Kyocera 2530 коды ошибок

Все современные копировальные аппараты, мфу и принтеры Kyocera имеют возможность диагностировать все узлы устройства в режиме запуска и во время работы аппарата. По этому, если во время включения или во время работы произошел сбой, то техника Kyocera сможет сообщить о наличии ошибки.

В большинстве случаев у аппаратов Kyocera код ошибки отображается на дисплее, в остальных случаях тип ошибки зависит от последовательности и количества миганий индикаторов.
Если Ваш копировальный аппарат, МФУ или принтер Kyocera выдал на дисплее некий код, то узнать причину, описание возникновения ошибки, а так же в каком узле аппарата стоит искать проблему, Вы можете в этом разделе выбрав интересующую модель из списка.

Но диагностика не решит проблему сбоя аппарата, для этого лучше обратиться к профессиональным и опытным сервисным специалистам компании Kyomart! Позвоните нам по телефону
8 (343) 288-23-45 или отправьте запрос на электронную почту: sales@kyomart.ru , и мы обязательно свяжемся с Вами в кратчайшие сроки.

Код ошибки Описание ошибки Причина ошибки 0030 FAX control PWB system error
Processing with the fax software was disabled due to a hardware problem. Defective FAX control PWB. 0070 FAX control PWB incompatible detection Error
Abnormal detection of FAX control PWB incompatibility In the initial communication with the FAX control PWB, any normal communication command is not transmitted. Defective fax software. Defective FAX control PWB. 0100 Backup memory device error Defective flash memory. Defective control PWB. Defective flash memory. Defective control PWB. 0120 MAC address data error Defective flash memory. 0130 Backup memory read/write error Defective flash memory. Defective control PWB 0140 Backup memory data error Defective flash memory. Defective control PWB. 0150 Control PWB EEPROM error
Detecting control PWB EEPROM (U17) communication error. Improper installation control PWB EEPROM (U17). Defective control PWB. 0170 Billing counting error Defective control PWB. Data damage of control PWB EEPROM (U17). 0180 Machine number mismatch
Machine number of main and engine does not match. The main PWB or the engine PWB were exchanged. Data damage of control PWB EEPROM (U17). 0420 Paper feeder communication error
Communication error between control PWB and optional paper feeder. Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. Defective PF mainPWB. 0830 FAX control PWB flash program area checksum error
A checksum error occurred with the program of the FAX control PWB. Defective fax software. Defective FAX control PWB. 0840 Faults of RTC
The time is judged to go back based on the comparison of the RTC time and the current time or five years or more have passed. Defective control PWB. The battery is disconnected from the control PWB. 0870 FAX control PWB to control PWB high capacity data transfer problem
High-capacity data transfer between the FAX control PWB and the control PWB of the machine was not normally performed even if the data transfer was retried the specified times. Improper installation FAX control PWB. Defective FAX control PWB or control PWB. 0920 Fax file system error
The backup data is not retained for file system abnormality of flash memory of the FAX control PWB. Defective FAX control PWB. 2000 Main motor error
The main motor ready input is not given for 2 s during the main motor is ON. Defective harness between main motor (CN1) and control PWB (YC17), or improper connector insertion. Defective drive transmission system of the main motor. Defective main motor. Defective control PWB. 2610 PF paper feed motor error (paper feeder)
The PF paper feed motor of cassette 2 ready input is not given for 2 s during the PF paper feed motor is ON. Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion. Defective PF paper feed motor drive transmission system. Defective PF main motor. Defective control PWB. 2620 PF paper feed motor error (Paper feeder)
The PF paper feed motor of cassette 3 ready input is not given for 2 s during the PF paper feed motor is ON. Defective harness between PF paper feed motor and PF main PWB (YC4), or improper connector insertion. Defective PF paper feed motor drive transmission system. Defective PF main motor. Defective control PWB. 3100 ISU home position errorr. Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective FFC between control PWB (YC6) and scanner PWB (YC103), or improper FFC insertion. Defective home position sensor. Defective harness between ISU motor and scanner PWB (YC104), or improper connector insertion. Defective ISU motor. 3200 Exposure lamp error
The exposure lamp is not turned on. Defective FFC between scanner PWB (YC103) and control PWB (YC6), or improper FFC insertion. Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective harness between CCD PWB (YC3) and LED drive PWB (YC1), or improper connector insertion. Defective harness between LED drive PWB (YC2) and exposure lamp, or improper connector insertion. Defective exposure lamp.sensor. Defective LED drive PWB. Defective control PWB. 3300 AGC error
After AGC, correct input is not obtained at CCD. Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective exposure lamp.sensor. Defective CCD PWB. Defective control PWB. 3500 CPU — ASIC (CCD PWB) communication error
An error code is detected. Defective FFC between CCD PWB (YC1) and control PWB (YC8). Defective CCD PWB. Defective control PWB. 4000 Polygon motor (laser scanner unit) error
The polygon motor ready input is not given for 6 s during the polygon motor is ON. Defective harness between polygon motor and control PWB (YC10), or improper connector insertion. Defective laser scanner unit. Defective control PWB. 4200 BD error (laser scanner unit) error. BD sensor does not detect laser beam due to condensation on the polygon mirror. Defective laser scanner unit. Defective control PWB. 4700 VIDEO ASIC device error
Mismatch of reading data from two locations occurs eight times successively. Mismatch between writing data and reading data occurs eight times successively. Defective connector cable or poor contact in the connector. Defective control PWB. 6000 Broken Fuser heater wire
The fuser temperature does not rise after the Fuser heater has been turned on. Poor contact in the fuser thermistor connector terminals. Poor contact in the Fuser heater connector terminals. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater installed incorrectly. Broken Fuser heater wire. 6020 Abnormally high fuser thermistor temperature
Fuser thermistor detects abnormally temperature. When the temperature of a fuser thermistor detects 195 °C or more at the time of heater OFF and 155 °C or more. Shorted fuser thermistor. Defective control PWB. 6030 Broken fuser thermistor wire
Input from fuser thermistor is 0 (A/D value). Poor contact in the fuser thermistor connector terminals. Broken fuser thermistor wire. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater installed incorrectly. Broken Fuser heater wire. 6400 Zero cross signal error
The zero cross signal does not reach the control PWB for specified time. Defective harness between high voltage PWB (CN202) and control PWB (YC23), or improper connector insertion. Defective connection between power source PWB (YC103) and high voltage PWB (CN201). Defective power source PWB. Defective control PWB. 7990 Waste toner full
The waste toner sensor has detected that the waste toner reservoir (drum unit) is full. Waste toner reservoir (drum unit) is full. Defective waste toner sensor. Defective control PWB. F000 Control PWB — Operation panel PWB communication error Defective harness between operation panel PWB (YC1) and control PWB (YC7), or improper connector insertion. motor is ON. Defective operation panel PWB. Defective control PWB. F020 Control PWB RAM checksum error Defective main memory (RAM) on the control PWB. Defective expanded memory (DIMM). F040 Control PWB engine communication error
A communication error is detected. Defective control PWB. F041 Control PWB — scanner PWB communication error
A communication error is detected. Defective control PWB or scanner PWB. F050 Control PWB engine checksum error Some error may have occurred when downloading the firmware of the control PWB. Defective control PWB. F186 Control PWB video data control error Defective control PWB.

