Openserver httpd exe ошибка приложения

Вложения

Непрочитанное сообщение

Максим » 15 дек 2014, 13:48

Yodo780, не понятно о чём вы. Если у вас x86 система, то этот файл и добавляйте в доверенные, если x64 то соответственно Open Server x64.exe.

Непрочитанное сообщение

Yodo780 » 15 дек 2014, 14:01

Ошибка запуска httpd.exe после смены модулей

Непрочитанное сообщение

vva » 19 дек 2014, 17:51

Непрочитанное сообщение

Максим » 19 дек 2014, 19:53

Непрочитанное сообщение

vva » 19 дек 2014, 21:56

Непрочитанное сообщение

Максим » 19 дек 2014, 22:36

vva, т.е. вы ждали от 5 до 15 минут пока установится и перезагружали после этого машину? Хорошо, проверьте, что в настройках Open Server стоит «Свой Path». Если выбрано другое, то выставьте «Свой Path» и пробуйте запуск. Если не поможет, то попробуйте остановить антивирус (полностью все компоненты защиты) и после остановки защиты выключить его, потом пробуйте запуск сервера. Если не поможет, то будем смотреть дальше.

Application Error

Непрочитанное сообщение

VmL » 19 дек 2014, 23:59

2014-12-19 23:29:17  --------------------------------------------
2014-12-19 23:29:17  Начало процедуры запуска сервера
2014-12-19 23:29:18  Обновление Hosts файла
2014-12-19 23:29:18  Обновление конфигурации MySQL-5.5
2014-12-19 23:29:18  Обновление конфигурации Sendmail
2014-12-19 23:29:19  Обновление конфигурации PHP-5.3
2014-12-19 23:29:19  Обновление конфигурации PHPMyAdmin
2014-12-19 23:29:19  Обновление конфигурации Apache-2.2
2014-12-19 23:29:19  Запуск MySQL-5.5
2014-12-19 23:29:20  Запуск Apache-2.2
2014-12-19 23:29:20  Проверка состояния сервера
2014-12-19 23:29:25  Cервер успешно запущен за 7,784 секунд!

Непрочитанное сообщение

Максим » 20 дек 2014, 00:07

VmL, вы не запускаете на чистом конфиге. Либо подкинули профиль от старой версии программы, либо какое-то из полей настроек оставили пустым (порт, количество потоков, секунд ожидания и т.д. всё что цифрами может быть).

Непрочитанное сообщение

VmL » 20 дек 2014, 00:24

EXE
httpd.exe

Идентификатор статьи:   566062

Выберите программное обеспечение

1. 
   

   stanik
   Активный пользователь

   С нами с:

   10 апр 2007

   Сообщения:

   3

   Симпатии:

   0

   Поставил Апач — httpd-2.2.21-win32-x86-openssl-0.9.8r.msi
   Проверил — работает. Ставлю сразу с доменом.
   Следом поставил — php-5.2.17-Win32-VC6-x86.msi
   Апач монитор увидел что тут есть ПХП, но при запуске выдает ошибку, не запускается, в логах системных пишет:Уже мозг кипит по полной. Где ошибка, никак не пойму. Если кто может, прошу подскажите!!!

   Ошибка с еррором апача:

   А тут файл httpd.conf:

