Всем привет!
Нужен совет. Мой конфиг:
GA-P41-ES3G
Dual core E2160 1.8Ghz 9×200 (Разгон: 3.06Ghz 9×340)
2x1Gb DDR2-533Mhz dual channel 5-5-5-15 (Разгон: 850Mhz 5-7-7-20)
XFX-9600GSO 768Mb 5401300800 (Разгон: 70015501100)
В общем, первым делом при разгоне камня установил минимальный множитель для памяти (2.00), чтобы не мешала. Т.е. при FSB=340Mhz dram=680 Mhz. Пашет с железной стабильностью и проходит все тесты на ура. Камень дальше не погнался — решил поэксперементировать с памятью: при множителе 2.66 плата вырубается и сама себя сбрасывает — много. Установил 2.50, т.е. при FSB=340Mhz dram=850Mhz — плата стартонула нормально, винда загрузилась, но после пары минут линпаковского теста через ОССТ с использованием максимального количества памяти возник BSOD и произошла самопроизвольная перезагрузка. Повысил вольтаж на память с 1.8V до 2.0V — винда загрузилась, стабильность в работе системы вернулась — можно часами играть в игрушки, смотреть фильмы, слушать музыку, работать с любыми приложениями без всяких сбоев, глюков и перезагрузок — казалось бы всё в норме. Но стоит снова запустить линпаковский тест через ОССТ, как через пару минут тест останавливается с сообщением: «ОБНАРУЖЕНА ОШИБКА» и выдаёт графики температур, ничего при этом не виснет.
Вопрос: стоит ли обращать на это внимание, если, повторюсь, в общем система работает без сбоев (во всяком случае пока не заметил), и чем это грозит?
Спасибо.
-
- Mar 26, 2017
-
- 18
-
- 0
-
- 4,520
- 2
-
#1
The first error I got was “attempted to execute non executable memory”, the second time I didn’t catch what it said, and the third was “page fault in nonpaged area”. What little I could make out other places, they mostly suggest RAM. Kind of what I expected because it mentioned memory. And Tarkov takes A LOT of RAM, so I imagined there was plenty of extra room for error.
I have XMP on but didn’t change anything manually for RAM when overclocking. I honestly barely know what I’m doing with the CPU (safe voltage, temps, …that’s about it), so if there’s a problem with RAM settings I wouldn’t know where to start.
If bad comes to worse I’ll just go back to game boost for my auto overclock, but if I could squeeze out this extra bit of performance it’d be nice. I’ll include pictures of my bios settings…
HERE:
View: https://imgur.com/a/v9QA7u8
I do have mismatched brand/capacity RAM. I know it’s not recommended, but I’ve only had 1 blue screen with normal use in the last 2 years. Other than the last time I tried overclocking.
I posted the exact same as what’s above on reddit and only got one response telling me to take out my 4GB sticks and I’d rather go back to being 99.999% stable on a lower overclock than lose 8GB of RAM.
-
#5
-
- Apr 13, 2016
-
- 890
-
- 57
-
- 5,490
- 208
-
#2
Memory stability is only guaranteed in matched sets sold as matched sets from memory manufacturers. Even different lots may have slightly different electrical characteristics, rendering them incompatible when pushed harder.
Overclocking also decreases said possibilities of stability.
Would recommend returning to less aggressive settings and recheck for stability.