Источник

Ошибки Kyocera ECOSYS M2030dn

Ошибки Kyocera ECOSYS M2030pn

Ошибки Kyocera ECOSYS M2035dn

Ошибки Kyocera ECOSYS M2040dn

Ошибки Kyocera ECOSYS M2135dn

Ошибки Kyocera ECOSYS M2530dn

Ошибки Kyocera ECOSYS M2535dn

Ошибки Kyocera ECOSYS M2540dn

Ошибки Kyocera ECOSYS M2540dw

Ошибки Kyocera ECOSYS M2635dn

Ошибки Kyocera ECOSYS M2635dw

Ошибки Kyocera ECOSYS M2640idw

Ошибки Kyocera ECOSYS M3040dn

Ошибки Kyocera ECOSYS M3040idn

Ошибки Kyocera ECOSYS M3145dn

Ошибки Kyocera ECOSYS M3145idn

Ошибки Kyocera ECOSYS M2735dw

Ошибки Kyocera ECOSYS M3540dn

Ошибки Kyocera ECOSYS M3540idn

Ошибки Kyocera ECOSYS M3550idn

Ошибки Kyocera ECOSYS M3560idn

Ошибки Kyocera ECOSYS M3645dn

Ошибки Kyocera ECOSYS M3645idn

Ошибки Kyocera ECOSYS M3655idn

Ошибки Kyocera ECOSYS M3660idn

Ошибки Kyocera ECOSYS M3860idn

Ошибки Kyocera ECOSYS M4125idn

Ошибки Kyocera ECOSYS M4132idn

Ошибки Kyocera ECOSYS M5521cdn

Ошибки Kyocera ECOSYS M5521cdw

Ошибки Kyocera ECOSYS M5526cdn

Ошибки Kyocera ECOSYS M5526cdw

Ошибки Kyocera ECOSYS M6026cdn

Ошибки Kyocera ECOSYS M6026cidn

Ошибки Kyocera ECOSYS M6030cdn

Ошибки Kyocera ECOSYS M6035cidn

Ошибки Kyocera ECOSYS M6230cidn

Ошибки Kyocera ECOSYS M6235cidn

Ошибки Kyocera ECOSYS M6526cdn

Ошибки Kyocera ECOSYS M6526cidn

Ошибки Kyocera ECOSYS M6530cdn

Ошибки Kyocera ECOSYS M6535cidn

Ошибки Kyocera ECOSYS M6630cidn

Ошибки Kyocera ECOSYS M6635cidn

Ошибки Kyocera ECOSYS M8124cidn

Ошибки Kyocera ECOSYS M8130cidn

Ошибки Kyocera ECOSYS P2035d

Ошибки Kyocera ECOSYS P2040dn

Ошибки Kyocera ECOSYS P2040dw

Ошибки Kyocera ECOSYS P2135d

Ошибки Kyocera ECOSYS P2135dn

Ошибки Kyocera ECOSYS P2235dn

Ошибки Kyocera ECOSYS P2235dw

Ошибки Kyocera ECOSYS P3045dn

Ошибки Kyocera ECOSYS P3050dn

Ошибки Kyocera ECOSYS P3055dn

Ошибки Kyocera ECOSYS P3060dn

Ошибки Kyocera ECOSYS P3145dn

Ошибки Kyocera ECOSYS P3150dn

Ошибки Kyocera ECOSYS P3155dn

Ошибки Kyocera ECOSYS P3160dn

Ошибки Kyocera ECOSYS P3260dn

Ошибки Kyocera ECOSYS P4035dn

Ошибки Kyocera ECOSYS P4040dn

Ошибки Kyocera ECOSYS P5021cdn

Ошибки Kyocera ECOSYS P5021cdw

Ошибки Kyocera ECOSYS P5026cdn

Ошибки Kyocera ECOSYS P5026cdw

Ошибки Kyocera ECOSYS P6021cdn

Ошибки Kyocera ECOSYS P6026cdn

Ошибки Kyocera ECOSYS P6030cdn

Ошибки Kyocera ECOSYS P6035cdn

Ошибки Kyocera ECOSYS P6130cdn

Ошибки Kyocera ECOSYS P6230cdn

Ошибки Kyocera ECOSYS P6235cdn

Ошибки Kyocera ECOSYS P7035cdn

Ошибки Kyocera ECOSYS P7040cdn

Ошибки Kyocera ECOSYS P7240cdn

Ошибки Kyocera ECOSYS P8060cdn

Ошибки Kyocera FS-C8600DN

Ошибки Kyocera FS-C8650DN

Ошибки Kyocera FS1016MFP

Ошибки Kyocera FS1018MFP

Ошибки Kyocera FS1020MFP

Ошибки Kyocera FS1024MFP

Ошибки Kyocera FS1025MFP

Ошибки Kyocera FS1028MFP

Ошибки Kyocera FS1030MFP

Ошибки Kyocera FS1035MFP

Ошибки Kyocera FS1040

Ошибки Kyocera FS1050

Ошибки Kyocera FS1060DN

Ошибки Kyocera FS1100

Ошибки Kyocera FS1110

Ошибки Kyocera FS1116MFP

Ошибки Kyocera FS1118MFP

Ошибки Kyocera FS1120

Ошибки Kyocera FS1120MFP

Ошибки Kyocera FS1124MFP

Ошибки Kyocera FS1125MFP

Ошибки Kyocera FS1128MFP

Ошибки Kyocera FS1130MFP

Ошибки Kyocera FS1135MFP

Ошибки Kyocera FS1200

Ошибки Kyocera FS1220MFP

Ошибки Kyocera FS1300D

Ошибки Kyocera FS1320D

Ошибки Kyocera FS1320MFP

Ошибки Kyocera FS1325MFP

Ошибки Kyocera FS1350DN

Ошибки Kyocera FS1370DN

Ошибки Kyocera FS1500

Ошибки Kyocera FS6020

Ошибки Kyocera FS6025MFP

Ошибки Kyocera FS6025MFPB

Ошибки Kyocera FS6030MFP

Ошибки Kyocera FS6500

Ошибки Kyocera FS6525MFP

Ошибки Kyocera FS6530MFP

Ошибки Kyocera FS6700

Ошибки Kyocera FS6900

Ошибки Kyocera FS6950DN

Ошибки Kyocera FS8000CD

Ошибки Kyocera FS8000CN

Ошибки Kyocera FS8100DN

Ошибки Kyocera TASKalfa 180

Ошибки Kyocera TASKalfa 1800

Ошибки Kyocera TASKalfa 1801

Ошибки Kyocera TASKalfa 181

Ошибки Kyocera TASKalfa 205c

Ошибки Kyocera TASKalfa 220

Ошибки Kyocera TASKalfa 2200

Ошибки Kyocera TASKalfa 2201

Ошибки Kyocera TASKalfa 221

Ошибки Kyocera TASKalfa 2420w

Ошибки Kyocera TASKalfa 2460ci

Ошибки Kyocera TASKalfa 2470ci

Ошибки Kyocera TASKalfa 250ci

Ошибки Kyocera TASKalfa 2510i

Ошибки Kyocera TASKalfa 2520i

Ошибки Kyocera TASKalfa 255

Ошибки Kyocera TASKalfa 2550ci

Ошибки Kyocera TASKalfa 2551ci

Ошибки Kyocera TASKalfa 2552ci

Ошибки Kyocera TASKalfa 2553ci

Ошибки Kyocera TASKalfa 255b

Ошибки Kyocera TASKalfa 255c

Ошибки Kyocera TASKalfa 265ci

Ошибки Kyocera TASKalfa 300ci

Ошибки Kyocera TASKalfa 300i

Ошибки Kyocera TASKalfa 3010i

Ошибки Kyocera TASKalfa 3011i

Ошибки Kyocera TASKalfa 305

Ошибки Kyocera TASKalfa 3050ci

Ошибки Kyocera TASKalfa 3051ci

Ошибки Kyocera TASKalfa 306ci

Ошибки Kyocera TASKalfa 307ci

Ошибки Kyocera TASKalfa 308ci

Ошибки Kyocera TASKalfa 3212i

Ошибки Kyocera TASKalfa 3252ci

Ошибки Kyocera TASKalfa 3253ci

Ошибки Kyocera TASKalfa 3500i

Ошибки Kyocera TASKalfa 3501i

Ошибки Kyocera TASKalfa 350ci

Ошибки Kyocera TASKalfa 3510i

Ошибки Kyocera TASKalfa 3511i

Ошибки Kyocera TASKalfa 3550ci

Ошибки Kyocera TASKalfa 3551ci

Ошибки Kyocera TASKalfa 3552ci

Ошибки Kyocera TASKalfa 3553ci

Ошибки Kyocera TASKalfa 356ci

Ошибки Kyocera TASKalfa 358ci

Ошибки Kyocera TASKalfa 4002i

Ошибки Kyocera TASKalfa 4003i

Ошибки Kyocera TASKalfa 400ci

Ошибки Kyocera TASKalfa 4012i

Ошибки Kyocera TASKalfa 4052ci

Ошибки Kyocera TASKalfa 4053ci

Ошибки Kyocera TASKalfa 406ci

Ошибки Kyocera TASKalfa 408ci

Ошибки Kyocera TASKalfa 420i

Ошибки Kyocera TASKalfa 4500i

Ошибки Kyocera TASKalfa 4501i

Ошибки Kyocera TASKalfa 4550ci

Ошибки Kyocera TASKalfa 4551ci

Ошибки Kyocera TASKalfa 4820w

Ошибки Kyocera TASKalfa 5002i

Ошибки Kyocera TASKalfa 5003i

Ошибки Kyocera TASKalfa 500ci

Ошибки Kyocera TASKalfa 5052ci

Ошибки Kyocera TASKalfa 5053ci

Ошибки Kyocera TASKalfa 508ci

Ошибки Kyocera TASKalfa 520i

Ошибки Kyocera TASKalfa 5500i

