Ошибка asio sys windows 10

Asio.sys

Ошибки Asio.sys

Синий экран ошибок смерти, или BSOD, обычно встречаются с asio.sys. Эти ошибки «Stop» asio.sys включают в себя:

• «Обнаружена проблема: asio.sys вызвал проблему и завершение работы Windows, чтобы предотвратить повреждение. «
• «: (Windows столкнулась с проблемой с asio.sys и нуждается в перезапуске. «
• «0x0A: IRQL_NOT_LESS_EQUAL — asio.sys»
• 0x0000001E: КМОДЕ_ИСКЛЮЧЕНИЕ_НЕТ_ОБРАБАТЫВАЕТСЯ — asio.sys
• 0x050: СТРАНИЦА_FAULT_IN_NONPAGED_AREA — asio.sys

В большинстве случаев после установки нового оборудования или программного обеспечения возникнут ошибки синего экрана asio.sys. Ошибки asio.sys, связанные с Third-Party Applications, часто возникают во время установки программного обеспечения, связанного с asio.sys, во время завершения работы или запуска Windows или во время загрузки драйвера устройства, связанного с Windows Software Developer. Отслеживание того, когда и где возникает ошибка STOP, является важной информацией при устранении проблемы. Notating при возникновении ошибок asio.sys STOP имеет первостепенное значение для поиска причины проблем, связанных с Third-Party Applications, и сообщая о них за помощью.

Источник ошибок Asio.sys

Ошибки Blue Screen asio.sys часто вызваны связанными проблемами с оборудованием, программным обеспечением, драйвером устройства или прошивкой. Они могут быть связаны либо с программным обеспечением Third-Party Application или аппаратным обеспечением Windows Software Developer, но это не обязательно так.

Более конкретно, данные ошибки asio.sys могут быть вызваны следующими причинами:

• Устаревшие, неправильно настроенные или поврежденные драйверы устройств Third-Party Application.
• Повреждение реестра Windows из-за недавнего изменения программного обеспечения (установка или удаление), связанного с asio.sys.
• Поврежденный и/или зараженный вирусами asio.sys.
• Конфликт оборудования, связанного с установкой оборудования OFWindows Software Developer или asio.sys.
• Установка Third-Party Application или драйверов устройств (asio.sys), вызывающих удаление или повреждение.
• Сбой жесткого диска, связанный с asio.sys Синий экран смерти.
• Поврежденная оперативная память/память из asio.sys Синий экран смерти.

The error “can’t open AsIO.sys” can occur at startup, installing or opening an ASUS utility. If you’re experiencing this error, don’t worry. The tips below may help you fix the error.

What’s AsIO.sys?

AsIO.sys is a driver file that belongs to ASUS. Usually it’s preinstalled on your ASUS computer and installed along with the ASUS motherboard. The error “can’t open AsIO.sys” is one of the common errors that ASUS users have reported. It usually occurs to AURA & AI Suite.

You may encounter this error whenever you start your computer, or when you install AURA or AI Suite. Select one of the links below for the fix depending on your situation.

Fix: If you run into this error when you open AURA or AI Suite
Fix: If you run into this error when you install AURA or AI Suite
Fix: If you run into this error When you start your computer

Fix: If you run into this error when you open AURA or AI Suite

The message “can’t open AsIO.sys” can pop up at opening AURA or AI Suite. To fix the error, you just need to run the utility as administrator.

1) On your keyboard, press the Windows logo key.

2) Type the utility you have the problem with (AURA or AI Suite), and then click on Run as administrator. Then you should be able to open the program.

Fix: If you run into this error when you install AURA or AI Suite

Many users have reported that this error occurs when they install AURA or AI Suite (I, II or III). If you also can’t install AURA or AI Suite due to this error, you can follow these steps to fix it.

1) Right-click on the downloaded file of the utility (the zip file) and select Properties.

2) At the bottom, tick the “Unblock” checkbox, and then click OK to save the changes.

3) Extract the zip file.

4) Open the extracted folder and then locate the file called “AsusSetup.exe”.

5) Right-click on “AsusSetup.exe” and select Run as administrator. Then you should install the utility successfully.

