Ошибка file not found kontakt

1. Everyone’s doing it!

   Here are the steps:

   «File Not Found. Please Make Sure That External Drives Are Connected»

   (Yes, they are)

   Well, let’s just go to «Files» on the toolbar in Kontakt and find the file I used successfully just yesterday. Oh, look:

   «This patch is encrypted and cannot be loaded unless the respective Library is registered properly.»

   Okay, I’m ready. Lay it on me. What’s wrong with this picture? I registered this library when I bought it.

   I realize I am not the only person posting this question, but wherever I bump into it I don’t find a clear, step-by-step process that will lead me out of the woods.

   I will do whatever it takes. I just don’t want go through this again.

2. Which library is in question?

   Simply go to Libraries tab and press Add Library, then browse to its location on the external folder, and add it again. Enter the serial if needed. See what happens.

3. Hi, I’m doing that, more or less. SonicCouture has a bit more involved process that they suggest for (re) installation & I am about to follow their suggestion on that.

   They mention Kontakt having a bug that occasionally disables a given library. Have you heard of this?

   To fill in the story, Konkrete was installed — by me — in Quick Load, and I can still see the instruments, etc. in that location. They just won’t load. I get the error message instead.

   Thanks for your input.

4. NI Technical Support got back to me by directing me to this from its «Knowledge Base»

   http://www.native-instruments.com/e…-the-patch-is-encrypted-and-cannot-be-loaded/

   But the advice when followed does not work & I still get the «File Not Found» message.

   SonicCouture gave me similar instructions with a few other cautions («Make Sure You Are Using Stuff It Expander» / «Make sure you are using Kontakt in Standalone Mode»). I downloaded a new version of Konkrete, copied it to my external hard-drive, located it from the «Add Library » part of Kontakt.

   The error message continues. Still no go.

   I have restarted my computer.

   Advice?

5. What happens if you load Konkrete from the Libraries tab? If that works, then my advice would be to remove the Konkrete library from your Quick-Load then add it there again. Path references probably got messed up.

6. Error message:

   Kontakt 5

   No Library Found

7. That’s what happens when I try to load it as library from Kontakt.

   Did you mean to say «If it DOESN’T work, then my advice would be to remove the Konkrete library from your Quick-Load then add it there again. Path references probably got messed up.

8. I meant — if loading from Libraries tab works, then delete then re-add the lib to Quick-Load. But, since it doesn’t, I would suggest reinstalling. I would also try to install the library on a different hard drive, if possible.

9. I was just searching online for instructions to delete a library from Kontakt quick-load & everywhere else it might be hidden, as preparation to re-install. I happened to see an exchange between you & another user on this topic, but I didn’t see specific instructions for deletion.

   When I try to drag files out of Quick Load to the trash it has no effect.

   How would you go about getting rid of the existing Konkrete files to assure no confusion when I reinstall?

   Thanks.

10. Deleting files from Quick-Load won’t delete the library (it deletes only the files that reference the NKIs from the library). You simply need to delete the library from your hard drive completely.

11. Hi — I’ve deleted the Konkrete library from my hard-drive. And restarted the computer. The Konkrete files are gone from my hard-drive (as you’d expect), but they appear, still, in Quick Load.

    This is the same syndrome reported by another user some time back (in the days of Kontakt 4), who reported it quite difficult to eradicate traces of these files.

    Can you walk me through the necessary steps, please, to strip out all traces, so I may begin again? Much appreciated.

    I’m also curious if you have any intel about the «Bug» that Sonic Couture is saying is an NI problem. I don’t know if you can speak freely about this, but of course I’m curious as I’d like to avoid this issue in the future if there are cautions I can employ. Of if there’s a fix on the way.

12. Quick-Load is a completely SEPARATE entity from the actual library (it’s really just shortcuts to the actual NKI files on your hard drive). Now that you’ve deleted the library from your hard drive, you can remove the Quick-Load entry for Konkrete.

    And yes, there are reports about some missing libraries even in the latest version of Kontakt (5.3.1) — even though that was supposedly fixed in a previous version. Seems like the culprit for this is elsewhere this time around. NI is looking into it.

13. Re:

    «you can remove the Quick-Load entry for Konkrete»

    How?

    Dragging it to the trash has no effect.

14. Right-click on the folder, Delete from Quick-Load.

15. That works with any given instance.

    However, when I open any other project in Logic that I created with Konkrete, Konkrete shows up in «Quick Load,» where I installed it.

    I have deleted Konkrete from my external hard—drive, from my downloads folder, and from Kontakt in Standalone mode.

    Perhaps I need to go through every single project & delete it individually, to avoid any signal-path confusion when I re-install Konkrete.

    Do I?

    Or is there another way to scrub all instances of Konkrete before proceeding with a re-install?

    I don’t know if you can answer this, but of course I am wondering if there any measures I can take to prevent this happening again.

