible between the PSS and any electromagnetic fields, particularly when frequency converters are nearby.
-
Page 16: Function
The module supports data exchange for Scheduled and Unscheduled Data. Data transfer on ControlNet is carried out using a fixed bit rate of 5 MBit/s. The software package from Pilz is required for commissioning and operating the module. The module occupies part of the range of freely-programmable word modues (XW-access) on the PSS.
-
Page 17: Module Interfaces
Function Description Module interfaces The module has two ControlNet interfaces (channel A and channel B) and a connection for temporary bus access (NAP). ControlNet interfaces There are two channel available to connect the module to ControlNet redundantly. It is connected via two standard BNC plug connectors. They are marked as “…
-
Page 18: Module
Module Front view Operating status and error LEDs: • Communication: module and PSS module status (module status) • Communication: ControlNet (channel A and B) x 10 Rotary switches to set the address Net Address Network Access Port (NAP) for temporary access Interfaces to connect to ControlNet (channel A and B) ControlNet…
-
Page 19: Cables And Interfaces
Module Cables and interfaces ControlNet connections Connections for ControlNet channel A and channel B use Standard BNC-connectors. Requirements for the BNC-connectors are defined in the ControlNet International Specification (Version 2.0, 03/1998) in the chapter «Connectors». ControlNet connection cable The ControlNet International Specification specifies that the connection cable used for the Trunkline (remote bus) and Droplines (stub lines) should be coax cable.
-
Page 20: Network Access Port
INFORMATION More detailed information on the topology conditions can be found in the ControlNet International Specification (from Version 2.0, 03/1998). Network Access Port Socket for western plug connector 1: GND REF (RJ45) 2: N.C. 8-pin 3: Tx_H 4: Tx_L 5: Rx_L 6: Rx_H 7: N.C.
-
Page 21: Net Address
Module Net Address x 10 Sets the tens for the address address Sets the units for the address Fig. 5-5: Setting the Net Address (shown here as 25 Valid values for the Net Address are 0 … 99 INFORMATION Set the Net Address when the module is switched off. A change to the net address will have no effect once the system has powered up PSS(1) ControlNet Adapter — Hardware Manual…
-
Page 22: Led «Module Status
LEDs for operating status and errors LED «module status» The LED «module status» displays the module’s operating status. It also signals errors. LED «module status» Description LED off No supply voltage applied or module not ready for bus communication LED red Self-check (after power-up) or major internal error (cannot be removed) LED flashing red…
-
Page 23: Led » A «And Led » B » (Network Status)
Module LED “ A ”and LED “ B ” (network status) LEDs display the network status and errors for both redundant ControlNet- channels. Priority LED status Description diaplay LED » A » Highest switched off Reset or no supply voltage LED «…
-
Page 24: Installation And Configuration
Installation and Configuration Installing the module in the module rack Install the module as described in the modular PSS “Installation Manual”. CAUTION! Electrostatic discharge (ESD) can damage components on the PSS. Ensure against discharge before installing the in the module rack, e.g. by wearing an earthed wristband.
-
Page 25: Bus Termination
Installation and Configuration Bus termination ControlNet International Specification requires that the coaxial cable for the Trunkline is fitted with terminating resistors at the start and end of the bus. For this reason use a Standard-T-connection piece for coaxial cable with standard coaxial cable-terminating resistors.
-
Page 26: Commissioning And Operation
Commissioning and Operation Initial commissioning Testing the components Before operating the module, ensure the follwoing points are met: • The module must be on a slot in the module rack on the standard bus of the PSS. How to install the module correctly is described in the “Installation Manual”…
-
Page 27: Error Diagnostics
Operation The module is operated on ControlNet using a software package from Pilz. It contains the standard function block SB 236 which runs in the standard section of the PSS. It is used for communication between the PSS and other ControlNET subscribers (send/receive data).