   2. # This is the main Apache HTTP server configuration file.  It contains the
   3. # configuration directives that give the server its instructions.
   4. # See <URL:http://httpd.apache.org/docs/2.2> for detailed information.
   6. # <URL:http://httpd.apache.org/docs/2.2/mod/directives.html>
   7. # for a discussion of each configuration directive.
   9. # Do NOT simply read the instructions in here without understanding
   10. # what they do.  They’re here only as hints or reminders.  If you are unsure
   11. # consult the online docs. You have been warned.  
   13. # Configuration and logfile names: If the filenames you specify for many
   14. # of the server’s control files begin with «/» (or «drive:/» for Win32), the
   15. # server will use that explicit path.  If the filenames do *not* begin
   16. # with «/», the value of ServerRoot is prepended — so «logs/foo.log»
   17. # with ServerRoot set to «C:/web/Apache» will be interpreted by the
   18. # server as «C:/web/Apache/logs/foo.log».
   20. # NOTE: Where filenames are specified, you must use forward slashes
   21. # instead of backslashes (e.g., «c:/apache» instead of «c:apache»).
   22. # If a drive letter is omitted, the drive on which httpd.exe is located
   23. # will be used by default.  It is recommended that you always supply
   24. # an explicit drive letter in absolute paths to avoid confusion.
   27. # ServerRoot: The top of the directory tree under which the server’s
   28. # configuration, error, and log files are kept.
   30. # Do not add a slash at the end of the directory path.  If you point
   31. # ServerRoot at a non-local disk, be sure to point the LockFile directive
   32. # at a local disk.  If you wish to share the same ServerRoot for multiple
   33. # httpd daemons, you will need to change at least LockFile and PidFile.
   35. ServerRoot «C:/web/Apache»
   38. # Listen: Allows you to bind Apache to specific IP addresses and/or
   39. # ports, instead of the default. See also the <VirtualHost>
   42. # Change this to Listen on specific IP addresses as shown below to
   43. # prevent Apache from glomming onto all bound IP addresses.
   49. # Dynamic Shared Object (DSO) Support
   51. # To be able to use the functionality of a module which was built as a DSO you
   52. # have to place corresponding `LoadModule’ lines at this location so the
   53. # directives contained in it are actually available _before_ they are used.
   54. # Statically compiled modules (those listed by `httpd -l’) do not need
   58. # LoadModule foo_module modules/mod_foo.so
   60. LoadModule actions_module modules/mod_actions.so
   61. LoadModule alias_module modules/mod_alias.so
   62. LoadModule asis_module modules/mod_asis.so
   63. LoadModule auth_basic_module modules/mod_auth_basic.so
   64. #LoadModule auth_digest_module modules/mod_auth_digest.so
   65. #LoadModule authn_alias_module modules/mod_authn_alias.so
   66. #LoadModule authn_anon_module modules/mod_authn_anon.so
   67. #LoadModule authn_dbd_module modules/mod_authn_dbd.so
   68. #LoadModule authn_dbm_module modules/mod_authn_dbm.so
   69. LoadModule authn_default_module modules/mod_authn_default.so
   70. LoadModule authn_file_module modules/mod_authn_file.so
   71. #LoadModule authnz_ldap_module modules/mod_authnz_ldap.so
   72. #LoadModule authz_dbm_module modules/mod_authz_dbm.so
   73. LoadModule authz_default_module modules/mod_authz_default.so
   74. LoadModule authz_groupfile_module modules/mod_authz_groupfile.so
   75. LoadModule authz_host_module modules/mod_authz_host.so
   76. #LoadModule authz_owner_module modules/mod_authz_owner.so
   77. LoadModule authz_user_module modules/mod_authz_user.so
   78. LoadModule autoindex_module modules/mod_autoindex.so
   79. #LoadModule cache_module modules/mod_cache.so
   80. #LoadModule cern_meta_module modules/mod_cern_meta.so
   81. LoadModule cgi_module modules/mod_cgi.so
   82. #LoadModule charset_lite_module modules/mod_charset_lite.so
   83. #LoadModule dav_module modules/mod_dav.so
   84. #LoadModule dav_fs_module modules/mod_dav_fs.so
   85. #LoadModule dav_lock_module modules/mod_dav_lock.so
   86. #LoadModule dbd_module modules/mod_dbd.so
   87. #LoadModule deflate_module modules/mod_deflate.so
   88. LoadModule dir_module modules/mod_dir.so
   89. #LoadModule disk_cache_module modules/mod_disk_cache.so
   90. #LoadModule dumpio_module modules/mod_dumpio.so
   91. LoadModule env_module modules/mod_env.so
   92. #LoadModule expires_module modules/mod_expires.so
   93. #LoadModule ext_filter_module modules/mod_ext_filter.so