    Thx

    Clark

16. Okay, I’m out of the weeds. I got more instruction from Sonic Couture (they thought I could ignore the data planted in the QuickLoad folder, and they seem to have been correct).

    With a re-install, I now have Konkrete showing up reliably. And I did not have to re-enter my serial number, which was unexpected ease.

    I am now nervous about moving the Konkrete folder to my external hard-drive, where I prefer it to be. Do you have any thoughts about that? I don’t want to break what’s fixed.

17. After you move the Konkrete folder to your external drive, the next time you load Kontakt you will have to go to the Libraries tab, and for Konkrete you will see a «Locate» button. Click it, then browse to the Konkrete folder on your external drive, and all should be good then.

Как добавить библиотеку в Контакт через Add
Автор: depeche1976

Как добавить абсолютно любую библиотеку через вкладку «Add Library»
Автор: Andron1991Rus

Это видеоурок, в котором я говорю и показываю как собственно добавить абсолютно любую библиотеку через вкладку «Add Library» в сэмлере Kontakt 5. Так вот, раньше когда мы пытались добавить библиотеку через эту вкладку, всех нас всегда раздражала надпись: «No Library Found», в переводе: Библиотека не найдена, и чтобы воспользоваться библиотекой, нам приходилось либо перетаскивать файлы-инструменты в формате NKI, NKC, NKX в главное окно контакта, либо через вкладку Files искать её, проводить путь к и только тогда использовать, что очень не комфортно. И тут у меня возник вопрос, а что если попытаться всё же добиться того, чтобы можно было любую библиотеку использовать с комфортом и удобством, добавляя каждую библиотеку через вкладку «Add Library» без всяких проблем и потраченных нервов. Этот видео-урок создан для тех кто хочет комфортно пользоваться любыми библиотека для всеми любимого сэмплера Kontakt 5. Всем приятного просмотра!

Скачать видеоурок в хорошем качестве с полезными файлами вы можете пройдя по этой ссылке.

Как добавить библиотеку в Kontakt 5.
Автор: Mikhail Grudinin

Архив с файлами
Если библиотека пишет Demo или patch is encrypted: 1. попробуйте переустановить Kontakt или обновить Service Center

Как добавить библиотеку в Kontakt 5. Второй способ

Как добавить библиотеку в Kontakt 5 — самый удобный способ. NicntGenerator и Nicnt Changer

Добавление сторонних библиотек в Kontakt. Theok Yamaha Pacifica
Автор: Михаил «Styx» Грудинин

Источник

How to add libraries to Kontakt and fix the library not found error

I get a lot of questions when it comes to adding libraries to Kontakt.

Especially for those who first learned of Kontakt through the Kontakt Player.

Any libraries made for Kontakt Player show up or can be added to the library tab so they show up on the left side of Kontakt.

However there are TONS of Kontakt format libraries that are not licensed specifically for the player, these libraries cannot be added to the library tab….officially.

So I wanted to make a quick video showing how to organize other Kontakt libraries that you can’t add to the library tab so that you can still quickly access them.

Hopefully this helps you out, let me know if you have any questions!

Related Posts

Roland JX-8P Model Expansion on the Fantom-06 Keyboard

Free MPC Sample Edit & Chopping Course

I Built a Silent 12-Core PC with 128GB of Ram!

thanks man, i was just lookin smth about this this morning!

Nice man, glad to help!

THANKS A MILLLION. this has been an issue for a long time and I just gave up on Kontakt! Good lookin G!

good stuff fam, thanks for the comment!

anytime fam…keep da good stuff comin! Question…know of any good hip hop fxb for sylenth1?

No doubt fam, that’s what’s up. Not sure about the question though I don’t have Sylenth.

Whaaaaaaaaaaaaaaaaaa. Not a fan.

Just never got it lol, people say it’s nice but I never got into it 🙂

i’d love to see ya review it….so far its pretty sweet…its got a real high quality sound and TONS of fxb (expansions)

Heard good things about it, people dig it!

This is tremendously helpful! Thank you!!

Cool fam glad to help!

SJ: Thanks for this tutorial. “My error has been solved”.

Cool, glad to help

Another method is to just copy the folder containing library that isn’t found inside of another library that is licensed. Then they show up under that library.

I usually just put them in my default Kontakt Library folder, and they show up!

Yep, I’m just very particular, I don’t like dissimilar libraries showing up under the same product LOL. But I do take products from the same company and do that 🙂

what up man this is Hasznone from the Maschine Family once again you are the cat in the Kontakt/Native Instruments hat another long awaited Jewel!! Definitely something I’ve always wondered about, thanks again for the perfected workflow tip!

No doubt fam glad to help!

This have been very useful. It simplifies the workflow. I have another problem that I find cumbersome to deal with: is there a quick way to unload a multi? The only way I have found so far is to kill all its loaded elements.

Go to the file menu at the top, and click “reset multi”

I’m gonna love this even more now man thanks a lot

Yeah fam glad to help!