Fix: If you run into this error When you start your computer

If this error message pops up at startup, the ASUS utilities (usually, AURA or AI Suite) could be the culprit.

If you have multiple ASUS utilities installed, to figure out which utility is causing the problem, you can uninstall them one by one then you can determine which one is causing the problem. If you only have one ASUS utility installed, just uninstall it and reinstall it as administrator.

Here’s how to do it:

1) Right-click on the Start menu button and select Apps and Features.

2) Scroll down and select one of the ASUS utilities.

3) Click Uninstall, then the confirmation dialog will pop up, then click Uninstall again.

4) Once the uninstallation is done, restart your computer and check to see if the error still occurs.

If the error still occurs, it means that utility is not the cause. If you have multiple ASUS utilities installed, repeat the steps above until you figure out the one that’s causing the problem.

Once you figure out and uninstall the utility that’s causing the problem, you can reinstall it by following these steps:

a) Right-click on the downloaded file of the utility (.zip file) and select Properties.

b) At the bottom, tick the “Unblock” check box, and then click OK to save the changes.

c) Extract the zip file.

d) Open the extracted folder and locate the file called “AsusSetup.exe”.

e) Right-click on “AsusSetup.exe” and select Run as administrator.

Hopefully you can fix the “Can’t open AsIO.sys” with the above tips. If you have any questions, feel free to drop a comment below. I’ll get back to you ASAP.

1. 08-21-2019 09:04 PM

   
   

   #11

   

   
   ROG Guru: Yellow Belt
   

   Array
   Rewerend PC Specs

   Rewerend PC Specs
   Motherboard	Asus Crosshair V Formula — Z
   Processor	AMD FX-9370
   Memory (part number)	2 x KHX23C11T3K2/8X
   Graphics Card #1	R9 Fury X 4gb Sapphire
   Sound Card	Asus Xonar Phoebus
   Monitor	SAMSUNG U28E590D 28″ uHD + freeSync
   Storage #1	Samsung SSD EVO 540 250Gb
   Storage #2	Seagate 7200.14 2TB
   CPU Cooler	Corsair Hydro H105
   Case	Cooler Master Cosmos II
   Power Supply	ENERMAX ERV1000EWT-G Revolution87+ 1000W Gold
   Keyboard	Microsoft SideWinder X6
   Mouse	Saitek MAD CATZ R.A.T. 7
   Headset	Asus ROG Orion
   Mouse Pad	Steel Series PAD
   Headset/Speakers	Genius Home Theather SW 5.1
   OS	MS Windows 8.1 Pro
   Network Router	Asus RT-N18U
   Accessory #1	Zalman ZM-MFC3 FAN/TEMP CONTROLLER

   ---

   Hey I just fixed that ASio.sys creepy window….fresh install didn�t helped but uninstall all software from AiSuite except DIP5 make it work again without that annoying box…
   I hope that could help others, rest of the SW are not so usefull anyway. But I need AiSuite for my Ryujin 360.

   Cheers.

   ---

2. 01-15-2020 04:11 PM

   
   

   #12

   

   
   New ROGer
   

   Array
   Riverdog64 PC Specs

   Riverdog64 PC Specs
   Motherboard	ASUS ROG Crosshair VII Hero (Wi-Fi) X470
   Processor	AMD Ryzen 7 2700X
   Memory (part number)	CORSAIR VENGEANCEL 16GB (2X 8GB) DDR4 3600
   Graphics Card #1	GIGABYTE Radeon VII 16GB PCI Express
   Sound Card	on-board
   Monitor	ASUS ROG Swift PG278QR 27� Gaming Monitor 1440p 1ms 165Hz DP HDMI G-SYNC
   Storage #1	Samsung SSD 970 PRO 512GB — NVMe M.2
   Storage #2	Seagate BarraCuda 2TB HDD � 3.5 Inch SATA 6Gb/s
   CPU Cooler	Fractal Design Cooler FD-WCU-CELSIUS-S24
   Case	CORSAIR Carbide 270R Mid-Tower Case, Window Side Panel
   Power Supply	CORSAIR RM750x, 750 Watt, 80+ Gold
   Keyboard	Redragon K582-BA Wired Mechanical Gaming Keyboard
   Mouse	Redragon Cobra Gaming Mouse Combo, 10,000DPI
   Mouse Pad	who cares?

