Ошибка при записи загрузчика usbasp

Google is your friend!!!
Apparently this is a known regression bug not yet corrected. The possible solution is also suggested there by user rigelinorion and here is the quote:

Hello, I solved it this way...

Open for edit the file C:Program FilesArduinohardwarearduinoavrplatforms.txt
this is standard section uploader/programmers tools

#==============================================================================
tools.avrdude.cmd.path={runtime.ide.path}/hardware/tools/avr/bin/avrdude
tools.avrdude.config.path={runtime.ide.path}/hardware/tools/avr/etc/avrdude.conf
tools.avrdude.cmd.path.linux={runtime.ide.path}/hardware/tools/avrdude
tools.avrdude.config.path.linux={runtime.ide.path}/hardware/tools/avrdude.conf

tools.avrdude.upload.params.verbose=-v -v -v -v
tools.avrdude.upload.params.quiet=-q -q
tools.avrdude.upload.pattern="{cmd.path}" "-C{config.path}" {upload.verbose} -p{build.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} -D "-Uflash:w:{build.path}/{build.project_name}.hex:i"

tools.avrdude.program.params.verbose=-v -v -v -v
tools.avrdude.program.params.quiet=-q -q
tools.avrdude.program.pattern="{cmd.path}" "-C{config.path}" {program.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{build.path}/{build.project_name}.hex:i"

tools.avrdude.erase.params.verbose=-v -v -v -v
tools.avrdude.erase.params.quiet=-q -q
tools.avrdude.erase.pattern="{cmd.path}" "-C{config.path}" {erase.verbose} -p{build.mcu} -c{protocol} {program.extra_params} -e -Uefuse:w:{bootloader.extended_fuses}:m -Ulock:w:{bootloader.unlock_bits}:m -Uhfuse:w:{bootloader.high_fuses}:m -Ulfuse:w:{bootloader.low_fuses}:m

tools.avrdude.bootloader.params.verbose=-v -v -v -v
tools.avrdude.bootloader.params.quiet=-q -q
tools.avrdude.bootloader.pattern="{cmd.path}" "-C{config.path}" {bootloader.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{runtime.ide.path}/hardware/arduino/avr/bootloaders/{bootloader.file}:i" -Ulock:w:{bootloader.lock_bits}:m
#==============================================================================

create a new tool called, for example, avrdude1
simply copy section tools.avrdude and name it tools.avrdude1
the trick is that we remove switch "-Uefuse:w:{bootloader.extended_fuses}:m" from "tools.avrdude1.erase.pattern="

#=============================================================================
tools.avrdude1.cmd.path={runtime.ide.path}/hardware/tools/avr/bin/avrdude
tools.avrdude1.config.path={runtime.ide.path}/hardware/tools/avr/etc/avrdude.conf
tools.avrdude1.cmd.path.linux={runtime.ide.path}/hardware/tools/avrdude
tools.avrdude1.config.path.linux={runtime.ide.path}/hardware/tools/avrdude.conf

tools.avrdude1.upload.params.verbose=-v -v -v -v
tools.avrdude1.upload.params.quiet=-q -q
tools.avrdude1.upload.pattern="{cmd.path}" "-C{config.path}" {upload.verbose} -p{build.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} -D "-Uflash:w:{build.path}/{build.project_name}.hex:i"

tools.avrdude1.program.params.verbose=-v -v -v -v
tools.avrdude1.program.params.quiet=-q -q
tools.avrdude1.program.pattern="{cmd.path}" "-C{config.path}" {program.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{build.path}/{build.project_name}.hex:i"

tools.avrdude1.erase.params.verbose=-v -v -v -v
tools.avrdude1.erase.params.quiet=-q -q

#this line was edited
tools.avrdude1.erase.pattern="{cmd.path}" "-C{config.path}" {erase.verbose} -p{build.mcu} -c{protocol} {program.extra_params} -e -Ulock:w:{bootloader.unlock_bits}:m -Uhfuse:w:{bootloader.high_fuses}:m -Ulfuse:w:{bootloader.low_fuses}:m

tools.avrdude1.bootloader.params.verbose=-v -v -v -v
tools.avrdude1.bootloader.params.quiet=-q -q
tools.avrdude1.bootloader.pattern="{cmd.path}" "-C{config.path}" {bootloader.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{runtime.ide.path}/hardware/arduino/avr/bootloaders/{bootloader.file}:i" -Ulock:w:{bootloader.lock_bits}:m
#==============================================================================

Here is an example of the use of the tool avrdude1 in boards.txt file

atmega8.name=ATmega8 OPTIBOOT
atmega8.upload.protocol=arduino
atmega8.upload.maximum_size=7168
atmega8.upload.speed=115200
atmega8.upload.tool=avrdude1
atmega8.bootloader.low_fuses=0xbf
atmega8.bootloader.high_fuses=0xCC
atmega8.bootloader.path=atmega8
atmega8.bootloader.file=optiboot/optiboot_atmega8.hex
atmega8.bootloader.unlock_bits=0x3F
atmega8.bootloader.lock_bits=0x0F
atmega8.bootloader.tool=avrdude1
atmega8.build.mcu=atmega8
atmega8.build.f_cpu=16000000L
atmega8.build.core=arduino
atmega8.build.variant=standard

answered Nov 25, 2015 at 13:10

Google is your friend!!!
Apparently this is a known regression bug not yet corrected. The possible solution is also suggested there by user rigelinorion and here is the quote:

Hello, I solved it this way...