I’ve purchased Modern billboard library from Studiolinkedvst and when i load it up in my Kontakt 5 free player, it shows up as a demo. Can you help me out with that problem?

You need the full version of Kontakt to use that library, it’s not a Kontakt player library it will always put Kontakt into demo mode for 30 minutes.

Thank you so munch we been doing this for about a week and half, keep getting the error no library found , I’ll try this later I’m so glad I found. You, you are the best. Thank you

I’m using K5 and I need to re-add a few libraries such as K4 every time it loads up, any suggestion how i can make it stay? thx!

Your libraries should stay put however you don’t need the k4 library in k5 as k5 library has the same instruments. Any reason you are using the k4 library?

Hey I have a question. I have the Colossus Library Files that I understand you have to load into Kontakt? I have Kontakt 5 as a Stand-Alone as well as a Plugin for FL Studio. When I try to load one of the instruments into Kontakt it gives me “This patch cannot be loaded! Make sure that the original library is properly activated.” I’ve tried a bunch of different things, still cant seem to figure it out. Any help brotha?

Did you activate the library?

I’m getting the same library error even when I installed and activated Session Horns in Kontact 5.1. Any suggestions?

make sure you’re adding the folder with the instruments in it

install “NI service center 2.3.2” this fix that issue…

Here’s the fix from Native Instruments that finally worked for m
e.

In order to solve this problem, you must completely uninstall and reinstall
the [NI LIBRARY] including all installation information.

*Please disable any anti-virus, spy-ware protection, and/or any other Internet
security software before proceeding. It is important that the Registry in Windows
(XP/Vista/ 7) is accessible by installers and uninstallers. Without this the
inability to resolve the issue will occur.

Please proceed to uninstall via the Add/Remove Programs control panel (Windows XP)
or the Programs and Features (Vista / 7) from the Control Panel. You must also
deactivate the User Account Control in Windows Vista / 7 (32bit/64bit).
Deactivating UAC is quite easy, here’s what you need to do:

Windows 7 (32/64-bit)
* Go to the START Menu, type “UAC” in the START SEARCH and press enter. You
will see in the search results “Change User Account Control settings”.

* Click “Change User Account Control Settings”.

* You will see a graphical ‘slider’. Manually click and drag the ‘virtual
slider’ all the way down to the ‘Never Notify’ setting and click on OK (button).

* You can now close the User Accounts home page. You need to reboot the
computer for changes to apply.

(Note that you can re-enable UAC by manually click and drag the ‘virtual slider
back to the ‘Default’ setting (second position from the top) and click on OK (button).

In some more difficult cases, you may the need to manually remove files from the
Registry in Windows. This can be done with the Registry Editor as follows:

*Please note that the Registry is in many ways the backbone of the system. Please
be careful to not delete any files that are not mentioned here. You may render
your operating system useless. This will result in a re-installation of Windows
from scratch.

* *1.Open the Registry Editor.
The most common and quickest way to launch this application is press the WINDOWS
button (aka Start Menu/ Windows Logo button) and the letter “R” on your keyboard.
This will open the “RUN” command tool. In the open field, here you type “regedit”
(without the quotes) and press ENTER.

(Alternatively you can click on the Start menu and then: (XP) click on “RUN”_
OR_(VISTA / 7) in the Start Search; please type ‘regedit’ here.)

* *2.Find and Delete an entry.

Windows Vista/ 7 (64-bit)
Please expand the folders until you reach the folder in question at both of the
following locations:

01. HKEY_LOCAL_MACHINESOFTWARENative Instruments**APPLICATION NAME HERE**

02. HKEY_LOCAL_MACHINESOFTWAREWow6432NodeNative Instruments**APPLICATION NAME
HERE**

(If you have the right folder selected [highlighted folder name] when the bottom
of the window reads:

01. HKEY_LOCAL_MACHINESOFTWARENative Instruments**APPLICATION NAME HERE**

02. HKEY_LOCAL_MACHINESOFTWAREWow6432NodeNative Instruments**APPLICATION NAME
HERE**

Please right click on folder to get the “Delete” option. Select the “Delete”
function. When prompted with “Are you sure you want to permanently delete this key
and all of its subkeys?” Please select Yes.

Please then reinstall from the original installer DVD. Remember to update to the
latest version of the software. You can download and install the latest update
that is available in our Update Manager (either in the Service Center or on our
website: http://www.native-instruments.com).

That’s crazy, shouldn’t even need to do all that especially for their own libraries. That’s wild man smh.

Wow! This helped me solve my issue but not by following those steps…. I just ran Kontakt as Administrator and readded the library. They show up every time now even without running as admin again. So simple!

Cool. This video is dealing with “non” Kontkat PLayer libraries, the ones that don’t show on the left in the browser. But glad you got your stuff working!

anyone have any good leads on where to obtain creative commons or public domain voice samples (via the internet), like from speeches, old movies or what have you..any help would be greatly appreciated..

Источник

Adblock
detector