|
0 / 0 / 0 Регистрация: 23.12.2015 Сообщений: 13 |
|
|
1 |
|
|
23.12.2015, 10:17. Показов 977. Ответов 3
Сервер IBM X3650 m3 2,13 в нем стоит 15HDD и на одном из жестких дисков горит оранжевый индикатор, по панели это ошибка DASD, прошлый жесткий диск выходил из строя, поставили новый, а как его добавить в raid массив загадка, подскажите, что нужно делать поэтапно, я нуб.
__________________
0 |
|
Хитрая блондиночка $) 1470 / 985 / 399 Регистрация: 21.12.2015 Сообщений: 3,785 |
|
|
23.12.2015, 10:29 |
2 |
|
Дак ведь зайти при запуске компа в настройки RAID контроллера. Там есть опция добавления в массив.
1 |
|
0 / 0 / 0 Регистрация: 23.12.2015 Сообщений: 13 |
|
|
24.12.2015, 11:21 [ТС] |
3 |
|
Да, но есть вопрос при добавлении, не надо делать бекапы данных?*
0 |
|
1376 / 508 / 99 Регистрация: 11.03.2015 Сообщений: 1,735 |
|
|
24.12.2015, 14:27 |
4 |
|
Dett,
1 |
Troubleshooting
Problem
The DASD Operator Panel Light Emitting Diode (LED) and Serial Attached SCSI (SAS) hard disk LED may not illuminate when, even though a long write error has occurred and the disk has been flagged as inoperable, the Redundant Array of Independent Disks (RAID) array will be noted as CRITICAL in ServeRAID Manager.
Resolving The Problem
Source
RETAIN tip: H195714
Symptom
The DASD Operator Panel Light Emitting Diode (LED) and Serial Attached SCSI (SAS) hard disk LED may not illuminate when, even though a long write error has occurred and the disk has been flagged as inoperable, the Redundant Array of Independent Disks (RAID) array will be noted as CRITICAL in ServeRAID Manager.
Affected configurations
The system may be any of the following IBM servers:
- System x3755, type 7163, any model
- System x3755, type 8877, any model
- System x3550, type 1013, any model
- System x3550, type 1913, any model
- System x3550, type 7978, any model
- System x3650, type 1914, any model
The system is configured with one or more of the following IBM Options:
- ServeRAID-8k SAS Controller, Option 25R8064
- ServeRAID-8k-l SAS Controller, Option 39R8729
This tip is not software specific.
- The 11835 firmware for the ServeRAID Controller is affected.
Workaround
Update the 8k or 8k-l ServeRAID controller firmware/Basic Input/Output System (BIOS) to level 15427 or later.
Additional information
When the RAID controller is shutdown and the RAID array is in OKAY status and then rebooted with a disk that now has long read or long write errors present, the media error handling algorithm was not informing the I2C bus accordingly. The ServeRAID firmware is now more capable of handling media errors correctly informing the I2C bus accordingly.
Document Location
Worldwide
Operating System
System x:Operating system independent / None
System x Hardware Options:Operating system independent / None
[{«Type»:»HW»,»Business Unit»:{«code»:»BU016″,»label»:»Multiple Vendor Support»},»Product»:{«code»:»HW318″,»label»:»System x->System x3550″},»Platform»:[{«code»:»PF025″,»label»:»Platform Independent»}],»Line of Business»:{«code»:»»,»label»:»»}},{«Type»:»HW»,»Business Unit»:{«code»:»BU016″,»label»:»Multiple Vendor Support»},»Product»:{«code»:»HW319″,»label»:»System x->System x3650″},»Platform»:[{«code»:»PF025″,»label»:»Platform Independent»}],»Line of Business»:{«code»:»»,»label»:»»}},{«Type»:»HW»,»Business Unit»:{«code»:»BU016″,»label»:»Multiple Vendor Support»},»Product»:{«code»:»HW324″,»label»:»System x->System x3755″},»Platform»:[{«code»:»PF025″,»label»:»Platform Independent»}],»Line of Business»:{«code»:»»,»label»:»»}},{«Type»:»HW»,»Business Unit»:{«code»:»BU016″,»label»:»Multiple Vendor Support»},»Product»:{«code»:»QU01XHQ»,»label»:»System x Hardware Options->ServeRAID->ServeRAID 8x->39R8729″},»Platform»:[{«code»:»PF025″,»label»:»Platform Independent»}],»Line of Business»:{«code»:»»,»label»:»»}},{«Type»:»HW»,»Business Unit»:{«code»:»BU016″,»label»:»Multiple Vendor Support»},»Product»:{«code»:»QU01YVY»,»label»:»System x Hardware Options->ServeRAID->ServeRAID 8x->25R8064″},»Platform»:[{«code»:»PF025″,»label»:»Platform Independent»}],»Line of Business»:{«code»:»»,»label»:»»}}]
The following table provides an abbreviated list of the error codes that might appear
during POST. See the Problem Determination and Service Guide on the IBM
System x Documentation CD for more information about the POST error codes. To
check for updated technical information, go to http://www.ibm.com/systems/support/,
select System x3650, click the Install and use tab, and click Product
documentation.
60
IBM System x3650 Type 7979: Installation Guide
Table 7. Abbreviated list of POST error messages
POST
Failing device or
message
problem found
161
The real-time clock
battery has failed.
162
A device configuration
has changed.
163
The time of day has
not been set.
289
A failing DIMM was
disabled.
301, 303
Keyboard and
keyboard controller
1810
PCI device error
1962
POST could not find
an operating system.
00019xxx
Microprocessor x is
not functioning or
failed the built-in
self-test.
012980xx
Data for
microprocessor x
012981xx
Suggested action
1. Reseat the battery.
2. Replace the battery or call for service.
v Run the Configuration/Setup Utility program,
select Load Default Settings, and save the
settings.
v Make sure that optional devices are turned on
and installed correctly.
Run the Configuration/Setup Utility program and set
the date and time.
Make sure that the DIMMs are supported by the
server and that they are installed correctly.
Make sure that the keyboard cable is connected
and that nothing is resting on the keyboard keys.
Make sure that all PCI adapters are installed
correctly. In the Configuration/Setup Utility program,
make sure that all PCI devices are enabled.
Disable option ROMs and integrated devices that
are not needed and set the PCI device boot priority
to ensure that the boot device option ROM is able
to load.
Install an operating system.
Make sure that microprocessor x is installed
correctly. (Trained service technician only) If the
problem remains, replace microprocessor x.
Download and install the latest level of BIOS code.