Open for edit the file C:Program FilesArduinohardwarearduinoavrplatforms.txt
this is standard section uploader/programmers tools

#==============================================================================
tools.avrdude.cmd.path={runtime.ide.path}/hardware/tools/avr/bin/avrdude
tools.avrdude.config.path={runtime.ide.path}/hardware/tools/avr/etc/avrdude.conf
tools.avrdude.cmd.path.linux={runtime.ide.path}/hardware/tools/avrdude
tools.avrdude.config.path.linux={runtime.ide.path}/hardware/tools/avrdude.conf

tools.avrdude.upload.params.verbose=-v -v -v -v
tools.avrdude.upload.params.quiet=-q -q
tools.avrdude.upload.pattern="{cmd.path}" "-C{config.path}" {upload.verbose} -p{build.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} -D "-Uflash:w:{build.path}/{build.project_name}.hex:i"

tools.avrdude.program.params.verbose=-v -v -v -v
tools.avrdude.program.params.quiet=-q -q
tools.avrdude.program.pattern="{cmd.path}" "-C{config.path}" {program.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{build.path}/{build.project_name}.hex:i"

tools.avrdude.erase.params.verbose=-v -v -v -v
tools.avrdude.erase.params.quiet=-q -q
tools.avrdude.erase.pattern="{cmd.path}" "-C{config.path}" {erase.verbose} -p{build.mcu} -c{protocol} {program.extra_params} -e -Uefuse:w:{bootloader.extended_fuses}:m -Ulock:w:{bootloader.unlock_bits}:m -Uhfuse:w:{bootloader.high_fuses}:m -Ulfuse:w:{bootloader.low_fuses}:m

tools.avrdude.bootloader.params.verbose=-v -v -v -v
tools.avrdude.bootloader.params.quiet=-q -q
tools.avrdude.bootloader.pattern="{cmd.path}" "-C{config.path}" {bootloader.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{runtime.ide.path}/hardware/arduino/avr/bootloaders/{bootloader.file}:i" -Ulock:w:{bootloader.lock_bits}:m
#==============================================================================

create a new tool called, for example, avrdude1
simply copy section tools.avrdude and name it tools.avrdude1
the trick is that we remove switch "-Uefuse:w:{bootloader.extended_fuses}:m" from "tools.avrdude1.erase.pattern="

#=============================================================================
tools.avrdude1.cmd.path={runtime.ide.path}/hardware/tools/avr/bin/avrdude
tools.avrdude1.config.path={runtime.ide.path}/hardware/tools/avr/etc/avrdude.conf
tools.avrdude1.cmd.path.linux={runtime.ide.path}/hardware/tools/avrdude
tools.avrdude1.config.path.linux={runtime.ide.path}/hardware/tools/avrdude.conf

tools.avrdude1.upload.params.verbose=-v -v -v -v
tools.avrdude1.upload.params.quiet=-q -q
tools.avrdude1.upload.pattern="{cmd.path}" "-C{config.path}" {upload.verbose} -p{build.mcu} -c{upload.protocol} -P{serial.port} -b{upload.speed} -D "-Uflash:w:{build.path}/{build.project_name}.hex:i"

tools.avrdude1.program.params.verbose=-v -v -v -v
tools.avrdude1.program.params.quiet=-q -q
tools.avrdude1.program.pattern="{cmd.path}" "-C{config.path}" {program.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{build.path}/{build.project_name}.hex:i"

tools.avrdude1.erase.params.verbose=-v -v -v -v
tools.avrdude1.erase.params.quiet=-q -q

#this line was edited
tools.avrdude1.erase.pattern="{cmd.path}" "-C{config.path}" {erase.verbose} -p{build.mcu} -c{protocol} {program.extra_params} -e -Ulock:w:{bootloader.unlock_bits}:m -Uhfuse:w:{bootloader.high_fuses}:m -Ulfuse:w:{bootloader.low_fuses}:m

tools.avrdude1.bootloader.params.verbose=-v -v -v -v
tools.avrdude1.bootloader.params.quiet=-q -q
tools.avrdude1.bootloader.pattern="{cmd.path}" "-C{config.path}" {bootloader.verbose} -p{build.mcu} -c{protocol} {program.extra_params} "-Uflash:w:{runtime.ide.path}/hardware/arduino/avr/bootloaders/{bootloader.file}:i" -Ulock:w:{bootloader.lock_bits}:m
#==============================================================================

Here is an example of the use of the tool avrdude1 in boards.txt file

atmega8.name=ATmega8 OPTIBOOT
atmega8.upload.protocol=arduino
atmega8.upload.maximum_size=7168
atmega8.upload.speed=115200
atmega8.upload.tool=avrdude1
atmega8.bootloader.low_fuses=0xbf
atmega8.bootloader.high_fuses=0xCC
atmega8.bootloader.path=atmega8
atmega8.bootloader.file=optiboot/optiboot_atmega8.hex
atmega8.bootloader.unlock_bits=0x3F
atmega8.bootloader.lock_bits=0x0F
atmega8.bootloader.tool=avrdude1
atmega8.build.mcu=atmega8
atmega8.build.f_cpu=16000000L
atmega8.build.core=arduino
atmega8.build.variant=standard

answered Nov 25, 2015 at 13:10

3D printer VALLY TODAY Нужно ли вносить исправления?

Доброго времени суток всем кто первый раз натыкается на меня и тем кто устал уже подсказвать)По вашим советам(которых к слову было ооочень много) созд…

Принтер сжигает блоки питания

Всем привет. У меня anet E2. Не понятно с чего, начал жечь блоки питания. Умирают они с хлопком. Что именно в них горит, пока не смотрел. происходит в…

нужна консультация

Решаю купить принтер, думаю но пока не решил какую выбрать конструкцию. На али нашел вот такой вариант ru.aliexpress.com/item/2016-Newest-TEVO-Tarant…