-
Page 28: Technical Details
Technical Details Electrical data Power consumption Average: 380 mA Interfaces ControlNet (galvanically isolated) Network Adapter Port Bus interface BNC-plug connector for channel A/B Network Adapter Port 8-pin Western-socket (RJ45) ControlNet Device type Adapter Status indicator Error indicator Bit rate 5 MBit/s (fixed) Net Address Set via rotary switches in the range 0 …
-
Page 29
Technical Details Environmental data Protection type (EN 60 529, 10/91) IP 20 (installed on module rack) Ambient temperature (DIN IEC 68-2-14, 06/87) 0 … +60 °C Storage temperature (EN 60068-2-1/-2, 03/93) 0 … +70 °C Climatic suitability (DIN IEC 68-2-30, 09/86) Max. -
Page 30
Appendix Changes to the operating manual Changes from Version II to Version I Changes page page No technical data on «protection class» New: This chapter PSS(1) ControlNet Adapter — Hardware Manual… -
Page 31
Appendix Notes PSS(1) ControlNet Adapter — Hardware Manual… -
Page 32
Notes PSS(1) ControlNet Adapter — Hardware Manual… -
Page 33
Appendix Notes PSS(1) ControlNet Adapter — Hardware Manual… -
Page 34
(07 11) 34 09-1 33 E-Mail: pilz@pilz.co.jp Pilz LP E-Mail: pilz.gmbh@pilz.de 7150 Commerce Boulevard Pilz de Mexico S. de R.L. de C.V . Canton Pilz Skandinavien KS Av. San Ignacio 1079 Michigan 48187 Ellegaardvej 25 L Col. Jardines de San Ignacio 6400 Sonderborg C.P .
-
Contents
-
Table of Contents
-
Bookmarks
Quick Links
Programmable Safety Systems
PSS-Range
PSS(1) ControlNet Adapter
Hardware Manual
Item No. 19 905
The spirit of safety.
Related Manuals for Pilz PSS Series
Summary of Contents for Pilz PSS Series
-
Page 1
Programmable Safety Systems PSS-Range PSS(1) ControlNet Adapter Hardware Manual Item No. 19 905 The spirit of safety. -
Page 2
All rights to this manual are reserved by the publishers. Copies may be made for internal purposes. While every effort has been made to ensure that the information in this manual is accurate, no responsibility can be accepted for errors or omissions contained within it. We reserve the right to amend any specifications without prior notice. -
Page 3: Table Of Contents
Contents Introduction Overview of manual Terminology Definition of symbols Overview Module versions Software package Range Safety Intended use Warranty and liability Disposal Safety guidelines Use of qualified personnel Unit-specific safety regulations Installing the module Cable material and cable layout Measures to protect against interference Assembling and connecting the module Function Module’s operating elements…
-
Page 4
Contents Module Front view Cables and interfaces ControlNet connections ControlNet connection cable Cable runs Network Access Port Conenction cable for the Network Access Port Net Address LEDs for operating and error status LED «module status» LED » A » and LED » B » (network status) Installation and Configuration Installing the module in the module rack Configuration… -
Page 5
Appendix Changes to the operating manual PSS(1) ControlNet Adapter — Hardware Manual… -
Page 6: Introduction
Introduction This manual describes the hardware of the communications modules • PSS ControlNet Adapter and • PSS1 ControlNet Adapter. To fully understand this manual you will need to be conversant with the information found in the general documentation for the PSS-range (Safety Manual, System Description, Installation Manual, Programming Device and Programming Manual).
-
Page 7
Introduction Overview of documentation 1 Introduction The introduction is designed to familiarise the user with the contents and structure of this manual and the definition of the symbols used within the manual. 2 Overview Provides information on the most important features of the module and gives a brief outline of the application area. -
Page 8: Terminology
Terminology • Throughout this manual the designation “module” or “PSS(1) ControlNet Adapter” is valid for all module versions. If the description relates to a specific module, then the product name for the module will be used (e.g. PSS ControlNet Adapter). •…
-
Page 9: Definition Of Symbols
Introduction Definition of symbols Information in this manual that is of particular importance can be identified as follows: DANGER! This warning must be heeded! It warns of a hazardous situation that poses an immediate threat of serious injury and death, and indicates preventive measures that can be taken.
-
Page 10: Overview
03/1998. The PSS operates in conjunction with the module and the relevant software package as the ControlNet Adapter. Pilz programmable safety systems (PSS) have been designed for use in plant and machinery safety circuits. They consist of a failsafe (FS) setion and a standard (ST ) section.
-
Page 11: Software Package
Overview Software package There is a separate software package available for data exchange between the PSS and the ControlNet Scanner. The standard function block within the software must be incorporated within the user program in the standard section of the PSS. It carries out all of the tasks for data exchange between the PSS and the ControlNet Scanner.
-
Page 12: Safety
PSS 3100. The module may only be used in conjunction with the software package «ST SB ControlNet» from Pilz. Details of the module can be found in the chapter “Technical Details”. Use of the standard function block outside the specifications will be deemed as improper application.