   94. #LoadModule file_cache_module modules/mod_file_cache.so
   95. #LoadModule filter_module modules/mod_filter.so
   96. #LoadModule headers_module modules/mod_headers.so
   97. #LoadModule ident_module modules/mod_ident.so
   98. #LoadModule imagemap_module modules/mod_imagemap.so
   99. LoadModule include_module modules/mod_include.so
   100. #LoadModule info_module modules/mod_info.so
   101. LoadModule isapi_module modules/mod_isapi.so
   102. #LoadModule ldap_module modules/mod_ldap.so
   103. #LoadModule logio_module modules/mod_logio.so
   104. LoadModule log_config_module modules/mod_log_config.so
   105. #LoadModule log_forensic_module modules/mod_log_forensic.so
   106. #LoadModule mem_cache_module modules/mod_mem_cache.so
   107. LoadModule mime_module modules/mod_mime.so
   108. #LoadModule mime_magic_module modules/mod_mime_magic.so
   109. LoadModule negotiation_module modules/mod_negotiation.so
   110. #LoadModule proxy_module modules/mod_proxy.so
   111. #LoadModule proxy_ajp_module modules/mod_proxy_ajp.so
   112. #LoadModule proxy_balancer_module modules/mod_proxy_balancer.so
   113. #LoadModule proxy_connect_module modules/mod_proxy_connect.so
   114. #LoadModule proxy_ftp_module modules/mod_proxy_ftp.so
   115. #LoadModule proxy_http_module modules/mod_proxy_http.so
   116. #LoadModule proxy_scgi_module modules/mod_proxy_scgi.so
   117. #LoadModule reqtimeout_module modules/mod_reqtimeout.so
   118. #LoadModule rewrite_module modules/mod_rewrite.so
   119. LoadModule setenvif_module modules/mod_setenvif.so
   120. #LoadModule speling_module modules/mod_speling.so
   121. #LoadModule ssl_module modules/mod_ssl.so
   122. #LoadModule status_module modules/mod_status.so
   123. #LoadModule substitute_module modules/mod_substitute.so
   124. #LoadModule unique_id_module modules/mod_unique_id.so
   125. #LoadModule userdir_module modules/mod_userdir.so
   126. #LoadModule usertrack_module modules/mod_usertrack.so
   127. #LoadModule version_module modules/mod_version.so
   128. #LoadModule vhost_alias_module modules/mod_vhost_alias.so
   129. LoadModule php5_module «C:\web\php\php5apache2_2.dll»
   133. <IfModule !mpm_netware_module>
   134. <IfModule !mpm_winnt_module>
   136. # If you wish httpd to run as a different user or group, you must run
   137. # httpd as root initially and it will switch.  
   139. # User/Group: The name (or #number) of the user/group to run httpd as.
   140. # It is usually good practice to create a dedicated user and group for
   141. # running httpd, as with most system services.
   149. # ‘Main’ server configuration
   151. # The directives in this section set up the values used by the ‘main’
   152. # server, which responds to any requests that aren’t handled by a
   153. # <VirtualHost> definition.  These values also provide defaults for
   154. # any <VirtualHost> containers you may define later in the file.
   156. # All of these directives may appear inside <VirtualHost> containers,
   157. # in which case these default settings will be overridden for the
   158. # virtual host being defined.
   162. # ServerAdmin: Your address, where problems with the server should be
   163. # e-mailed.  This address appears on some server-generated pages, such
   164. # as error documents.  e.g. admin@your-domain.com
   166. ServerAdmin admin@meddezfarm.ru
   169. # ServerName gives the name and port that the server uses to identify itself.
   170. # This can often be determined automatically, but we recommend you specify
   171. # it explicitly to prevent problems during startup.
   173. # If your host doesn’t have a registered DNS name, enter its IP address here.
   175. ServerName www.meddezfarm.ru:80
   178. # DocumentRoot: The directory out of which you will serve your
   179. # documents. By default, all requests are taken from this directory, but
   180. # symbolic links and aliases may be used to point to other locations.
   182. DocumentRoot «C:/web/Apache/htdocs»
   185. # Each directory to which Apache has access can be configured with respect
   186. # to which services and features are allowed and/or disabled in that
   187. # directory (and its subdirectories).
   189. # First, we configure the «default» to be a very restrictive set of
   200. # Note that from this point forward you must specifically allow
   201. # particular features to be enabled — so if something’s not working as
   202. # you might expect, make sure that you have specifically enabled it
   207. # This should be changed to whatever you set DocumentRoot to.
