Distributed com ошибка 10010

Привет
MikAndr,

С вариантами исправления такой ошибки,можно ознакомиться по этой ссылке:http://social.technet.microsoft.com/Forums/en-US/winservermanager/thread/f7211cff-9221-4cc5-aea8-16bd7797a93c/

Можно проделать следующие шаги,как указанно:

1. Run Regedit to launch Registry Editor.
2. Navigate to [HKEY_LOCAL_MACHINESOFTWAREClassesAppID{B292921D-AF50-400c-9B75-0C57A7F29BA1}].
3. Right click on {84AC6BE7-8CF2-4E67-A80E-32ACD3D7C381} and select Permissions.
4. Click Advanced button and switch to Owner tab.
5. Highlight Administrators group and click OK
6. Highlight SYSTEM and Administrators group, check the Full Control boxes under Allow and click OK.
7. Run dcomcnfg to launch Component Services.
8. Expand ComputersMy ComputerDCOM ConfigNAP Agent Service.
9. Right click NAP Agent Service and choose Properties.
10. Switch to Security tab, choose Customize in Launch and Activation permissions label.
11. Highlight SYSTEM, check all the boxes under Allow and click OK to test the issue.

Или

1. In the %windir%/registration folder, make sure that the Everyone group has Read permissions.

2. In the %windir%/registration folder, make sure that the SYSTEM account has Full Control permissions.

3. In the %windir%/registration folder, make sure that the Administrators group has Full Control permissions.

4. In the advanced security properties of the .clb files in the %windir%/registration folder, make sure that the Allow inheritable auditing entries from the parent to propagate to this object and all objects. Include these with entries explicitly defined
here option is selected.
5. Make sure that the Everyone group has one of the following permissions:
•Traverse permissions (“List Folder Contents”) on all parent directories, including %systemdrive%, %windir%, and %windir%registration

•The Bypass traverse checking user right
To assign the Bypass traverse checking user right to the Everyone group, follow these steps:

1. Click Start, click Run, type gpedit.msc, and then click OK.

2. Expand Computer Configuration, expand Windows Settings, expand Security Settings, expand Local Policies, and then expand User Rights Assignment.

3. Right-click Bypass traverse checking, and then click Properties.
4. Click Add User or Group.
5. Type Everyone, and then click OK.

Note: If you receive a message that an object named «Users» cannot be found, click Object Types, click to select the Groups check box, and then click OK two times.

For more troubleshooting suggestions, please also refer to the following links:

Если варианты выше не помогут Вам,то можете ознакомитья с другими вариантами »траблшутинга» по этим ссылкам:

DistributedCOM Error ID 10010 
http://social.technet.microsoft.com/Forums/en-SG/winservergen/thread/77b1db1d-f186-4515-8f7d-2241942eb9b7

Event ID 10010 — COM General Functionality
http://technet.microsoft.com/en-us/library/cc774175(WS.10).aspx

Event ID: 10010 Source: DCOM
http://eventid.net/display.asp?eventid=10010&eventno=508&source=DCOM&phase=1

Надеюсь был полезен.

• Помечено в качестве ответа

  22 февраля 2013 г. 10:10

• Remove From My Forums

• Question

• There are reports of the above error in event viewer when a certain (current version) driver is installed.  To give more details it’s only happens during shut down (if you look at the time stamp and take note of the exact time the PC shuts down). 
  This only started happening with the current driver release.  Once the driver is uninstalled the problem ceases.  When using an older driver the problem doesn’t show up in the event viewer.  Is there anything a user can do to fix this in Win7? 
  Or is it a problem with the driver itself?

  Log Name: System

  Source: Microsoft-Windows-DistributedCOM

  Date: 4/28/2011 6:42:26 AM

  Event ID: 10010

  Task Category: None

  Level: Error

  Keywords: Classic

  User: N/A

  Computer:

  Description:

  The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.

  Event Xml:

  <Event xmlns=»http://schemas.microsoft.com/win/2004/08/events/event»>

  <System>

  <Provider Name=»Microsoft-Windows-DistributedCOM» Guid=»{1B562E86-B7AA-4131-BADC-B6F3A001407E}» EventSourceName=»DCOM» />

  <EventID Qualifiers=»49152″>10010</EventID>

  <Version>0</Version>

  <Level>2</Level>

  <Task>0</Task>

  <Opcode>0</Opcode>

  <Keywords>0x80000000000000</Keywords>

  <TimeCreated SystemTime=»2011-04-28T11:42:26.000000000Z» />

  <EventRecordID>49025</EventRecordID>

  <Correlation />

  <Execution ProcessID=»0″ ThreadID=»0″ />

  <Channel>System</Channel>

  <Security />

  </System>

  <EventData>

  <Data Name=»param1″>{E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E}</Data>

  </EventData>

  </Event>

• Remove From My Forums

• Question

• There are reports of the above error in event viewer when a certain (current version) driver is installed.  To give more details it’s only happens during shut down (if you look at the time stamp and take note of the exact time the PC shuts down). 
  This only started happening with the current driver release.  Once the driver is uninstalled the problem ceases.  When using an older driver the problem doesn’t show up in the event viewer.  Is there anything a user can do to fix this in Win7? 
  Or is it a problem with the driver itself?

  Log Name: System

  Source: Microsoft-Windows-DistributedCOM

  Date: 4/28/2011 6:42:26 AM

  Event ID: 10010

  Task Category: None

  Level: Error

  Keywords: Classic

  User: N/A

  Computer:

  Description:

  The server {E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E} did not register with DCOM within the required timeout.

  Event Xml:

  <Event xmlns=»http://schemas.microsoft.com/win/2004/08/events/event»>

  <System>

  <Provider Name=»Microsoft-Windows-DistributedCOM» Guid=»{1B562E86-B7AA-4131-BADC-B6F3A001407E}» EventSourceName=»DCOM» />

  <EventID Qualifiers=»49152″>10010</EventID>

  <Version>0</Version>

  <Level>2</Level>

  <Task>0</Task>

  <Opcode>0</Opcode>

  <Keywords>0x80000000000000</Keywords>

  <TimeCreated SystemTime=»2011-04-28T11:42:26.000000000Z» />

  <EventRecordID>49025</EventRecordID>

  <Correlation />

  <Execution ProcessID=»0″ ThreadID=»0″ />

  <Channel>System</Channel>

  <Security />

  </System>

  <EventData>

  <Data Name=»param1″>{E10F6C3A-F1AE-4ADC-AA9D-2FE65525666E}</Data>

  </EventData>

  </Event>