-
Page 13: Warranty And Liability
Safety Warranty and liability All claims to warranty and liability will be rendered invalid if • The module was used contrary to the purpose for which it is intended • Damage can be attributed to not having followed the guidelines in the operating manual •…
-
Page 14: Safety Guidelines
Safety guidelines This chapter is an important part of this manual. Failure to keep to the following guidelines and safety requirements will render all warranty, guarantee and liability claims invalid. All rules and regulations for accident prevention relating to the specific area of application must be met.
-
Page 15: Installing The Module
Safety Installing the module • Please read the Safety Manual and the Installation Manual for the relevant PSS before installing and commissioning the module. • Keep as large a distance as possible between the PSS and any electromagnetic fields, particularly when frequency converters are nearby.
-
Page 16: Function
The module supports data exchange for Scheduled and Unscheduled Data. Data transfer on ControlNet is carried out using a fixed bit rate of 5 MBit/s. The software package from Pilz is required for commissioning and operating the module. The module occupies part of the range of freely-programmable word modues (XW-access) on the PSS.
-
Page 17: Module Interfaces
Function Description Module interfaces The module has two ControlNet interfaces (channel A and channel B) and a connection for temporary bus access (NAP). ControlNet interfaces There are two channel available to connect the module to ControlNet redundantly. It is connected via two standard BNC plug connectors. They are marked as “…
-
Page 18: Module
Module Front view Operating status and error LEDs: • Communication: module and PSS module status (module status) • Communication: ControlNet (channel A and B) x 10 Rotary switches to set the address Net Address Network Access Port (NAP) for temporary access Interfaces to connect to ControlNet (channel A and B) ControlNet…
-
Page 19: Cables And Interfaces
Module Cables and interfaces ControlNet connections Connections for ControlNet channel A and channel B use Standard BNC-connectors. Requirements for the BNC-connectors are defined in the ControlNet International Specification (Version 2.0, 03/1998) in the chapter «Connectors». ControlNet connection cable The ControlNet International Specification specifies that the connection cable used for the Trunkline (remote bus) and Droplines (stub lines) should be coax cable.
-
Page 20: Network Access Port
INFORMATION More detailed information on the topology conditions can be found in the ControlNet International Specification (from Version 2.0, 03/1998). Network Access Port Socket for western plug connector 1: GND REF (RJ45) 2: N.C. 8-pin 3: Tx_H 4: Tx_L 5: Rx_L 6: Rx_H 7: N.C.
-
Page 21: Net Address
Module Net Address x 10 Sets the tens for the address address Sets the units for the address Fig. 5-5: Setting the Net Address (shown here as 25 Valid values for the Net Address are 0 … 99 INFORMATION Set the Net Address when the module is switched off. A change to the net address will have no effect once the system has powered up PSS(1) ControlNet Adapter — Hardware Manual…
-
Page 22: Led «Module Status
LEDs for operating status and errors LED «module status» The LED «module status» displays the module’s operating status. It also signals errors. LED «module status» Description LED off No supply voltage applied or module not ready for bus communication LED red Self-check (after power-up) or major internal error (cannot be removed) LED flashing red…
-
Page 23: Led » A «And Led » B » (Network Status)
Module LED “ A ”and LED “ B ” (network status) LEDs display the network status and errors for both redundant ControlNet- channels. Priority LED status Description diaplay LED » A » Highest switched off Reset or no supply voltage LED «…
-
Page 24: Installation And Configuration
Installation and Configuration Installing the module in the module rack Install the module as described in the modular PSS “Installation Manual”. CAUTION! Electrostatic discharge (ESD) can damage components on the PSS. Ensure against discharge before installing the in the module rack, e.g. by wearing an earthed wristband.
-
Page 25: Bus Termination
Installation and Configuration Bus termination ControlNet International Specification requires that the coaxial cable for the Trunkline is fitted with terminating resistors at the start and end of the bus. For this reason use a Standard-T-connection piece for coaxial cable with standard coaxial cable-terminating resistors.
-
Page 26: Commissioning And Operation
Commissioning and Operation Initial commissioning Testing the components Before operating the module, ensure the follwoing points are met: • The module must be on a slot in the module rack on the standard bus of the PSS. How to install the module correctly is described in the “Installation Manual”…
-
Page 27: Error Diagnostics
Operation The module is operated on ControlNet using a software package from Pilz. It contains the standard function block SB 236 which runs in the standard section of the PSS. It is used for communication between the PSS and other ControlNET subscribers (send/receive data).