Ошибки Kyocera TASKalfa 5501i

Ошибки Kyocera TASKalfa 550c

Ошибки Kyocera TASKalfa 552ci

Ошибки Kyocera TASKalfa 5550ci

Ошибки Kyocera TASKalfa 5551ci

Ошибки Kyocera TASKalfa 6002i

Ошибки Kyocera TASKalfa 6003i

Ошибки Kyocera TASKalfa 6052ci

Ошибки Kyocera TASKalfa 6053ci

Ошибки Kyocera TASKalfa 620

Ошибки Kyocera TASKalfa 6500i

Ошибки Kyocera TASKalfa 6501i

Ошибки Kyocera TASKalfa 650c

Ошибки Kyocera TASKalfa 6550ci

Ошибки Kyocera TASKalfa 6551ci

Ошибки Kyocera TASKalfa 7002i

Ошибки Kyocera TASKalfa 7003i

Ошибки Kyocera TASKalfa 7052ci

Ошибки Kyocera TASKalfa 7353ci

Ошибки Kyocera TASKalfa 750c

Ошибки Kyocera TASKalfa 7550ci

Ошибки Kyocera TASKalfa 7551ci

Ошибки Kyocera TASKalfa 8000i

Ошибки Kyocera TASKalfa 8001i

Ошибки Kyocera TASKalfa 8002i

Ошибки Kyocera TASKalfa 8003i

Ошибки Kyocera TASKalfa 8052ci

Ошибки Kyocera TASKalfa 820

Ошибки Kyocera TASKalfa 8353ci

Ошибки Kyocera TASKalfa 9002i

Ошибки Kyocera TASKalfa 9003i

Источник

Если при работе с копировальном аппаратом у вас возникли проблемы, и система выдает код ошибки, вы можете идентифицировать ее с помощью данной таблицы.
Коды ошибок Kyocera-Mita указаны для более поздних моделей копиров. Если вы являетесь владельцем более ранней модели, необходимо к трехзначному коду ошибки прибавить знак «0».

Общие ошибки

Код ошибки	Описание
0030	Fax control PWB system problem
0070	Fax control PWB incompatibility detection problem
0100	Backup memory read/write problem (main board)
0110	Backup memory data problem (main board)
0120	Drum EEPROM read/write problem (для 2550)
0130	Backup memory read/write problem (main PCB EEPROM) (для 1650/2050/2550)
0140	Backup memory data problem (main PCB EEPROM) (для 1650/2050/2550)
0150	Backup memory read/write problem (engine board)
0160	Backup memory data problem (engine board)
0170	Accounting count problem
0180	Machine number mismatch
0210	Communication problem between the main board and engine board (для KM-1500/1620/2020/1635/2035/1650/2050/2550/6030/8030, FS-1018/1118)
Communication problem between the main board and operation board (для KM-1525/1530/2030/2530/3530/6230/4530/5530/6330/7530)
0240	Printer board PWB communication problem
0250	Scanner network board communication problem
0280	Communication problem between the fax control PWB and main PWB
0320	Side deck communication problem
0340	Finisher communication problem
0410	Optional DP communication problem
0420	Optional first paper feeder communication problem
Large paper deck /paper feed desk communication problem /Side deck communication problem
0440	Finisher communication problem
0450	Mailbox communication problem
0470	Switchback unit communication problem
0500	Optional second paper feeder communication problem
0510	Optional third paper feeder communication problem
0600	DIMM problem (для 2530/3530)
0610	Bitmap (DIMM) problem
0620	Memory input interface problem
0630	DMA problem
0640	Hard disk drive problem
0800	Image processing problem (JAM05 is detected twice)
0820	Fax control PCB CG ROM checksum error
0830	Flash ROM program area checksum error
0860	Fax control PCB software switch checksum error
0870	Fax control PWB to main PWB high capacity data transfer problem
0880	Fax control PWB program archive problem
0890	Fax control PCB CG font archive problem
0900	Fax software incompatibility detection problem
0920	Fax file system error
0960	Developer EEPROM read/write problem (для 2550/6030/8030)
1000	Exposure lamp problem
1010	Lift motor 1 error
1020	Lift motor 2 error
1030	Lift motor 3 error
1040	Lift motor 4 error
1100	Paper deck motor 1 problem [Drawer 3]
1110	Paper deck motor 2 problem [Drawer 4]
1120	Deck right lift position problem
1130	Deck left lift position problem
1140	Side deck lift motor (going up) problem
1150	Side deck lift motor (going down) problem
1160	Large paper deck (paper feed desk) sequence problem
1170	Large paper deck (paper feed desk) incorrect type problem
2000	Main motor problem
Image forming motor problem (для 6230/4530/5530/6330/7530)
2500	Paper feed motor problem
2550	Paper conveying motor problem (для 4530/5530)
2600	Deck conveying motor /desk drive motor problem
2640	Side deck drive motor problem
3100	Scanner carriage problem
3200	Exposure lamp problem
3300	Optical system (AGC) problem
4000	Polygon motor synchronization problem
4010	Polygon motor steady-state problem
4100	BD initialization (A) problem
4110	BD initialization (B) problem
4200	BD steady-state problem
5100	Main charger problem
5110	Transfer/separation high voltage problem
5300	Broken cleaning lamp wire
5500	Drum surface potential sensor problem 1
5510	Drum surface potential sensor problem 2
5600	Drum surface potential problem 1
5610	Drum surface potential problem 2
6000	Broken fixing heater wire
6020	Abnormally high fixing unit thermistor temperature
6030	Broken fixing unit thermistor
6050	Abnormally low fixing unit thermistor temperature
6100	Broken fixing heater wire
6200	Abnormally low fixing unit thermistor temperature
6300	Abnormally high fixing unit thermistor temperature
6400	Zero-crossing signal problem
6410	Fixing unit connector insertion problem
6420	Fixing fuse cut problem
6420	Broken fixing unit thermistor wire
7100	Toner sensor problem
7300	Broken external temperature thermistor wire (для KM-1505/1510/1810/4230/5230/6230)
Toner sensor problem/ Toner hopper problem (для KM-2530/3530/3035/4035/5035/6230/4530/5530/6330/7530/6030/8030)
7310	Short-circuited external temperature thermistor
7400	Image formation unit connector insertion problem
Developing unit connector insertion problem (для 2550)
7410	Drum unit connector insertion problem
7750	Drum type mismatch problem A (для 1635/2035)
7760	Drum type mismatch problem B (для 1635/2035)
7800	Broken external temperature thermistor
7810	Short-circuited external temperature thermistor

KM-1500, FS-1018/1118 (KM-1820)

Код ошибки	Описание
0220	Communication problem between the main board and operation board (для 1018/1118)
F—	Controller system error (для 1018/1118)
F010	ROM checksum error (для 1118)
F012
7980	Waste toner reservoir overflow problem (when the total number of copies is less than 100 thousand sheets)
7990	Waste toner reservoir overflow problem (when the total number of copies is 100 thousand sheets or more)

KM-1505/1510/1810/1525/1530/2030

Код ошибки	Описание
0210	Printer board communication problem (для 1505/1510/1810)
0400	DIMM problem
0410	Bitmap problem
0430	DMA problem
1040	Optical system problem (AGC)

Kyocera-Mita 3035/4035/5035

Код ошибки	Описание
0100	Operation unit PCB backup memory read/write error
0110	Operation unit PCB backup memory data problem
0210	MMI communication problem
0320	Energy save communication problem
7450	Image formation unit fuse cut problem

Kyocera Mita 4230/5230

Код ошибки	Описание
0010	Memory copy PCB 1 communication problem
0030	Memory copy PCB 2 communication problem
0100	RAM/ROM problem
0220	Communication problem between the engine PCB and main PCB
0230	Scanner communication problem
0260	Memory copy PCB 1 communication problem
0320	Large paper deck communication problem /Paper feed desk communication problem
0360	Memory copy PCB 2 communication problem
0370	Communication microcomputer problem
1040	Optical system problem (AGC)
2100	Paper conveying motor problem
2200	Side registration motor problem
2300	Paper feed motor problem
2310	Desk drive motor problem
2410	Upper lift motor problem
2420	Lower lift motor problem
2430	Upper desk lift motor problem
2440	Lower desk lift motor problem
3320	Scanner watchdog problem
3400	Original detection position problem
7400	Toner hopper problem
9200	Deck paper conveying motor problem
9210	Paper deck motor 1 problem
9220	Paper deck motor 2 problem
9230	Right lift position problem
9240	Left lift position problem

Kyocera-Mita 6030/8030

Код ошибки	Описание
0060	Main PWB type mismatch error
0130	Backup memory (EEPROM) device problem
0140	Backup memory (EEPROM) data problem
0220	Scanner communication problem
0330	Relay board communication problem
0460	Duplex unit communication problem
0470	Sheet inserter communication problem (optional document finisher)
0500	Paper feed unit communication error (cassette 1 and 2)
0510	Paper feed unit communication error (cassette 3 and 4)
0700	Side feeder EEPROM error (optional side feeder)
0750	Document finisher EEPROM error
0970	Cleaning unit EEPROM error
1200	Duplex side registration motor error
2100	Developing motor error
2200	Drive motor error
2300	Fuser motor error
2550	Transfer motor error
3210	CIS lamp problem
3310	Optical system (AGC) problem (DP)
3500	Communication error between scanner and SHD
3900	Backup memory read/write error (scanner PWB)
3910
4120	BD initialization (C) problem
7200	Broken drum thermistor wire
7210	Shorted drum thermistor
9040	DP lift motor going up error
9050	DP lift motor going down error
9060	DP EEPROM error
9070	Communication problem between DP and SHD
9080	Communication problem between DP and CIS

Kyocera Mita 6230

Код ошибки	Описание
0010	Memory PCB communication problem
0100	RAM/ROM problem
0260	Memory copy PCB 1 communication problem
0350	Mailbox communication problem
0370	Communication microcomputer problem
0380	Hard disk problem
0390	DIMM problem
1040	Optical system problem (AGC)
2100	Drive motor problem / Paper conveying motor problem
2200	Paper feed motor problem
2300	Large paper deck right lift motor problem
2310	Large paper deck left lift motor problem
2420	Upper lift motor problem
2430	Lower lift motor problem
6500	Broken fixing unit thermistor wire
7200	Broken drum thermistor wire
7210	Shorted drum thermistor
7220	Broken drum heater wire

KyoceraMita 6330/7530

Код ошибки	Описание
1060	Large paper deck left lift motor problem
2550	Drive motor problem
7520	Shorted drum thermistor
7530	Broken drum thermistor wire

Ошибки финишеров

Код ошибки	Описание
8010	Finisher paper conveying motor problem
8030	Finisher (upper) paper conveying belt problem
8140	Finisher tray elevation motor problem /Main tray problem
8170	Finisher front side registration motor problem
8180	Finisher rear side registration motor problem
Finisher rear jogger motor problem (для 4230/5230)
8190	Finisher trailing edge registration motor problem
8210	Finisher stapler motor problem
8220	Finisher rear stapler problem
8300	Document finisher centerfold unit communication problem
8310	Document finisher centerfold unit side registration guide problem
8320	Document finisher centerfold unit centering plate problem
8330	Document finisher centerfold blade problem

Ошибки финишеров KM-2530/3530/3035/4035/5035

Код ошибки	Описание
8300	Booklet stitcher paper ejection motor problem
8310	Booklet stitcher elevation motor problem
8320	Booklet stitcher rear jog motor problem
8330	Booklet stitcher front jog motor problem
8340	Booklet stitcher staple motor problem
8350	Booklet stitcher batch processing motor problem
8360	Booklet stitcher stapler shift motor problem
8370	Booklet stitcher paddle motor problem
8380	Booklet stitcher folding problem
8390	Booklet stitcher backup RAM data problem
8400	Booklet stitcher incorrect type problem
8410	Booklet stitcher punch motor problem
8420	Booklet stitcher shift motor problem
8430	Booklet stitcher punch communication problem
8440	Booklet stitcher punch sensor problem
8450	Booklet stitcher side punch sensor problem
8460	Booklet stitcher punch backup RAM data problem
8470	Booklet stitcher punch dust sensor problem
8480	Booklet stitcher broken punch power source wire problem
8500	Mailbox drive motor problem

Ошибки финишера KM-6230

Код ошибки	Описание
8180	Finisher rear jogger motor problem
8310	Booklet stitcher paper ejection motor problem
8320	Booklet stitcher elevation motor problem
8330	Booklet stitcher jog motor problem
8340	Booklet stitcher staple motor problem
8350	Booklet stitcher stapler unit shift motor problem
8360	Booklet stitcher stack level detection sensor problem
8370	Booklet stitcher punch motor problem
8380	Booklet stitcher punch shift motor problem
8390	Booklet stitcher swing motor problem
8400	Booklet stitcher backup RAM data problem
8410	Booklet stitcher punch unit backup RAM data problem
8420	Booklet stitcher positioning plate motor problem
8430	Booklet stitcher folding motor problem
8440	Booklet stitcher guide motor problem
8450	Booklet stitcher jog motor problem
8460	Booklet stitcher rear staple motor problem
8470	Booklet stitcher front staple motor problem
8480	Booklet stitcher thrust motor problem
8490	Booklet stitcher communication error

Ошибки финишеров KM-6330/7530/6030/8030

Код ошибки	Описание
8000	Document finisher incorrect type problem (для 6330/7530)
8020	Finisher punch motor problem
8040	Finisher lower paper conveying belt problem
8150	Finisher multi job tray problem
8170	Front upper side-registration guide problem
8180	Finisher rear upper side-registration guide problem
8190	Finisher lower side-registration guide problem
8220	Finisher front clincher problem
8230	Finisher rear stapler problem
8240	Finisher rear clincher problem

Источник

Индикатор ошибки на Kyocera TASKalfa 1800/2200 Если с аппаратом Kyocera TASKalfa 1800, Kyocera TASKalfa 2200 произошла проблема, откроется следующий экран с уведомлением.
• Индикатор [Внимание] на панели управления горит или мигает.
• На дисплее сообщений панели управления аппарата появилось сообщение об ошибке.

Если индикатор [Внимание] горит или мигает и на дисплее сообщений панели управления аппарата появилось сообщение об ошибке, проверьте KYOCERA Client Tool или Монитор состояния.