-
- Mar 26, 2017
-
- 18
-
- 0
-
- 4,520
-
- 2
-
#3
-
- Apr 13, 2016
-
- 890
-
- 57
-
- 5,490
- 208
-
#4
-
#5
-
- Mar 26, 2017
-
- 18
-
- 0
-
- 4,520
- 2
-
#6
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
|
Question Preferred overclock method? | Overclocking | 4 | Friday at 2:19 PM |
|
I
|
Question Can’t enable XMP? | Overclocking | 12 | Nov 13, 2022 |
|
S
|
Question cpu fan error after overclock | Overclocking | 0 | Oct 24, 2022 |
|
R
|
Question Memory auto xmp profile 2400mhz DDR3 DRAM voltage 1.515 instead of rated 1.65v? | Overclocking | 3 | Aug 9, 2022 |
|
|
[SOLVED] System instability when GPU Memory is overclocked | Overclocking | 2 | Aug 1, 2022 |
|
R
|
Question DDR3 32gb memory stability testing. Question is it stable? | Overclocking | 3 | Jul 27, 2022 |
|
|
Question MSI Afterburner memory clock stuck | Overclocking | 2 | Jun 5, 2022 |
|
A
|
Question Memory overclock fails after reseating DDR RAM ? | Overclocking | 2 | May 24, 2022 |
|
L
|
[SOLVED] Noob PC builder, XMP turned on to run at 4800 Mhz but actually running at 2400 Mhz | Overclocking | 5 | May 10, 2022 |
|
S
|
[SOLVED] Intel i9 11900K Ram overclock | Overclocking | 12 | Feb 21, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
-
- Mar 26, 2017
-
- 18
-
- 0
-
- 4,520
- 2
-
#1
The first error I got was “attempted to execute non executable memory”, the second time I didn’t catch what it said, and the third was “page fault in nonpaged area”. What little I could make out other places, they mostly suggest RAM. Kind of what I expected because it mentioned memory. And Tarkov takes A LOT of RAM, so I imagined there was plenty of extra room for error.
I have XMP on but didn’t change anything manually for RAM when overclocking. I honestly barely know what I’m doing with the CPU (safe voltage, temps, …that’s about it), so if there’s a problem with RAM settings I wouldn’t know where to start.
If bad comes to worse I’ll just go back to game boost for my auto overclock, but if I could squeeze out this extra bit of performance it’d be nice. I’ll include pictures of my bios settings…
HERE:
View: https://imgur.com/a/v9QA7u8
I do have mismatched brand/capacity RAM. I know it’s not recommended, but I’ve only had 1 blue screen with normal use in the last 2 years. Other than the last time I tried overclocking.
I posted the exact same as what’s above on reddit and only got one response telling me to take out my 4GB sticks and I’d rather go back to being 99.999% stable on a lower overclock than lose 8GB of RAM.
-
#5
-
- Apr 13, 2016
-
- 890
-
- 57
-
- 5,490
- 208
-
#2
Memory stability is only guaranteed in matched sets sold as matched sets from memory manufacturers. Even different lots may have slightly different electrical characteristics, rendering them incompatible when pushed harder.
Overclocking also decreases said possibilities of stability.
Would recommend returning to less aggressive settings and recheck for stability.
-
- Mar 26, 2017
-
- 18
-
- 0
-
- 4,520
- 2
-
#3
-
- Apr 13, 2016
-
- 890
-
- 57
-
- 5,490
- 208
-
#4
-
#5
-
- Mar 26, 2017
-
- 18
-
- 0
-
- 4,520
-
- 2
-
#6
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
|
Question Preferred overclock method? | Overclocking | 4 | Friday at 2:19 PM |
|
I
|
Question Can’t enable XMP? | Overclocking | 12 | Nov 13, 2022 |
|
S
|
Question cpu fan error after overclock | Overclocking | 0 | Oct 24, 2022 |
|
R
|
Question Memory auto xmp profile 2400mhz DDR3 DRAM voltage 1.515 instead of rated 1.65v? | Overclocking | 3 | Aug 9, 2022 |
|
|
[SOLVED] System instability when GPU Memory is overclocked | Overclocking | 2 | Aug 1, 2022 |
|
R
|
Question DDR3 32gb memory stability testing. Question is it stable? | Overclocking | 3 | Jul 27, 2022 |
|
|
Question MSI Afterburner memory clock stuck | Overclocking | 2 | Jun 5, 2022 |
|
A
|
Question Memory overclock fails after reseating DDR RAM ? | Overclocking | 2 | May 24, 2022 |
|
L
|
[SOLVED] Noob PC builder, XMP turned on to run at 4800 Mhz but actually running at 2400 Mhz | Overclocking | 5 | May 10, 2022 |
|
S
|
[SOLVED] Intel i9 11900K Ram overclock | Overclocking | 12 | Feb 21, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics