Ошибка f162 wmf 1200

Индикатор обслуживания + все индикаторы — Дефекты датчика термоблока Невозможно распознавание заварного механизма
Индикатор обслуживания + индикатор чиски гидросистемы — Машина очень горячая для чистки гидросистемы
Индикатор обслуживания + индикатор чиски от накипи — Машина очень горячая для чистки от накипи
Индикатор обслуживания + индикаторы обслуживания (налить воды, засыпать кофе, убрать поддон — Машина очень горячая для промывки

Модели S/X/XS

Ошибка 1 — Датчик температуры нагрева воды, короткое замыкание
Ошибка 2 — Датчик температуры нагрева кофе, сломан
Ошибка 3 — Датчик температуры нагрева пара, короткое замыкание
Ошибка 4 — Датчик температуры нагрева на пар, сломан
Ошибка 5 — Машина слишком холодная, нет нагрева пароблока
Ошибка 6 — Невозможно распознать пара клапан
Ошибка 8 — Неисправен заварной механизм

Модели F/XF/E80

Ошибка 1 — Датчик температуры нагрева, поврежден
Ошибка 5 — Нагрев невозможен
Ошибка 8 — Неисправен заварной механизм

Модели J/Z

Ошибка 1 — Датчик температуры нагрева воды, короткое замыкание
Ошибка 2 — Датчик температуры нагрева кофе, сломан
Ошибка 3 — Датчик температуры нагрева пара, короткое замыкание
Ошибка 4 — Датчик температуры нагрева на пар, сломан
Ошибка 5 — Машина слишком холодная, нет нагрева пароблока
Ошибка 6 — Невозможно распознать пара клапан
Ошибка 7 — Невозможно перемещение мультиклапана
Ошибка 8 — Неисправен заварной механизм

Модели X7/X9

Ошибка 0 — Энкодер
Ошибка 1 — Датчик температуры нагрева воды, короткое замыкание
Ошибка 2 — Датчик температуры нагрева кофе, сломан
Ошибка 3 — Датчик температуры нагрева пара, короткое замыкание
Ошибка 4 — Датчик температуры нагрева на пар, сломан
Ошибка 5 — Машина слишком холодная, нет нагрева пароблока
Ошибка 6 — Невозможно распознать пара клапан
Ошибка 7 — Невозможно перемещение мультиклапана
Ошибка 8 — Неисправен заварной механизм

