Меню

Ошибка 26003 microsoft sql server

hello,

for testing and developing i have installed Microsoft SQL Server 2017 Developer (German) to my computer.

yesterday i decided to upgrade to Microsoft SQL Server 2019 Developer (German). the upgrade to 2019 was successfully, but i thought after an upgrade all old SQL Server 2017 would be removed, but it wasn’t. i still have all the SQL Server
2017 menu entries on start menu and all the old Microsoft SQL Server 2017 Setup entry in the uninstall control panel.

i now tried to uninstall the SQL server 2017 setup but then i get always the warning 26003:

ok, then i tried to uninstall SQL Server 2019 as well and that will show up a very similar warning dialog:

i want to uninstall all SQL Server (2017 & 2019) from my computer to reinstall only SQL Server 2019 — because i don’t have so much diskspace left.

at the moment i am not able to uninstall SQL Server 2019 nor SQL Server 2017.

there are older posts for «solutions» of warning 26003 available, to browse the regitries and remove everything that looks like part of SQL Server, but only for very old SQL Server 2008.
i mean in the meantime there should be a more safe reliable automatic solution available without hacking around…

Источник

RRS feed

  • Remove From My Forums

  • Question

  • I’m getting  above warning message while uninstall SQL Server 2008 R2. I tried some of the online solutions but not able solve it 

    Please make sure explain bit more clear way.Could please help me to solve the issue and Much appreciated. 

    Many Thanks

    Mohan

All replies

  • Hi Kamlesh,

    Actually already  refer the above link, The problem is can’t able to identify the key like below 

    4. Delete the following keys in <g class=»gr_ gr_147 gr-alert gr_spell undefined ContextualSpelling ins-del multiReplace»
    data-gr-id=»147″ id=»147″>regedit</g>:

    —HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server

    —HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServer

    5.  Go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall  and delete all the sub-keys
    referencing SQL Server.

    6.  Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServices and delete all the keys referencing SQL Server.

    Could you please explain some more better way where it is?

    Thanks for your help

Источник

RRS feed

  • Remove From My Forums

  • Question

  • I’m getting  above warning message while uninstall SQL Server 2008 R2. I tried some of the online solutions but not able solve it 

    Please make sure explain bit more clear way.Could please help me to solve the issue and Much appreciated. 

    Many Thanks

    Mohan

All replies

  • Hi Kamlesh,

    Actually already  refer the above link, The problem is can’t able to identify the key like below 

    4. Delete the following keys in <g class=»gr_ gr_147 gr-alert gr_spell undefined ContextualSpelling ins-del multiReplace»
    data-gr-id=»147″ id=»147″>regedit</g>:

    —HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server

    —HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServer

    5.  Go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall  and delete all the sub-keys
    referencing SQL Server.

    6.  Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServices and delete all the keys referencing SQL Server.

    Could you please explain some more better way where it is?

    Thanks for your help

Источник

RRS feed

  • Remove From My Forums

  • Question

  • I’m getting  above warning message while uninstall SQL Server 2008 R2. I tried some of the online solutions but not able solve it 

    Please make sure explain bit more clear way.Could please help me to solve the issue and Much appreciated. 

    Many Thanks

    Mohan

All replies

  • Hi Kamlesh,

    Actually already  refer the above link, The problem is can’t able to identify the key like below 

    4. Delete the following keys in <g class=»gr_ gr_147 gr-alert gr_spell undefined ContextualSpelling ins-del multiReplace»
    data-gr-id=»147″ id=»147″>regedit</g>:

    —HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server

    —HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServer

    5.  Go to HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall  and delete all the sub-keys
    referencing SQL Server.

    6.  Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServices and delete all the keys referencing SQL Server.

    Could you please explain some more better way where it is?

    Thanks for your help

Источник

For many, many weeks I was stuck in SQL Server hell, and almost, nearly, resigned to having to wipe my hard drive clean, in order to get SQL Server to un-install and re-install successfully !!!

SQL Server un-install wizard kept on getting stuck halfway through the un-install process…as it kept asking for, but would refuse to accept, the sqlsupport.msi file, even when pointing to a valid original install location!

Until I found the answer to my woe (amazingly it works… Like a magic charm!)

Solution:
Save a file as “sql.reg” on your desktop with the following text (use copy-paste) shown in italics:

Windows Registry Editor Version 5.00

[HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server100Bootstrap]
“BootstrapDir”=”C:\Program Files\Microsoft SQL Server\100\Setup Bootstrap\”

[HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server100BootstrapSetup]
“PatchLevel”=”10.50.1600.00”

After saving the file to desktop, double click the file and accept the dialog to merge this to your registry.

Then copy the following files from your installation folder to the location :

C:Program FilesMicrosoft SQL Server100Setup BootstrapSQLServer2008R2

Note: If you don’t see these folders just create them with the exact name

What is to be copied:

folder: x64/x86/ia64 (depending on 64bit, 32bit or itanium architecture),

folder: resources

file: setup.exe

Now run setup.exe from your installation folder again. Your fresh installation should begin.

Hopefully this helps you too.

See : Only the good stuff

Источник

Warning 26003 : Uninstall «SQL 2008 R2 Express» (Common Files & Database Engine Shared) Error

One day I was trying to install SQL Server 2008 R2 on
UAT Server, so I could start with clean the previous installation. I uninstalled
previous setup file from control panel.