   ---

   I found a solution the «Can’t open asio.sys (5) error.
   

   I chalk this up to poor instructions on the ASUS downloads site…

   This error is related to installation of ASUS AI Suite 3 versions before .52 and Windows 10 (as far as I know only Windows 10). I make no guarantees that this will work for you or that there is not another way, but this is what I did to fix the problem.

   When downloading AI Suite, you have to first identify your motherboard. I am not positive if there are different versions of the program for each motherboard, but just in case there are, go through that process to find the Utilities download section for your motherboard.

   There is an updated files that call itself ASUS AI Suite 3 vers. xx.52 but it is only an updater as far as AI Suite is concerned and if you run it on its own, without an earlier version of AI Suite installed already, it only installs two other programs in the suite and not the one used for overclocking.

   In the same Utilities software list, you will find the xx.51 version of AI Suite as well. This has ALL the software. I installed that one first. (be careful… there are several «setup.exe» «AsusSetup.exe» files. I used the «AsusSetup.exe» after I uncompressed the files each time). Afterwards I rebooted and though AI Suite’s overclocking program was not installed (finally), I go the all too familiar ASio.sys (5) can’t be opened or found error.

   THEN I installed the xx.52 version that appears to not be the entire AI Suite 3. After a reboot, this error was gone.

   ---

3. 01-25-2020 04:24 AM

   
   

   #13

   

   
   ROG Guru: Orange Belt
   

   Array
   Braegnok PC Specs

   Braegnok PC Specs
   Motherboard	Asus Crosshair X670E Gene
   Processor	AMD Ryzen 9 7950X
   Memory (part number)	CMT32GX5M2B6000Z30K
   Graphics Card #1	EVGA RTX 3090 Ti FTW3 Ultra
   Monitor	Alienware AW3423DW
   Storage #1	Samsung 990 Pro
   CPU Cooler	Optimus AM5 Foundation
   Case	Asus Prime AP201
   Power Supply	SeaSonic Prime TX-1600
   Keyboard	Das Keyboard 4 Ultimate
   Mouse	G502 Lightspeed
   Headset	SteelSeries Arctis Pro
   OS	Windows 11 Pro

   

   ---

   I was able to fix the can’t open asio.sys (5),.. I’m running Windows 10 64-Bit.

   I used System Restore, and went back to before installing Asus A1 Suite, then installed Ver. 3.00.36 and checked all box’s, after rebooting I had the can’t open asio.sys (5) box,.. then went bask to Asus site and installed the ver 52 update.

   With the first install ( ver .36 ) the EZ Update, and USB BIOS Flashback does not work!,.. that is why I was getting the error at startup, after installing update ver 52 you only have two options to check which is the EZ Update and USB BIOS Flashback, I checked both box’s, installed update,.. and all is good now.

   Hope this helps

   Last edited by Braegnok; 01-25-2020 at 05:43 AM.

   ---

4. 01-26-2020 12:13 AM

   
   

   #14

   

   
   ROG Member
   

   Array
   areserhat PC Specs

   areserhat PC Specs
   Motherboard	Rog Strix X570 E
   Processor	AMD Ryzen 3700x
   Memory (part number)	Kingston 2933MHZ
   Graphics Card #1	Rog StrixRx580
   Monitor	AOC C24G1
   Storage #1	Samsung M2 970 250gb
   Storage #2	Samsung M2 970 Plus 500gb
   CPU Cooler	Rog Ryujin 240
   Case	Corsair Crystal 680x
   Power Supply	Rog Strix 750W PSU
   Keyboard	Corsair K95 RGB Platinium
   Mouse	Rog Gladius Origin
   Headset	Steelseries Arctis 7
   Mouse Pad	Steelseries QCK Prism
   Headset/Speakers	Logitech Z533 White
   OS	Windows 10 Pro
   Accessory #1	Rog Terminal
   Accessory #2	Rog Led Strips

   ---

   
   

   I had this problem before 2 times. Thanks to Asus we are expert on finding a way. Anyway below is my solution which works well.