ПРИМЕЧАНИЕ Если индикаторы постоянно горят и мигают не так, как описано выше, вероятно, произошла ошибка службы. Выключите питание, отсоедините шнур питания и вставьте его обратно, после чего включите питание. Это может помочь сбросить ошибку. Если ошибка не исчезает, свяжитесь со своим представителем сервисной службы (тел. в Минске +375 17 291-28-24)

Ниже описаны неполадки, которые не могут быть устранены пользователем

Дисплей сообщений	Описание	Меры устранения
Бункер отраб тонера перепол. или не уст.	Бункер для отработанного тонера установлен неправильно	Установите Бункер для отработанного тонера должным образом
Бункер для отработанного тонера заполнен	Замените бункер отработанного тонера
Встряхните картр. с тонером	Тонер слежался	Откройте переднюю крышку аппарата и вытяните контейнер с тонером. Сильно встряхните контейнер с тонером и установите его на место
Вызовите сервисный персонал.	В аппарате произошла ошибка	Обратите внимание на код ошибки, отображаемый в дисплее сообщений, и свяжитесь с представителем сервисной службы (тел. в Минске +375 17 291-28-24)
Выньте бумагу с внутреннего лотка		Извлеките бумагу из внутреннего лотка. Нажмите клавишу [OK], чтобы возобновить печать
Добавьте тонер	Закончился тонер	Замените контейнер с тонером TK-4105
Загрузите бумагу в кассету #	↑↓ (отображается попеременно) A4 (формат бумаги) Обычная (тип носителя) OK: Перейдите к следующему шагу	Загрузите бумагу. Нажмите клавишу [OK] и перейдите к следующему шагу. • Для выбора другого устройства подачи выберите [Выберите бумагу]. • Для печати на бумаге, в настоящее время находящейся в устройстве подачи, выберите [Продолж. без изм.]
Загрузите бумагу в универсальный лоток	↑↓ (отображается попеременно) A4 (формат бумаги) Обычная (тип носителя) OK: Перейдите к следующему шагу	Загрузите бумагу. Нажмите клавишу [OK] и перейдите к следующему шагу. • Для выбора другого устройства подачи выберите [Выберите бумагу]. • Для печати на бумаге, в настоящее время находящейся в устройстве подачи, выберите [Продолж. без изм.]
Закройте автоподатчик оригиналов	Открыт автоподатчик оригиналов	Откройте и закройте автоподатчик оригиналов
Закройте крышку автопод. оригиналов	Открыта верхняя крышка автоподатчика оригиналов	Откройте и закройте крышку автоподатчика оригинало
Закройте переднюю крышку	Открыта передняя крышка	Откройте и закройте переднюю крышку
Закройте правую крышку #	Открыта какая-либо крышка	Откройте и закройте крышку, обозначенную на экране
Замятие бумаги. (DP) ↑↓ (отображается попеременно) Проверьте (B)(C) в крышке DP	В автоподатчике произошло замятие бумаги.	См. Устранение замятия бумаги в Руководстве по эксплуатации и извлеките замятую бумагу
Замените МК	Необходимо производить замену деталей комплекта техобслуживания MK-4105 (ремкомплекта) каждые 150 000 страниц печати.	Данная операция должна производиться специалистом. Обратитесь к представителю сервисной службы (тел. в Минске +375 17 291-28-24)
Замятие	Произошло замятие бумаги в кассете или универсальном лотке	См. Устранение замятия бумаги и извлеките замятую бумагу
Извлеките оригиналы из автоподатчика	Для продолжения работы необходимо извлечь оригиналы из автоподатчика оригиналов	Извлеките оригиналы из автоподатчика оригиналов
Кабель USB был отключен	Кабель USB не подключен	Нажмите клавишу [OK] и подключите кабель USB
ПК выключен	Нажмите клавишу [OK] и включите ПК
Не удается найти KYOCERA Client Tool	Нажмите клавишу [OK] и откройте KYOCERA Client Tool на ПК
Макс. к-во сканируемых страниц	Превышен предел сканирования	Дальнейшее сканирование невозможно. Задание отменено. Нажмите клавишу [OK]
Мало тонера. (Зам., когда законч.)	Скоро понадобится заменить контейнер с тонером	Получите новый контейнер с тонером TK-4105. Внимание! Когда заканчивается тонер аппарат перестает печатать
Не оригинальный тонер	Установлен контейнер с тонером не марки Kyocera	Производитель не несет ответственности за повреждения, вызванные использованием неоригинального тонера. Мы рекомендуем использовать исключительно оригинальные контейнеры с тонером TK-4105. . Если нужно использовать установленный в настоящее время контейнер с тонером, нажмите *одновременно* и удерживайте клавиши [OK] и [Стоп] в течение не менее 3 с.
Неверный ид. уч. зап. Задание отменено	Указан неверный идентификатор учетной записи при внешней обработке задания. Задание отменено	Нажмите клавишу [OK]
Невозможна двусторонняя печать на этой бумаге	Не возможна печать на бумаге выбранного формата или типа	Нажмите клавишу [OK] и перейдите к следующему шагу: • Для выбора другого устройства подачи выберите пункт [Выберите бумагу]. • Чтобы печатать, не используя функцию двусторонней печати, выберите пункт [Продолж. без изм.].
Недостаточно памяти. Невозможно начать выполнение задания	Невозможно начать выполнение задания	Повторите попытку позже
Ограничено алгоритмом учета заданий(Печать)	Задание отменено, поскольку его выполнение ограничено функцией учета заданий	Нажмите клавишу [OK]
Ограничено алгоритмом учета заданий(Сканер)	Задание отменено, поскольку его выполнение ограничено функцией учета заданий	Нажмите клавишу [OK]
Очистите сканер	Произошло загрязнение сканера	Очистите щелевое стекло с помощью чистящей салфетки, поставляемой вместе с автоподатчиком оригиналов.
Ошибка. Выключить	—	Отключите и снова включите аппарат с помощью выключателя питания
Память переполнена	Невозможно продолжить выполнение задания из-за отсутствия свободной памяти	Измените разрешение печати с Быстр1200 до 600 dpi. См. Printer Driver User Guide
Память сканера переполнена	Дальнейшее сканирование невозможно из-за нехватки памяти сканера.	Для отмены задания нажмите [OK]
Перезагрузка печати. Задание отменено	Предупреждение. Недостаточно памяти принтера. Задание отменено	Нажмите клавишу [OK]
Превышено ограничение учета заданий	Превышено число распечаток из-за ограничения алгоритмом учета заданий. Достигнут предел печати	Это задание отменено. Нажмите клавишу [OK]
Уст.другую кассету	Выбрано «Сдвиг»	Для использования сдвига необходимо загрузить в другой лоток бумагу такого же формата, что и в выбранном устройстве подачи, но в другой ориентации
Установите все оригиналы обратно и нажмите клавишу [Старт].	Возникает при печати двусторонних документов в режиме ручной двусторонней печати	Извлеките оригиналы из автоподатчика оригиналов, расположите их в первоначальном порядке и положите обратно. Нажмите клавишу [OK], чтобы возобновить печать. Для отмены задания нажмите [Стоп]
Установлен неизвестный тонер. ПК	Региональная спецификация контейнера с тонером не соответствует спецификации аппарата	Установите оригинальный контейнер с тонером Замените контейнер с тонером TK-4105

Источник

When a transmission error occurs, one of the following error codes is recorded in the TX/RX Result Report and

Activity Report.

NOTE:

If an error occurs during V34 communication, the U in the error codes is replaced by an E.

Error Code

Busy

CANCELED

U00300

U00420 — U00462

U00600 — U00690

U00700

U00800 — U00810

U00900 — U00910

U01000 — U01092

U01100 — U01199

U01400

U01500

U01600

U01700 — U01720

Possible Cause/Action

Failed to establish connection with the recipient

despite auto redialing the preset number of times.