coffee wakes up the world
Service manual
Coffee Machine
English
Series 1200 Edition 06.2012
Table of contents
1
Initial operation
2
Overview machine software
2.1Menu
2.2 Set cup volumes
2.3 Change recipes
2.4 Set grinding degree at Espresso grinder (Perfect extraction)
2.5 Basic settings
2.6Counters
2.7Information
2.8Care
2.9 Overview special features and settings
3
Settings via Servicetool
4
Important Information
4.1 Idle current grinder
4.2 Grinder setting
4.3Depressurization
4.4 Replacing steam boiler
4.5 Replacing hot water boiler
4.6 Check and set pressure reducer
4.7 Descaling, Filter replacement, Filter rinsing
5
6
6
6
7
7
7
8
8
10
10
10
11
11
11
11
Error messages and events
5.1 Display messages
5.2 Error list
6
Milk nozzles
7
Maintenance concepts
7.1 Maintenance sets
2
12
14
17
WMF 1200 S Service manual edition 06/2012
WMF 1200 S Service Manual
1
Initial operation
During the initial operation the steam boiler respectively
the hot water boiler is filled automatically according to the
procedure described as follows.
Machines with steam boiler and hot water boiler:
The steam boiler is filled from the hot water boiler via the
steam boiler supply valve. The steam boiler supply valve is
opened until the steam boiler electrode is contacted. Then
the machine is heated up.
Machines with only hot water boiler:
As the level of these machines can not be detected, the
hot water boiler is filled for 300 s. The waste water is led
into the drip tray via the release valve. If the first filling
up is interrupted, it will be restarted by switching ON the
machine.
Condition
Machine is reset to customer setup
™™ Perform the display-guided setup.
The following is set:
• language, switch off time, time, date
• filter capacity, replacement mode (customer or
service)
• self-service mode
™™ If necessary update software to latest version
(Servicetool required)
™™ Perform portioner calibration (Servicetool required)
™™ Adjust boiler temperature and beverages according to
customer specifications
™™ Afterwards a test brewing is made
Before regular operation:
™™ rinse the pipes, dispense three cups of hot water
™™ perform the cleaning cycle
After setup, the service technician must note the
following statement in the assembly invoice:
“At the end of operation, had to be turned off at source.
The user manual and accessories were given to the
customer.”
The customer must acknowledge this by his signature.
WMF 1200 S Service manual edition 06/2012
3
WMF 1200 S Service Manual
2
Overview machine software
2.1Menu
Enter the submenü:
™™ Briefly touch P , then press +/- button.
select program
browse: -/+
cup volumes
OK: P
browse: -/+
change recipes
OK: P
change: -/+
set grinding degree
OK: P
browse: -/+
cup volumes
select beverage
water volume: 37 ml
OK: P
change: -/+
brewing test
test grinding degree
ground coffee: 86%
OK: P
change: -/+
min.
foam volume:
14sec
OK: P test: beverage
grinding degree OK
test: P
end: C
Beverage button
cup volume: 100%
OK: P test: beverage
pressure
max.
macch. pause: 20sec
OK: P
change: -/+
milk volume: 14sec
OK: P
change: -/+
first coffee
OK: P
change: -/+
preinfusion: on
OK: P
change: -/+
4
WMF 1200 S Service manual edition 06/2012
WMF 1200 S Service Manual
basic settings
OK: P
browse: -/+
language: english
OK: P
change: -/+
sw. off time: 0min
OK: P
change: -/+
switch on time: off
OK: P
change: -/+
OK: P
counters
browse: -/+
espresso 269
browse: -/+
etc. all beverages
reset all counters?
No: C
Yes: P
information
OK: P
browse: -/+
V0.0x dd.mm.yyyy
browse: -/+
WMF 1200S Basic
browse: -/+
serial no. ######
browse: -/+
foam quality 100%
OK: P
change: -/+
prod. date: mm.yyyy
browse: -/+
topping quality xxx
OK: P
change: -/+
idle current gr#:##
browse: -/+
ECO-mode: 0
OK: P
change: -/+
boiler temp.:
96°C
OK: P
change: -/+
office functions
OK: P
change: -/+
time
OK: P
hh:mm:ss
change: -/+
date
OK: P
dd.mm.yyyy
change: -/+
date / time: off
OK: P
change: -/+
water filter:
no
OK: P
change: -/+
water hardn.: 20
OK: P
change: -/+
audio signal:
on
OK: P
change: -/+
SB mode: no
OK: P
change: -/+
display contrast
OK: P
change: -/+
backup: no
OK: P
change: -/+
change PIN
OK: P
change: -/+
WMF 1200 S Service manual edition 06/2012
5
WMF 1200 S Service Manual
2.2
Set cup volumes
cup volumes
OK:P
browse: +/-
2.3
Change recipes
change recipes
OK:P
browse: +/-
•
•
•
•
•
•
Adjust: +/- button
Test beverage: beverage button
Save: P button
Adjust: +/- button
Test beverage: beverage button
Save: P button
Water volume
Ground coffee
Preinfusion
Milk volume
Foam volume
etc.
2.4
Set grinding degree at Espresso
grinder (Perfect extraction)
set grinding degree
OK:P
browse: +/-
6
The brewing pressure changes with changing
the grinder degree setting.
The setting is correct if the brewing pressure
is indicated between 2/3 and 3/4 on the bar
during the test brewing.
WMF 1200 S Service manual edition 06/2012
WMF 1200 S Service Manual
2.5
Basic settings
basic settings
OK:P
browse: +/-
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
•
Language
Switch off time
Switch on time
Milk foam quality (optional)
Topping quality (optional)
ECO-mode
Boiler temperature
Office functions
Time
Date
Date / time (display)
Water filter
Water hardness
Audio signal
SB mode (self-service mode)
Display contrast
Backup
Change PIN
2.6Counters
counters
OK:P
browse: +/-
You can display the number of beverages
prepared here. The beverage counter can be
reset.
2.7Information
information
OK:P
browse: +/•
•
•
•
•
Software version
Machine name
Machine number
Date of production
Idle current (grinders)
WMF 1200 S Service manual edition 06/2012
7
WMF 1200 S Service Manual
2.8Care
The following procedures can be made via the care pad:
• Cleaning program
• Milk system rinsing
• Mixer rinsing
• Filter change
• Descaling
• Customer check up
• Brewing unit change
2.9
Overview special features and settings
Free flow milk foam dispensing
Milk foam can be added by pressing the C-button.
Warm-up rinse
Press care pad long.
Barista function
Press the + / - button briefly: beverage can be
preselected „strong“ or „mild“.
S-M-L-Function
Press the + / - button long: beverage can be
preselected „big“ or „small“.
Milk foam quality
Milk foam quality can be adjusted in the basic
settings.
2nd beverage level
2nd beverage level can be activated via basic
settings / office functions. Beverages on the 2nd
level are activated with double click.
Deactivate milk beverages
Milk beverages can be activated / deactivated via
basic settings / office functions.
Weigh grounds
Ground coffee can be tested:
Empty grounds container, select beverage,
interrupt it by pressing C button after grinding.
Idle current grinder
Idle current for grinders can be detected at the
machine:
select idle current and press P
Information w button for 2 s (therefore the grinder has to be
empty).
Backup
The technician saves the data in a data backup. It
can be copied again into the working memory.
8
WMF 1200 S Service manual edition 06/2012
WMF 1200 S Service Manual
3
Settings via Servicetool
The follwing settings can only be made via Servicetool
• Change button allocation / beverage names
• Enter or reset Service maintenance 1, Service
maintenance 2, Mixer maintenance and Revision
• Adjust machine configuration (e.g. activate grounds
disposal through counter)
• Test components
For more further details see Training manual Servicetool
WMF 1200 S Service manual edition 06/2012
9
WMF 1200 S Service Manual
4
Important Information
4.1
Idle current grinder
The idle current has to be detected again having replaced
the grinder, grinder disks or grinder motor.
Important: the grinder has to be completely empty.
Press the unlighted „P-button“ in the machine program
under Information / Idle current for 3 seconds. Thus the
hidden routine for idle current detection is started.
4.2
Grinder setting
Grinding degree setting
The grinder must be removed. The setting-wheel (with
worm gear) is dismantled.
™™ Turn the grinding-disks towards each other until they
join and cannot be turned further by hand on the
driveshaft.
™™ Fit the setting-wheel with the worm gear.
Espresso grinder (right side)
™™ Open the setting-wheel by a total of 10 turns
This setting corresponds to setting no. 1 (espresso)
Cream grinder (left side)
™™ Open the setting-wheel for a total of 18 turns
This setting corresponds to setting no. 5 = cream fineness.
Two turns of the setting-wheel are necessary to adjust
thefineness by one degree.
Machines with only one grinder are set to espresso
fineness.
4.3Depressurization
Before opening the screw connections in the boiler water
system this routine must be run for safety reasons.
Press the unlighted P-button for 3 s in the machine
program under Information/Manufacturer number. Then
insert PIN number (if there is no PIN, press the topmost
beverage button, this corresponds to „00000“). So the
hidden depressurization routine is started.
™™ Cappuccino valve opens (heating is off) until the
machine gets restarted.
10
WMF 1200 S Service manual edition 06/2012
WMF 1200 S Service Manual
4.4
Replacing steam boiler
The steam boiler is filled from the hot water boiler via the
supply valve having replaced the steam boiler and switched
ON the machine. The supply valve is opened until the
electrode reports “contact”. Then the machine is heated up.
4.5
Replacing hot water boiler
The hot water boiler is not filled automatically after the
replacement. If the steam boiler electrode got in contact
with water, the steam boiler and hot water boiler would
heat up. Therefore keep the heating unplugged having
replaced the hot water boiler. Then fill up the hot water
boiler via the Servicetool / component test until hot water
runs out of the spout:
• Voltage 24 V OK
• Hot water valve
• Oscillation pump
• machines with constant water supply are equipped with
an additional hot water supply valve
Then unplug the coffee machine mains plug and plug the
hot water boiler mains plug in the CPU.
4.6
Check and set pressure reducer
Press the unlighted P-button for 3 s in the machine
program under Information/Production date. So the hidden
routine for setting the pressure reducer is started.