   Download the latest aura and just install the lightning updates. Probably there is a crash between Ai Suite and Aura drivers.

   Ps. I am now travelling maybe I gave wrong file info when I return back I will update this answer.

   ---

5. 05-23-2020 01:11 PM

   
   

   #15

   

   
   New ROGer
   

   Array

   ---

   Great this worked for me!!
   

   Originally Posted by Riverdog64
   

   I chalk this up to poor instructions on the ASUS downloads site…

   This error is related to installation of ASUS AI Suite 3 versions before .52 and Windows 10 (as far as I know only Windows 10). I make no guarantees that this will work for you or that there is not another way, but this is what I did to fix the problem.

   When downloading AI Suite, you have to first identify your motherboard. I am not positive if there are different versions of the program for each motherboard, but just in case there are, go through that process to find the Utilities download section for your motherboard.

   There is an updated files that call itself ASUS AI Suite 3 vers. xx.52 but it is only an updater as far as AI Suite is concerned and if you run it on its own, without an earlier version of AI Suite installed already, it only installs two other programs in the suite and not the one used for overclocking.

   In the same Utilities software list, you will find the xx.51 version of AI Suite as well. This has ALL the software. I installed that one first. (be careful… there are several «setup.exe» «AsusSetup.exe» files. I used the «AsusSetup.exe» after I uncompressed the files each time). Afterwards I rebooted and though AI Suite’s overclocking program was not installed (finally), I go the all too familiar ASio.sys (5) can’t be opened or found error.

   THEN I installed the xx.52 version that appears to not be the entire AI Suite 3. After a reboot, this error was gone.

   Hi thanks for the post, this worked perfectly for me.

   ---

6. 07-15-2020 07:16 PM

   
   

   #16

   

   
   ROG Junior Member
   

   Array

   ---

   Originally Posted by Riverdog64
   

   I chalk this up to poor instructions on the ASUS downloads site…

   This error is related to installation of ASUS AI Suite 3 versions before .52 and Windows 10 (as far as I know only Windows 10). I make no guarantees that this will work for you or that there is not another way, but this is what I did to fix the problem.

   When downloading AI Suite, you have to first identify your motherboard. I am not positive if there are different versions of the program for each motherboard, but just in case there are, go through that process to find the Utilities download section for your motherboard.

   There is an updated files that call itself ASUS AI Suite 3 vers. xx.52 but it is only an updater as far as AI Suite is concerned and if you run it on its own, without an earlier version of AI Suite installed already, it only installs two other programs in the suite and not the one used for overclocking.

   In the same Utilities software list, you will find the xx.51 version of AI Suite as well. This has ALL the software. I installed that one first. (be careful… there are several «setup.exe» «AsusSetup.exe» files. I used the «AsusSetup.exe» after I uncompressed the files each time). Afterwards I rebooted and though AI Suite’s overclocking program was not installed (finally), I go the all too familiar ASio.sys (5) can’t be opened or found error.

   THEN I installed the xx.52 version that appears to not be the entire AI Suite 3. After a reboot, this error was gone.

   This also worked for me.

   ---

7. 09-07-2020 09:37 AM

   
   

   #17

   

   
   New ROGer
   

   Array
   mguizz PC Specs

   mguizz PC Specs
   Motherboard	ROG STRIX Z390 F GAMING
   Memory (part number)	Corsair Vengeance Pro
   Graphics Card #1	GeForce RTX 2070 SUPER
   Monitor	Dell U2719D

   ---

   I had this issue & fixed it the following way.
   Go to the specific motherboard ‘Driver & Tools’ page & download from ‘Software and Utility’ the latest AI Suite & latest Ez Update (AIS V3.00.51 & EZU v3.00.11 at time of writing) installers.
   Install AI Suite & reboot
   Install Ez Upate

   Hope it works for you, cheers.

   Last edited by mguizz; 09-07-2020 at 09:55 AM.

   ---