Send again.

Transmission was canceled due to an action to

cancel transmission.

Reception was canceled due to an action to

cancel reception.

Paper depletion occurred at the recipient

machine. Check with the recipient.

Reception was canceled because of mismatching

of communication features with the sender

machine although the line connection was

established.

Communication was stopped due to the machine

failure. Send or receive again.

Communication was stopped due to failure on the

part of the sender or recipient machine.

Page(s) not sent correctly. Send again.

Page(s) not received correctly. Ask the sender to

resend.

Communication error occurred during

transmission. Send again.

Communication error occurred during reception.

Ask the sender to resend.

Failed to establish communication with the sender

or recipient machine because dialing registered

for a push line system was used in a pulse line

system.

Communication error occurred during high-speed

transmission. Send again.

Communication error occurred during reception of

high-speed transmission. Ask the sender to

reduce the transmission speed and send again.

Communication error occurred during high-speed

transmission. Send again.

Appendix-11

Источник

Коды ошибок для аппаратов KM-1500 / 1505 / 1510 / 1810 / 1525 / 1530 / 2030 / 1620 / 2020 / 1635 / 2035 / 1650 / 2050 / 2550 / 2530 / 3530 / 3035 / 4035 / 5035 / 4230 / 5230 / 6230 / 4530 / 5530 / 6330 / 7530 / 6030 / 8030, FS-1018 / 1118 (KM-1820)

0030 Fax control PWB system problem

0070 Fax control PWB incompatibility detection problem

0100 Backup memory read/write problem (main board)

0110 Backup memory data problem (main board)

0120 Drum EEPROM read/write problem (для 2550)

0130 Backup memory read/write problem (main PCB EEPROM) (для 1650/2050/2550)

0140 Backup memory data problem (main PCB EEPROM) (для 1650/2050/2550)

0150 Backup memory read/write problem (engine board)

0160 Backup memory data problem (engine board)

0170 Accounting count problem

0180 Machine number mismatch

0210 Communication problem between the main board and engine board (для KM-1500/1620/2020/1635/2035/1650/2050/2550/6030/8030, FS-1018/1118)

Communication problem between the main board and operation board (для KM-1525/1530/2030/2530/3530/6230/4530/5530/6330/7530)

0240 Printer board PWB communication problem

0250 Scanner network board communication problem

0280 Communication problem between the fax control PWB and main PWB

0320 Side deck communication problem

0340 Finisher communication problem

0410 Optional DP communication problem

0420 Optional first paper feeder communication problem

Large paper deck /paper feed desk communication problem /Side deck communication problem

0440 Finisher communication problem

0450 Mailbox communication problem

0470 Switchback unit communication problem

0500 Optional second paper feeder communication problem

0510 Optional third paper feeder communication problem

0600 DIMM problem (для 2530/3530)

0610 Bitmap (DIMM) problem

0620 Memory input interface problem

0630 DMA problem

0640 Hard disk drive problem

0800 Image processing problem (JAM05 is detected twice)

0820 Fax control PCB CG ROM checksum error

0830 Flash ROM program area checksum error

0860 Fax control PCB software switch checksum error

0870 Fax control PWB to main PWB high capacity data transfer problem

0880 Fax control PWB program archive problem

0890 Fax control PCB CG font archive problem

0900 Fax software incompatibility detection problem

0920 Fax file system error

0960 Developer EEPROM read/write problem (для 2550/6030/8030)

1000 Exposure lamp problem

1010 Lift motor 1 error

1020 Lift motor 2 error

1030 Lift motor 3 error

1040 Lift motor 4 error

1100 Paper deck motor 1 problem [Drawer 3]

1110 Paper deck motor 2 problem [Drawer 4]

1120 Deck right lift position problem

1130 Deck left lift position problem

1140 Side deck lift motor (going up) problem

1150 Side deck lift motor (going down) problem

1160 Large paper deck (paper feed desk) sequence problem

1170 Large paper deck (paper feed desk) incorrect type problem

2000 Main motor problem

Image forming motor problem (для 6230/4530/5530/6330/7530)

2500 Paper feed motor problem

2550 Paper conveying motor problem (для 4530/5530)

2600 Deck conveying motor /desk drive motor problem

2640 Side deck drive motor problem

3100 Scanner carriage problem

3200 Exposure lamp problem

3300 Optical system (AGC) problem

4000 Polygon motor synchronization problem

4010 Polygon motor steady-state problem

4100 BD initialization (A) problem

4110 BD initialization (B) problem

4200 BD steady-state problem

5100 Main charger problem

5110 Transfer/separation high voltage problem

5300 Broken cleaning lamp wire

5500 Drum surface potential sensor problem 1

5510 Drum surface potential sensor problem 2

5600 Drum surface potential problem 1

5610 Drum surface potential problem 2

6000 Broken fixing heater wire

6020 Abnormally high fixing unit thermistor temperature

6030 Broken fixing unit thermistor

6050 Abnormally low fixing unit thermistor temperature

6100 Broken fixing heater wire

6200 Abnormally low fixing unit thermistor temperature

6300 Abnormally high fixing unit thermistor temperature

6400 Zero-crossing signal problem

6410 Fixing unit connector insertion problem

6420 Fixing fuse cut problem

6420 Broken fixing unit thermistor wire

7100 Toner sensor problem

7300 Broken external temperature thermistor wire (для KM-1505/1510/1810/4230/5230/6230)

Toner sensor problem/ Toner hopper problem (для KM-2530/3530/3035/4035/5035/6230/4530/5530/6330/7530/6030/8030)

7310 Short-circuited external temperature thermistor

7400 Image formation unit connector insertion problem

Developing unit connector insertion problem (для 2550)

7410 Drum unit connector insertion problem

7750 Drum type mismatch problem A (для 1635/2035)

7760 Drum type mismatch problem B (для 1635/2035)

7800 Broken external temperature thermistor

7810 Short-circuited external temperature thermistor

KM-1500, FS-1018/1118 (KM-1820)

0220 Communication problem between the main board and operation board (для 1018/1118)

F— Controller system error (для 1018/1118)

F010 ROM checksum error (для 1118)

F012 ROM checksum error (для 1118)