™™ Remove screw plug on water tank union.
™™ Screw in auxiliary nipple (33.2320.8000) for plug
connector adapter.
™™ Place auxiliary tool on union.
™™ keep the unlighted P-button pressed in the machine
program under Information/Production date. After 3
s the boiler infeed valve opens; Read pressure from
manometer and set to 1.8 bar.
™™ The boiler infeed valve closes again when P-button is
released
™™ Remove setting controller and remove auxiliary nipple.
™™ Replace screw plug.
4.7
Descaling, Filter replacement, Filter
rinsing
Information see User Manual.
WMF 1200 S Service manual edition 06/2012
11
WMF 1200 S Service Manual
5
Error messages and events
5.1
Display messages
Operation messages
refill water tank
Water tank is empty or not inserted.
heating up ...
When temperature in hot water boiler or steam
boiler is too low.
warm rinse
in progress
During automatically (after first heating-up)or
manually warm-up rinse (via rinsing button).
refill beans
left
Idle current at bean hopper left is detected.
refill beans
right
Idle current at bean hopper right is detected.
empty grounds cont.
Grounds container is full
(Default 200 seconds grinding time).
Cleaning messages
12
replace brewing
unit
Brewing unit not detected after closing the door
or reinserting the grounds container.
empty drip tray
Displayed after switching machine on: machines
without drain connection and after cleaning
with switching off.
WMF 1200 S Service manual edition 06/2012
WMF 1200 S Service Manual
Maintenance and Care messages
Customer check-up
Service maintenance 1
Service maintenance 2
Revision
Mixer maintenance
Replace water filter
Descale machine
WMF 1200 S Service manual edition 06/2012
After 15.000 brewings
After 1 year
After 2 years
After 6 years
After 6.000 beverages
Replace the water filter (machines with constant
water supply and tank)
Carry out machine descaling.
13
WMF 1200 S Service Manual
Description
Error list
Display
5.2
F2
Brewer without electricity
F5
Brewer shutoff
F6
Brewer over current
F7
Brewer timeout (no electricity)
F26
Portioner 1 current malfunction
F36
Current malfunction Portioner 2
F87
Boiler sensor damaged
F88
boiler excess temperature
F89
boiler heating time
F125
EEprom missing or defective
F126
Front panel / CPU Communication error
F135
Motor driver error (grinder or brewer motor)
F161
flowmeter malfunction during brewing
F162
flowmeter malfunction during cleaning
F163
flowmeter malfunction during checking
F164
flowmeter malfunction during hot water dosage
F165
flowmeter malfunction during choc dosage
F166
F167
flowmeter malfunction during steam boiler
feeding
flowmeter malfunction during descaling
F186
timeout during steam boiler filling
F187
Steam boiler sensor damage
F188
Excess temperature in steam boiler
F189
Heating-time steam boiler
14
WMF 1200 S Service manual edition 06/2012
WMF 1200S
red
3324101000 1,90
lightgreen
3395215000 1,80
WMF 1200 S Service manual edition 06/2012
gray-blue
3370071714 1,20
orange
3395106100 1,15
gray
3395097100 1,10
yellow
3395900100 1,05
black
3395137000 1,00
3320314100 1,70 transparent
3395214000 1,65 honey yellow
caramel
3395213000 1,60
brown
3320315100 1,50
white
3395169000 1,40
green
3323178000 1,30
milk storage temperature (first use one of the nozzle enclosed in the delivery)
low milk
foam temperature
Information: the temperature can be influenced additionally by setting the foam quality (settable in the submenu).
high milk
foam temperature
If the required milk foam temperature can not be achieved, choose another nozzle.
milk foam (first try the nozzles enclosed in the delivery).
2. step: now select the optimal milk nozzle by means of required dispensing temperature of the
low milk storage
temperature
higher milk storage
temperature
blue
3313843100 2,00
x
pink
3324102000 2,10
x
x
x
1. step : determine the adequate milk nozzle (at the milk foamer) first by means of the
purple
3324103000 2,20
Milk nozzles for WMF coffee machines
beige
3320460100 3,00
If no cooler is used /no Plug&Clean
adapter is used, plug on this milk nozzle at
the end of the hose
6
These milk nozzles correspond to the provided milk nozzle in maintenance kits
WMF 1200 S Service Manual
Milk nozzles
15
16
0
15.000
30.000
45.000
60.000
75.000
90.000
105.000
120.000
0
CK
MS1+Brewer
1
MS1
CK
MS1+MS2+Brewer
2
Years
MS1+MS2+Brewer
CK
MS1+Brewer
3
MS1
CK
MS1+MS2+Brewer
4
MS1+MS2+Brewer
CK
MS1
5
30000/Year
15000/Year
7
135.000
150.000
WMF 1200 S Service Manual
Maintenance concepts
WMF 1200 S Service manual edition 06/2012
Brewings
WMF 1200 S Service Manual
7.1
Maintenance sets
Customer check-up kit (CK)
every 15.000 brewings
Service maintenance 1 (MS 1)
once a year (contains customer check-up kit)
Service maintenance 2 (MS 2) every 2 years
Brewer
33.2823.6199
Set Choc
33.2828.6100
Overview maintenance sets
WMF milk system WMF Topping
Venturi
optimized milk
foamer
Topping
2,2 kW
Customer check-up kit 33.2878.3000
33.2878.3000
Service maintenance 1 33.2878.4000
33.2878.4000
Service maintenance 2 33.2878.5000
33.2878.6000
WMF 1200 S Service manual edition 06/2012
17