After rebooting the server, I started fresh
installation of SQL Server 2008 R2. In middle of the installation I got below error.

After investigation come to know
that still some  files of previous
installation are in server.

So while removing the files from
control files got below error. I was not able to remove the installation files
from control panel.

Below is the solution for this
error.

Uninstall an existing SQL Server 2008 R2 instance, try the
following steps:

1) Make sure you have administrative rights on the computer and backup all the user databases.


2) Uninstall the existing SQL Server and all the components from the control panel. Remember to backup the user databases before uninstalling SQL Server.


3) Backup (Export) the registry.


4)  Delete the following keys in regedit:
—HKEY_LOCAL_MACHINESOFTWAREMicrosoftMicrosoft SQL Server—HKEY_LOCAL_MACHINESOFTWAREMicrosoftMSSQLServer


5)Goto HKEY_LOCAL_MACHINESOFTWAREMicrosoftWindowsCurrentVersionUninstall  and delete all the sub-keys referencing SQL Server.


6) Go to HKEY_LOCAL_MACHINESYSTEMCurrentControlSetServices and delete all the keys referencing SQL Server.


7)   Rename / Delete all the SQL Server folders in the computer.


8)   Reboot the machine.   


9)   Install SQL Server again.

Источник

I was working on uninstalling installations of SQL 2012 and SQL 2008 R2 to later do a clean install of SQL 2012. All seems to be going relatively smooth until I encountered the following message:

Warning 26003. Microsoft SQL Server 2008 R2 Setup
Support Files cannot be uninstalled because the
following products are installed:
Microsoft SQL Server 2008 R2 RsFx Driver

Understandable; So I will uninstall using Control PanelProgramsPrograms and Features (Add/Remove for the old school). However the item wasn’t listed. After searching on how to do this using the registry I found a simpler way, I am now calling it a clean and #jermsmit supported way to doing this.

Steps to correct this issue:

We need to obtain the product GUID from WMI using WMIC so that we can use the MSIEXEC /X {GUID} command to remove the software.

Open a command prompt as administrator and type: WMIC PRODUCT LIST to get a list of products and the GUID associated with them. I found using the following command works best: WMIC PRODUCT GET Caption, IdentifyingNumber > c:info.txt 

Once you have the GUID of the software you want to uninstall you simply type: MSIEXEC /X {GUID}

Software is now uninstalled and you can proceed.

*note* the steps provided can be used for any software you are looking to uninstall that is not listed under Add/Remove programs. Just follow the steps as such:

  1. Get the product GUID from WMI (Win32_Product class)
  2. Find the GUID related to the product or products that the SQL error mentions
  3. Run MSIEXEC /X {GUID} for each of the products to uninstall them manually.

I hope you enjoyed this post
Please visit me on Facebook @ http://www.facebook.com/jermsmitcom & via twitter: #jermsmit


  • Tags


    Add/Remove Programs, Error, GUID, jermsmit, MSIEXEC, RsFx Driver, SQL, SQL 2008 R2, Uninstall, Warning 26003, WMI
Источник

gOxiAЗагрузка SQL Server 2012 RTM была завершена сегодня из-за локальной установкиMicrosoft WebMatrixИтак, сначала обновите локальную установку SQL Server 2008 R2 Express, то есть выберите «Обновление с SQL Server 2005, SQL Server 2008 или SQL Server 2008 R2» в мастере установки, после завершения установки обновления следуйте инструкциям мастера для перезапуска. Я запустил компьютер, но обнаружил, что предыдущие компоненты SQL Server 2008 не были удалены, а «SQL Server Management Studio» все еще был доступен. Затем я открыл «Программы и компоненты» для удаления SQL Server 2008 вручную.

При удалении файлов поддержки установщика SQL Server 2008 R2 возникла проблема: «Предупреждение 26003. Невозможно удалить файлы поддержки установщика Microsoft SQL Server 2008 R2, так как установлен следующий продукт: Драйвер Microsoft SQL Server 2008 R2 RxFx». Тем не менее, программа не найдена в списке программ. Я искал информацию в Интернете и могу использовать WMICWindows Management Instrumentation Command-line) Перечислите приложения, установленные в текущей системе, и, наконец, удалите их с помощью MSIEXEC / X!

1_thumb

Сначала откройте среду командной строки CMD, введите «WMIC», затем выполните «список продуктов», чтобы вывести список приложений, установленных в текущей системе. Найдите драйвер Microsoft SQL Server 2008 R2 RsFx.

2_thumb3_thumb

Наконец, вы можете использовать «msiexec / x {GUID} ”Командная строка для удаления. После удаления драйвера RsFx другие компоненты SQL Server можно удалить в обычном режиме!

4_thumb

Оригинальный адрес:http://goxia.maytide.net/read.php/1577.htm

Источник

0 0 голоса
Рейтинг статьи
Подписаться
Уведомить о
guest

0 комментариев
Старые
Новые Популярные
Межтекстовые Отзывы
Посмотреть все комментарии

А вот еще интересные материалы:

  • Яшка сломя голову остановился исправьте ошибки
  • Ясность цели позволяет целеустремленно добиваться намеченного исправьте ошибки
  • Ясность цели позволяет целеустремленно добиваться намеченного где ошибка
  • Ошибка 2641 мерседес вито
  • Ошибка 260015 ezviz что означает

    • ➤