-
Page 28: Technical Details
Technical Details Electrical data Power consumption Average: 380 mA Interfaces ControlNet (galvanically isolated) Network Adapter Port Bus interface BNC-plug connector for channel A/B Network Adapter Port 8-pin Western-socket (RJ45) ControlNet Device type Adapter Status indicator Error indicator Bit rate 5 MBit/s (fixed) Net Address Set via rotary switches in the range 0 …
-
Page 29
Technical Details Environmental data Protection type (EN 60 529, 10/91) IP 20 (installed on module rack) Ambient temperature (DIN IEC 68-2-14, 06/87) 0 … +60 °C Storage temperature (EN 60068-2-1/-2, 03/93) 0 … +70 °C Climatic suitability (DIN IEC 68-2-30, 09/86) Max. -
Page 30
Appendix Changes to the operating manual Changes from Version II to Version I Changes page page No technical data on «protection class» New: This chapter PSS(1) ControlNet Adapter — Hardware Manual… -
Page 31
Appendix Notes PSS(1) ControlNet Adapter — Hardware Manual… -
Page 32
Notes PSS(1) ControlNet Adapter — Hardware Manual… -
Page 33
Appendix Notes PSS(1) ControlNet Adapter — Hardware Manual… -
Page 34
(07 11) 34 09-1 33 E-Mail: pilz@pilz.co.jp Pilz LP E-Mail: pilz.gmbh@pilz.de 7150 Commerce Boulevard Pilz de Mexico S. de R.L. de C.V . Canton Pilz Skandinavien KS Av. San Ignacio 1079 Michigan 48187 Ellegaardvej 25 L Col. Jardines de San Ignacio 6400 Sonderborg C.P .
Modular Block System: Emergency Stop Circuits
6-25
The acknowledgements
FbL1 and FbL2 are also monitored in the static
condition. If there are discrepancies between the set and true condition, an
error message will be issued (
ENBL = 0) and the contactors will be
switched off immediately (
K1 = 0 and K2 = 0). The error will need to be
reset.
It is possible to reset errors via the input parameter
RSET both when ON =
0 and when
ON = 1. However, a prerequisite for setting the enable and,
when
ON = 1, switching on the contactors, is that the signals from the
feedback loops are correct.
Error messages
Any fault that is detected will be stored in the corresponding error data
word (
SSNR) of the administration data block (1st data block), until the
fault has been fully dealt with.
• Error messages in the administration data block
— Bit 00:
Fault as the signal changes at input parameter
ON,
feedback loop 1 (
FbL1) remains open
Remedy: Check contactor, contacts, cable, input card, output
card, value of input parameter
TFbL and all conditions and
then reset (input parameter
RSET)
— Bit 01:
Fault as the signal changes at input parameter
ON,
feedback loop 1 (
FbL1) remains closed
Remedy: Check contactor, contacts, cable, input card, output
card, value of input parameter
TFbL and all conditions and
then reset (input parameter
RSET)
— Bit 02:
Fault as the signal changes at input parameter
ON,
feedback loop 2 (
FbL2) remains open
Remedy: Check contactor, contacts, cable, input card, output
card, value of input parameter
TFbL and all conditions and
then reset (input parameter
RSET)
Автор:
Sergi2 · Опубликовано: 5 часов назад
Доброго дня, коллеги, вышла из строя карта памяти SRAM/FROM. После замены залил Бэкап с флеш карты из режима IPL, теперь просит сертификацию (ошРС5523), обращался в FANUC, они ответили:
с 18.04.2022 и вплоть до поступления соответствующих распоряжений со стороны FANUC CORPORATION, ООО “ФАНУК” приостанавливает осуществление следующих активностей на территории Российской Федерации
— поставка на территорию РФ и отгрузка заказчикам и клиентам ООО “ФАНУК” всей линейки продукции производства FANUC CORPORATION;
— поставка на территорию РФ и отгрузка заказчикам и клиентам ООО “ФАНУК” любых запчастей (в том числе предоплаченных) к ранее поставленной на территорию РФ продукции производства FANUC CORPORATION;
— оказание сервисного, технического и гарантийного обслуживания ранее поставленной на территорию РФ продукции производства FANUC CORPORATION;
Все перечисленные авансы в адрес ООО «ФАНУК» по заключенным договорам и выставленным счетам, но не отгруженным на данный момент, подлежат обязательному возврату по первому требованию с подписанием соответствующих дополнительных соглашений о расторжении договоров и получении письма-запроса на возврат, оформленного в соответствии с существующими требованиями.
В мануалах про сертификацию ничего нет, единственная ссылка, что необходимо обратиться в FANUC. Прошу откликнуться, mail: kam.tch@mail.ru, заранее благодарю.