7980 Waste toner reservoir overflow problem (when the total number of copies is less than 100 thousand sheets)

7990 Waste toner reservoir overflow problem (when the total number of copies is 100 thousand sheets or more)

KM-1505/1510/1810/1525/1530/2030

0210 Printer board communication problem (для 1505/1510/1810)

0400 DIMM problem

0410 Bitmap problem

0430 DMA problem

1040 Optical system problem (AGC)

Kyocera-Mita 3035/4035/5035

0100 Operation unit PCB backup memory read/write error

0110 Operation unit PCB backup memory data problem

0210 MMI communication problem

0320 Energy save communication problem

7450 Image formation unit fuse cut problem

Kyocera Mita 4230/5230

0010 Memory copy PCB 1 communication problem

0030 Memory copy PCB 2 communication problem

0100 RAM/ROM problem

0220 Communication problem between the engine PCB and main PCB

0230 Scanner communication problem

0260 Memory copy PCB 1 communication problem

0320 Large paper deck communication problem /Paper feed desk communication problem

0360 Memory copy PCB 2 communication problem

0370 Communication microcomputer problem

1040 Optical system problem (AGC)

2100 Paper conveying motor problem

2200 Side registration motor problem

2300 Paper feed motor problem

2310 Desk drive motor problem

2410 Upper lift motor problem

2420 Lower lift motor problem

2430 Upper desk lift motor problem

2440 Lower desk lift motor problem

3320 Scanner watchdog problem

3400 Original detection position problem

7400 Toner hopper problem

9200 Deck paper conveying motor problem

9210 Paper deck motor 1 problem

9220 Paper deck motor 2 problem

9230 Right lift position problem

9240 Left lift position problem

Kyocera-Mita 6030/8030

0060 Main PWB type mismatch error

0130 Backup memory (EEPROM) device problem

0140 Backup memory (EEPROM) data problem

0220 Scanner communication problem

0330 Relay board communication problem

0460 Duplex unit communication problem

0470 Sheet inserter communication problem (optional document finisher)

0500 Paper feed unit communication error (cassette 1 and 2)

0510 Paper feed unit communication error (cassette 3 and 4)

0700 Side feeder EEPROM error (optional side feeder)

0750 Document finisher EEPROM error

0970 Cleaning unit EEPROM error

1200 Duplex side registration motor error

2100 Developing motor error

2200 Drive motor error

2300 Fuser motor error

2550 Transfer motor error

3210 CIS lamp problem

3310 Optical system (AGC) problem (DP)

3500 Communication error between scanner and SHD

3900 Backup memory read/write error (scanner PWB)

3910 Backup memory read/write error (scanner PWB)

4120 BD initialization (C) problem

7200 Broken drum thermistor wire

7210 Shorted drum thermistor

9040 DP lift motor going up error

9050 DP lift motor going down error

9060 DP EEPROM error

9070 Communication problem between DP and SHD

9080 Communication problem between DP and CIS

Kyocera Mita 6230

0010 Memory PCB communication problem

0100 RAM/ROM problem

0260 Memory copy PCB 1 communication problem

0350 Mailbox communication problem

0370 Communication microcomputer problem

0380 Hard disk problem

0390 DIMM problem

1040 Optical system problem (AGC)

2100 Drive motor problem / Paper conveying motor problem

2200 Paper feed motor problem

2300 Large paper deck right lift motor problem

2310 Large paper deck left lift motor problem

2420 Upper lift motor problem

2430 Lower lift motor problem

6500 Broken fixing unit thermistor wire

7200 Broken drum thermistor wire

7210 Shorted drum thermistor

7220 Broken drum heater wire

KyoceraMita 6330/7530

1060 Large paper deck left lift motor problem

2550 Drive motor problem

7520 Shorted drum thermistor

7530 Broken drum thermistor wire

Ошибки финишеров

8010 Finisher paper conveying motor problem

8030 Finisher (upper) paper conveying belt problem

8140 Finisher tray elevation motor problem /Main tray problem

8170 Finisher front side registration motor problem

8180 Finisher rear side registration motor problem

Finisher rear jogger motor problem (для 4230/5230)

8190 Finisher trailing edge registration motor problem

8210 Finisher stapler motor problem

8220 Finisher rear stapler problem

8300 Document finisher centerfold unit communication problem

8310 Document finisher centerfold unit side registration guide problem

8320 Document finisher centerfold unit centering plate problem

8330 Document finisher centerfold blade problem

Ошибки финишеров KM-2530/3530/3035/4035/5035

8300 Booklet stitcher paper ejection motor problem

8310 Booklet stitcher elevation motor problem

8320 Booklet stitcher rear jog motor problem

8330 Booklet stitcher front jog motor problem

8340 Booklet stitcher staple motor problem

8350 Booklet stitcher batch processing motor problem

8360 Booklet stitcher stapler shift motor problem

8370 Booklet stitcher paddle motor problem

8380 Booklet stitcher folding problem

8390 Booklet stitcher backup RAM data problem

8400 Booklet stitcher incorrect type problem

8410 Booklet stitcher punch motor problem

8420 Booklet stitcher shift motor problem

8430 Booklet stitcher punch communication problem

8440 Booklet stitcher punch sensor problem

8450 Booklet stitcher side punch sensor problem

8460 Booklet stitcher punch backup RAM data problem

8470 Booklet stitcher punch dust sensor problem

8480 Booklet stitcher broken punch power source wire problem

8500 Mailbox drive motor problem

Ошибки финишера KM-6230

8180 Finisher rear jogger motor problem

8310 Booklet stitcher paper ejection motor problem

8320 Booklet stitcher elevation motor problem

8330 Booklet stitcher jog motor problem

8340 Booklet stitcher staple motor problem

8350 Booklet stitcher stapler unit shift motor problem

8360 Booklet stitcher stack level detection sensor problem

8370 Booklet stitcher punch motor problem

8380 Booklet stitcher punch shift motor problem

8390 Booklet stitcher swing motor problem

8400 Booklet stitcher backup RAM data problem

8410 Booklet stitcher punch unit backup RAM data problem

8420 Booklet stitcher positioning plate motor problem

8430 Booklet stitcher folding motor problem

8440 Booklet stitcher guide motor problem

8450 Booklet stitcher jog motor problem

8460 Booklet stitcher rear staple motor problem

8470 Booklet stitcher front staple motor problem

8480 Booklet stitcher thrust motor problem

8490 Booklet stitcher communication error

Ошибки финишеров KM-6330/7530/6030/8030

8000 Document finisher incorrect type problem (для 6330/7530)

8020 Finisher punch motor problem

8040 Finisher lower paper conveying belt problem

8150 Finisher multi job tray problem

8170 Front upper side-registration guide problem

8180 Finisher rear upper side-registration guide problem

8190 Finisher lower side-registration guide problem

8220 Finisher front clincher problem

8230 Finisher rear stapler problem

8240 Finisher rear clincher problem

Источник

В большинстве случаев у аппаратов Kyocera код ошибки отображается на дисплее, в остальных случаях тип ошибки зависит от последовательности и количества миганий индикаторов. Если Ваш копировальный аппарат, МФУ или принтер Kyocera выдал на дисплее некий код, то узнать причину, описание возникновения ошибки, а так же в каком узле аппарата стоит искать проблему.