   209. <Directory «C:/web/Apache/htdocs»>
   211.     # Possible values for the Options directive are «None», «All»,
   213.     #   Indexes Includes FollowSymLinks SymLinksifOwnerMatch ExecCGI MultiViews
   215.     # Note that «MultiViews» must be named *explicitly* — «Options All»
   216.     # doesn’t give it to you.
   218.     # The Options directive is both complicated and important.  Please see
   219.     # http://httpd.apache.org/docs/2.2/mod/core.html#options
   222.     Options Indexes FollowSymLinks
   225.     # AllowOverride controls what directives may be placed in .htaccess files.
   226.     # It can be «All», «None», or any combination of the keywords:
   227.     #   Options FileInfo AuthConfig Limit
   232.     # Controls who can get stuff from this server.
   240. # DirectoryIndex: sets the file that Apache will serve if a directory
   244.     DirectoryIndex index.php index.html index.htm
   248. # The following lines prevent .htaccess and .htpasswd files from being
   258. # ErrorLog: The location of the error log file.
   259. # If you do not specify an ErrorLog directive within a <VirtualHost>
   260. # container, error messages relating to that virtual host will be
   261. # logged here.  If you *do* define an error logfile for a <VirtualHost>
   262. # container, that host’s errors will be logged there and not here.
   264. ErrorLog «logs/error.log»
   267. # LogLevel: Control the number of messages logged to the error_log.
   268. # Possible values include: debug, info, notice, warn, error, crit,
   273. <IfModule log_config_module>
   275.     # The following directives define some format nicknames for use with
   276.     # a CustomLog directive (see below).
   278.     LogFormat «%h %l %u %t «%r» %>s %b «%{Referer}i» «%{User-Agent}i»» combined
   279.     LogFormat «%h %l %u %t «%r» %>s %b» common
   282.       # You need to enable mod_logio.c to use %I and %O
   283.       LogFormat «%h %l %u %t «%r» %>s %b «%{Referer}i» «%{User-Agent}i» %I %O» combinedio
   287.     # The location and format of the access logfile (Common Logfile Format).
   288.     # If you do not define any access logfiles within a <VirtualHost>
   289.     # container, they will be logged here.  Contrariwise, if you *do*
   290.     # define per-<VirtualHost> access logfiles, transactions will be
   291.     # logged therein and *not* in this file.
   293.     CustomLog «logs/access.log» common
   296.     # If you prefer a logfile with access, agent, and referer information
   297.     # (Combined Logfile Format) you can use the following directive.
   299.     #CustomLog «logs/access.log» combined
   304.     # Redirect: Allows you to tell clients about documents that used to
   305.     # exist in your server’s namespace, but do not anymore. The client
   306.     # will make a new request for the document at its new location.
   308.     # Redirect permanent /foo http://www.meddezfarm.ru/bar
   311.     # Alias: Maps web paths into filesystem paths and is used to
   312.     # access content that does not live under the DocumentRoot.
   314.     # Alias /webpath /full/filesystem/path
   316.     # If you include a trailing / on /webpath then the server will
   317.     # require it to be present in the URL.  You will also likely
   318.     # need to provide a <Directory> section to allow access to
   322.     # ScriptAlias: This controls which directories contain server scripts.
   323.     # ScriptAliases are essentially the same as Aliases, except that
   324.     # documents in the target directory are treated as applications and
   325.     # run by the server when requested rather than as documents sent to the
   326.     # client.  The same rules about trailing «/» apply to ScriptAlias
   327.     # directives as to Alias.
   329.     ScriptAlias /cgi-bin/ «C:/web/Apache/cgi-bin/»
   335.     # ScriptSock: On threaded servers, designate the path to the UNIX
   336.     # socket used to communicate with the CGI daemon of mod_cgid.
   342. # «C:/web/Apache/cgi-bin» should be changed to whatever your ScriptAliased
   343. # CGI directory exists, if you have that configured.
   345. <Directory «C:/web/Apache/cgi-bin»>
   353. # DefaultType: the default MIME type the server will use for a document
   354. # if it cannot otherwise determine one, such as from filename extensions.
   355. # If your server contains mostly text or HTML documents, «text/plain» is
   356. # a good value.  If most of your content is binary, such as applications
   357. # or images, you may want to use «application/octet-stream» instead to
   358. # keep browsers from trying to display binary files as though they are
   365.     # TypesConfig points to the file containing the list of mappings from
   366.     # filename extension to MIME-type.
   368.     TypesConfig conf/mime.types
   371.     # AddType allows you to add to or override the MIME configuration
   372.     # file specified in TypesConfig for specific file types.
   374.     #AddType application/x-gzip .tgz
   376.     # AddEncoding allows you to have certain browsers uncompress
   377.     # information on the fly. Note: Not all browsers support this.
   379.     #AddEncoding x-compress .Z
   380.     #AddEncoding x-gzip .gz .tgz
   382.     # If the AddEncoding directives above are commented-out, then you
   383.     # probably should define those extensions to indicate media types:
   385.     AddType application/x-compress .Z
   386.     AddType application/x-gzip .gz .tgz
   389.     # AddHandler allows you to map certain file extensions to «handlers»:
   390.     # actions unrelated to filetype. These can be either built into the server
   391.     # or added with the Action directive (see below)
   393.     # To use CGI scripts outside of ScriptAliased directories:
   394.     # (You will also need to add «ExecCGI» to the «Options» directive.)
   396.     #AddHandler cgi-script .cgi
   398.     # For type maps (negotiated resources):
   402.     # Filters allow you to process content before it is sent to the client.
   404.     # To parse .shtml files for server-side includes (SSI):
   405.     # (You will also need to add «Includes» to the «Options» directive.)
   407.     #AddType text/html .shtml
   408.     #AddOutputFilter INCLUDES .shtml
   412. # The mod_mime_magic module allows the server to use various hints from the
   413. # contents of the file itself to determine its type.  The MIMEMagicFile
   414. # directive tells the module where the hint definitions are located.
   416. #MIMEMagicFile conf/magic
   419. # Customizable error responses come in three flavors:
   420. # 1) plain text 2) local redirects 3) external redirects
   423. #ErrorDocument 500 «The server made a boo boo.»
   424. #ErrorDocument 404 /missing.html
   425. #ErrorDocument 404 «/cgi-bin/missing_handler.pl»
   426. #ErrorDocument 402 http://www.meddezfarm.ru/subscription_info.html
   430. # MaxRanges: Maximum number of Ranges in a request before
   431. # returning the entire resource, or 0 for unlimited
   432. # Default setting is to accept 200 Ranges
   436. # EnableMMAP and EnableSendfile: On systems that support it,
   437. # memory-mapping or the sendfile syscall is used to deliver
   438. # files.  This usually improves server performance, but must
   439. # be turned off when serving from networked-mounted
   440. # filesystems or if support for these functions is otherwise
   446. # Supplemental configuration
   448. # The configuration files in the conf/extra/ directory can be
   449. # included to add extra features or to modify the default configuration of
   450. # the server, or you may simply copy their contents here and change as
   453. # Server-pool management (MPM specific)
   454. #Include conf/extra/httpd-mpm.conf
   456. # Multi-language error messages
   457. #Include conf/extra/httpd-multilang-errordoc.conf
   459. # Fancy directory listings
   460. #Include conf/extra/httpd-autoindex.conf
   463. #Include conf/extra/httpd-languages.conf
   466. #Include conf/extra/httpd-userdir.conf
   468. # Real-time info on requests and configuration
   469. #Include conf/extra/httpd-info.conf
   472. #Include conf/extra/httpd-vhosts.conf
   474. # Local access to the Apache HTTP Server Manual
   475. #Include conf/extra/httpd-manual.conf
   477. # Distributed authoring and versioning (WebDAV)
   478. #Include conf/extra/httpd-dav.conf
   480. # Various default settings
   481. #Include conf/extra/httpd-default.conf
   483. # Secure (SSL/TLS) connections
   484. #Include conf/extra/httpd-ssl.conf
   486. # Note: The following must must be present to support
   487. #       starting without SSL on platforms with no /dev/random equivalent
   488. #       but a statically compiled-in mod_ssl.
   491. SSLRandomSeed startup builtin
   492. SSLRandomSeed connect builtin

Вероятно, какой-то вирус на вашей XP. Попробуйте использовать IIS в качестве веб-сервера или переустановите xampp, или есть новый пакет LAMP под названием uniserver. Apache2 занимает много оперативной памяти в Windows, что также может повлиять на производительность PHP.