Код ошибки Описание ошибки Причина ошибки 0100 Backup memory device error Defective flash memory. Defective main PWB. 0110 Backup memory data error Defective flash memory. Defective main PWB. 0120 MAC address data error For data in which the MAC address is invalid. Defective flash memory. Defective engine PWB. 0170 Billing counting error Defective control PWB. Data damage of control PWB EEPROM (U17). 0420 Paper feeder communication error Communication error between control PWB and optional paper feeder. Improper installation paper feeder. Defective harness between control PWB (YC30) and paper feeder interface connector, or improper connector insertion. Defective control PWB. Defective harness between PF main PWB (YC5) and paper feeder interface connector, or improper connector insertion. 1010 Lift motor error During driving the lift motor, a motor overcurrent signal is detected for 5 s. This error is detected five times successively. Defective bottom plate elevation mechanism in the cassette. Defective connector cable or poor contact in the connector. Defective drive transmission system of the lift motor. Defective lift motor. Defective engine PWB or connect-R PWB. 1140 Lift motor ascent error *40/42 and 45/47 ppm printers (EUR/ USA model) only Optional bulk paper feeder’s tray top position sensor does not turn on. Lift motor lock error occurred 3 times. Defective bulk paper feeder’s tray top position sensor. Defective harness between bulk paper feeder’s tray top position sensor and main PWB (YC6), or improper connector insertion. Defective bulk paper feeder’s main PWB. 1150 Lift motor descent error *40/42 and 45/47 ppm printers (EUR/ USA model) only Optional bulk paper feeder’s tray bottom position sensor does not turn on. Lift motor lock error occurred 3 times. Defective bulk paper feeder’s tray bottom position sensor. Defective harness between bulk paper feeder’s tray bottom position sensor and main PWB (YC8), or improper connector insertion. Defective bulk paper feeder’s main PWB. 2000 Main motor error The main motor ready input is not given for 2 s during the main motor is ON. Defective harness between main motor (CN1) and control PWB (YC17), or improper connector insertion. Defective drive transmission system of the main motor. Defective main motor. Defective control PWB. 2200 Drum motor steady-state error The drum motor ready input is not given for 2 s during the drum motor is ON. Defective connector cable or poor contact in the connector. Defective drive transmission system of the drum motor. Defective drum motor. Defective engine PWB. 4000 Polygon motor (laser scanner unit) error The polygon motor ready input is not given for 6 s during the polygon motor is ON. Defective harness between polygon motor and control PWB (YC10), or improper connector insertion. Defective laser scanner unit. Defective control PWB. 4200 Laser output (pin photo sensor) error The pin photo signal (PDN) is not output within a specified time after the polygon motor ready signal (POLRDYN) becomes ready (L level). Defective harness between PD PWB (YC1) and main PWB (YC16), or improper connector insertion. Defective APC PWB. Defective PD PWB. Defective main PWB. 5100 Short-circuited main charger output Five pages have been printed with the main charger output short-circuited. Drum unit installed incorrectly. Engine PWB installed incorrectly. Defective engine PWB. 6000 Broken fuser heater wire The temperature does not reach 100°C/212°F after the fuser heater has been turned on continuously for 30 s. The temperature does not rise by 1°C/1.8°F after the fuser heater lamp has been turned on continuously for 15 s during warm-up or at standby.(Only when the detection temperature is less than 200°C.) Poor contact in the fuser thermistor 1 connector terminals. Fuser thermistor 1 installed incorrectly. Thermal cutout triggered. Fuser heater lamp installed incorrectly. Broken fuser heater lamp wire. 6020 Abnormally high fuser thermistor temperature Fuser thermistor detects abnormally temperature. Shorted fuser thermistor. Defective control PWB. 6030 Broken fuser thermistor wire Input from fuser thermistor is 0 (A/D value). Poor contact in the fuser thermistor connector terminals. Broken fuser thermistor wire. Fuser thermistor installed incorrectly. Fuser thermal cutout triggered. Fuser heater lamp installed incorrectly. Broken fuser heater lamp wire. 6120 Abnormally high fuser thermistor 1 temperature The temperature of the fuser thermistor 1 detects 240°C/464°F or more continuously for 3 s. Shorted fuser thermistor 1. Defective engine PWB. 6130 Broken fuser thermistor 1 wire Input from fuser thermistor 1 is less than 1 (A/D value) for more than 1 s. Poor contact in the fuser thermistor 1 connector terminals. Broken fuser thermistor 1 wire. Fuser thermistor 1 installed incorrectly. 6400 Zero cross signal error The zero cross signal does not reach the control PWB for specified time. Defective harness between high voltage PWB (YC202) and control PWB (YC23), or improper connector insertion. Defective connection between power source PWB (YC103) and high voltage PWB (YC201). Defective power source PWB. Defective control PWB. 7000 Toner motor lock error During driving the toner motor, a motor overcurrent signal is detected for 5 s. Lump of toner inside toner container. Defective drive transmission system of the toner motor. Defective toner motor. Defective engine PWB. 7410 Drum unit non- installing error The drum unit is not installed or not installed properly. The drum PWB EEPROM does not communicate normally. The drum unit is not installed. Defective connector cable or poor contact in the connector. Defective drum PWB EEPROM. Defective engine PWB. F000 Main PWB — operation panel PWB communication error Defective main PWB. Defective operation panel PWB. F010 Main PWB checksum error Defective main PWB. F020 Main PWB RAM checksum error Defective main memory (RAM) on the main PWB. Defective expanded memory (DIMM). F040 Main PWB — engine PWB communication error Defective main PWB. Defective engine PWB. F041 Main PWB — scanner communication error Defective main PWB. F050 Engine ROM checksum error Defective engine PWB. F051 Scan engine ROM checksum error Defective engine PWB.

Код ошибки	Описание
0030	Fax control PWB system problem
0070	Fax control PWB incompatibility detection problem
0100	Backup memory read/write problem (main board)
0110	Backup memory data problem (main board)
0120	Drum EEPROM read/write problem (для 2550)
0130	Backup memory read/write problem (main PCB EEPROM) (для 1650/2050/2550)
0140	Backup memory data problem (main PCB EEPROM) (для 1650/2050/2550)
0150	Backup memory read/write problem (engine board)
0160	Backup memory data problem (engine board)
0170	Accounting count problem
0180	Machine number mismatch
0210	Communication problem between the main board and engine board (для KM-1500/1620/2020/1635/2035/1650/2050/2550/6030/8030, FS-1018/1118)
Communication problem between the main board and operation board (для KM-1525/1530/2030/2530/3530/6230/4530/5530/6330/7530)
0240	Printer board PWB communication problem
0250	Scanner network board communication problem
0280	Communication problem between the fax control PWB and main PWB
0320	Side deck communication problem
0340	Finisher communication problem
0410	Optional DP communication problem
0420	Optional first paper feeder communication problem
Large paper deck /paper feed desk communication problem /Side deck communication problem
0440	Finisher communication problem
0450	Mailbox communication problem
0470	Switchback unit communication problem
0500	Optional second paper feeder communication problem
0510	Optional third paper feeder communication problem
0600	DIMM problem (для 2530/3530)
0610	Bitmap (DIMM) problem
0620	Memory input interface problem
0630	DMA problem
0640	Hard disk drive problem
0800	Image processing problem (JAM05 is detected twice)
0820	Fax control PCB CG ROM checksum error
0830	Flash ROM program area checksum error
0860	Fax control PCB software switch checksum error
0870	Fax control PWB to main PWB high capacity data transfer problem
0880	Fax control PWB program archive problem
0890	Fax control PCB CG font archive problem
0900	Fax software incompatibility detection problem
0920	Fax file system error
0960	Developer EEPROM read/write problem (для 2550/6030/8030)
1000	Exposure lamp problem
1010	Lift motor 1 error
1020	Lift motor 2 error
1030	Lift motor 3 error
1040	Lift motor 4 error
1100	Paper deck motor 1 problem [Drawer 3]
1110	Paper deck motor 2 problem [Drawer 4]
1120	Deck right lift position problem
1130	Deck left lift position problem
1140	Side deck lift motor (going up) problem
1150	Side deck lift motor (going down) problem
1160	Large paper deck (paper feed desk) sequence problem
1170	Large paper deck (paper feed desk) incorrect type problem
2000	Main motor problem
Image forming motor problem (для 6230/4530/5530/6330/7530)
2500	Paper feed motor problem
2550	Paper conveying motor problem (для 4530/5530)
2600	Deck conveying motor /desk drive motor problem
2640	Side deck drive motor problem
3100	Scanner carriage problem
3200	Exposure lamp problem
3300	Optical system (AGC) problem
4000	Polygon motor synchronization problem
4010	Polygon motor steady-state problem
4100	BD initialization (A) problem
4110	BD initialization (B) problem
4200	BD steady-state problem
5100	Main charger problem
5110	Transfer/separation high voltage problem
5300	Broken cleaning lamp wire
5500	Drum surface potential sensor problem 1
5510	Drum surface potential sensor problem 2
5600	Drum surface potential problem 1
5610	Drum surface potential problem 2
6000	Broken fixing heater wire
6020	Abnormally high fixing unit thermistor temperature
6030	Broken fixing unit thermistor
6050	Abnormally low fixing unit thermistor temperature
6100	Broken fixing heater wire
6200	Abnormally low fixing unit thermistor temperature
6300	Abnormally high fixing unit thermistor temperature
6400	Zero-crossing signal problem
6410	Fixing unit connector insertion problem
6420	Fixing fuse cut problem
6420	Broken fixing unit thermistor wire
7100	Toner sensor problem
7300	Broken external temperature thermistor wire (для KM-1505/1510/1810/4230/5230/6230)
Toner sensor problem/ Toner hopper problem (для KM-2530/3530/3035/4035/5035/6230/4530/5530/6330/7530/6030/8030)
7310	Short-circuited external temperature thermistor
7400	Image formation unit connector insertion problem
Developing unit connector insertion problem (для 2550)
7410	Drum unit connector insertion problem
7750	Drum type mismatch problem A (для 1635/2035)
7760	Drum type mismatch problem B (для 1635/2035)
7800	Broken external temperature thermistor
7810	Short-circuited external temperature thermistor

Источник

Kyocera 2530 коды ошибок

А вот еще интересные материалы: