2.1
2
Software
LC display
Description
1
Different syringe recognition
2
Different FP- and CMP condition
3
Rate of FP- and CMP different
4
Different function mode
5
Different rate of delivery
6
Different target volume
7
Different step volume (low)
8
Different motor steps
19
State/motor state
20
Invalid normal state
21
return from PlcMain
22
Unexpected reset
28
No sync at Plc_Down
29
No sync at Plc_On
30
Different CMP/FP mode ports
31
Invalid mode ports
32
Invalid variable values
33
Error in ROM test
34
Different software version
40
Unexpected interrupt
49
Faulty sensor sync
51
Motor on during reverse run
52
Step cumulation > 10 steps
53
Illegal setting of Mot_Ok
54
Different recognition of direction of rotation
55
Reverse polarity of motor
Table 2 — 1 (Part 1 of 2)
2 — 2
In case of a unit malfunction a continuous signal is activated, and
the function processor displays an alarm and an error code. The
error code of the control microprocessor can be queried with the
F button. Please state both error codes if you have any questions.
Acknowledge alarm and switch device off.
Device Alarms of the Function Processor
Perfusor® compact, 2.1 gb
OP Expert
Joined: May 2009 Posts: 127 |
Hi all, I have a problem with bbraun perfusor compact s!On a display appears symbol «key« and on other pump appears an error code 046! How can I reset them ?Does anyone have service manual for them ? Regards! |
| Recruitment / Jobs |
|
|
|
|
|
|
Joined: May 2009 Posts: 72
Scholar |
|
|
Scholar
Joined: May 2009 Posts: 72 |
Jevremco on the E046, the last pump I had was merely a case of fastening the syringe size potentiometer clip (Not at all in line with the error code index of the OEM)and re-calibrating the occlusion limit. If you don’t have the correct guages I would suggest you get in touch with Braun for a set. (I found using a generic set just didn’t cut the cake «so to speak» during a previous battle with a compact s)
keeping faith is old school….. |
|
|
|
|
Joined: Apr 2005 Posts: 371 Sage |
|
|
Sage Joined: Apr 2005 Posts: 371 |
Checking for DAC error as indicated in the manual. |
Loading…
Perfusor® compact S
Service-Manual
Version 2.1 english
0
This Service-Manual is valid for
This Service Manual is available under the following part number:
Languages of this Manual
The complete Service-Manual contains the following pages:
Perfusor® compact S (200 — 240 V) . . . . . . . . . . . . . . . 0871 4843
Perfusor® compact S, English . . . . . . . . . . . . . . . . . . . . 8713 9114
The Service Manual for this unit can be supplied in the following languages:
Perfusor® compact S, German . . . . . . . . . . . . . . . . . . . . 8713 9113 Perfusor® compact S, USA . . . . . . . . . . . . . . . . . . . . . . .8713 9115
Page 0-1 to page 0-10
Page 1-1 to page 1-4
Page 2-1 to page 2-8
Page 3-1 to page 3-14
Page 4-1 to page 4-18
Page 5-1 to page 5-8
Page 6-1 to page 6-2
Page 7-1 to page 7-2
Page 8-1 to page 8-6
Page 9-1 to page 9-2
Page 10-1 to page 10-2
Page 11-1 to page 11-2
Page A-1 to page A-2
|
0 — 2 |
Perfusor® compact S, 2.1 gb |
Table of Contents 0
|
Important Preliminary Remarks |
Service Work |
Page |
0 — 5 |
|
Technical Safety Checks |
Page |
0 — 5 |
|
|
Current Versions |
Page |
0 — 5 |
|
|
Revision Service |
Page |
0 — 5 |
|
|
Quality Management |
Page |
0 — 6 |
|
|
Checks and Repair |
Page |
0 — 6 |
|
|
Notes on ESD |
Page |
0 — 6 |
|
|
Spare Parts and Test Equipment |
Page |
0 — 7 |
|
|
Setting Off |
Page |
0 — 7 |
|
|
List of Abbreviations |
Page |
0 — 8 |
|
|
Contact Persons |
Technical Training |
Page |
0 — 9 |
|
Entry for Technical Training |
Page |
0 — 9 |
|
|
Ordering of Spare Parts and Test Equipment |
Page |
0 — 9 |
|
|
Service Hotline |
Page |
0 — 9 |
|
|
Return of Spare Parts and Test Equipment |
Page |
0 — 9 |
|
|
Safety Officer |
|||
|
(§ 30 MPG) |
Page |
0 — 9 |
|
|
Translation |
Page |
0 — 9 |
|
|
System Overview |
Physical Construction |
Page |
1 — 1 |
|
Function |
Page |
1 — 2 |
|
|
Accessories |
Page |
1 — 3 |
|
|
Software |
Approved Software Versions |
Page |
2 — 1 |
|
Version Display during Switch-On Test |
Page |
2 — 1 |
|
|
Extended Version Display during Switch-On Test |
Page |
2 — 2 |
|
|
Error Messages and Alarms |
Page |
2 — 3 |
|
|
Service Program |
Current Service Program |
Page |
3 — 1 |
|
Introduction |
Page |
3 — 1 |
|
|
Working with the Service Program |
Page |
3 — 2 |
|
|
What to Do if… (Troubleshooting) |
Page |
3 — 5 |
|
|
Menu Commands (Overview) |
Page |
3 — 7 |
|
|
Procedural Instructions for Inspection |
|||
|
after Operation of the Service Program |
Page |
3 — 11 |
|
|
Checklist after Operation of the Service Program |
Page |
3 — 13 |
|
|
Unit Elements |
Fundamental Repair Information |
Page |
4 — 1 |
|
Syringe Table and Quick Reference Guide |
Page |
4 — 4 |
|
|
Syringe Holder |
Page |
4 — 4 |
|
|
Unit Feet |
Page |
4 — 5 |
|
|
Battery Compartment Cover |
Page |
4 — 5 |
|
|
Snap-in Clip |
Page |
4 — 6 |
|
|
A-Module |
Page |
4 — 6 |
|
|
LS-Clip |
Page |
4 — 7 |
|
|
E-Module |
Page |
4 — 8 |
|
|
N-Module |
Page |
4 — 9 |
|
|
Housing Upper Part, Complete |
Page |
4 — 9 |
|
|
Carrying Handle |
Page |
4 — 10 |
|
|
Drive |
Page |
4 — 11 |
|
Perfusor® compact S, 2.1 gb |
0 — 3 |
|
Axial Positioner |
Page |
4 — 12 |
||
|
Drive Board |
Page |
4 — 12 |
||
|
Drive Head and Holder |
Page |
4 — 14 |
||
|
Clip |
Page |
4 — 17 |
||
|
Drive Head Housing |
Page |
4 — 18 |
||
|
Housing Bottom Part, Complete |
Page |
4 — 18 |
||
|
Checks after Repair |
Check List for Checks after Repair |
Page |
5 |
— 1 |
|
Visual Inspection |
Page |
5 |
— 2 |
|
|
Functional Inspection |
Page |
5 |
— 2 |
|
|
Electrical Safety |
Page |
5 |
— 8 |
|
|
Syringe / Syringe Selection |
Page |
5 |
— 8 |
|
|
Adhesive Label Factory Setting |
Page |
5 |
— 8 |
|
|
Maintenance |
Page |
6 |
— 1 |
|
|
Technical Safety Check TSC |
Page |
7 |
— 1 |
|
|
Procedural Instructions on the TSC |
Visual Inspection |
Page |
8 |
— 1 |
|
Functional Inspection |
Page |
8 |
— 2 |
|
|
Syringes |
Page |
8 |
— 3 |
|
|
Pressure Cut-Off |
Page |
8 |
— 3 |
|
|
Electrical Safety |
Page |
8 |
— 5 |
|
|
Accessories |
Page |
8 |
— 5 |
|
|
Test Equipment and Special Tools |
Page |
9 |
— 1 |
|
|
Spare Parts List |
Page |
10 |
— 1 |
|
|
Index |
Page |
11 |
— 1 |
|
|
Appendix |
Revision Service-Documentation |
Page |
A — 1 |
|
|
Current Information |
Page |
A — 1 |
|
0 — 4 |
Perfusor® compact S, 2.1 gb |
Important Preliminary Remarks 0
Service Work |
The present manual is for your information only. The possession of |
|
this manual does not authorize the performance of service work. |
|
|
Service tasks may only be executed by persons, who |
|
|
— have received appropriate training on the system from |
|
|
B. Braun |
|
|
— are included in the revision service |
|
|
— possess the necessary test equipment and mechanical aids, |
|
|
and |
|
|
— fulfill the personal requirements (training and knowledge). |
|
Technical Safety Checks |
The user is obliged to perform or to have performed the Technical |
|
Safety Checks on those medial products for which these checks |
|
|
have been prescribed by the manufacturer and to carry them out |
|
|
according to the indications of the manufacturer as well as the |
|
|
generally approved technical standards while adhering to the pe- |
|
|
riods stated (§ 6 MP BetreibV). |
|
|
B. Braun also recommends training on the Technical Safety |
|
|
Checks, or to perform at least the steps indicated in the current |
|
|
version of the manual, as: |
|
|
— the TSC requires that the instructions in the manuals are ob- |
|
|
served |
|
|
— the manuals are a reference for measurements |
|
|
— depending on the unit type, the Service Program must be |
|
|
called which may lead to a dangerous unit condition in case |
|
|
of inappropriate operation. Furthermore, a special service |
|
|
connector may be necessary. |
|
Current Versions |
This manual version corresponds to the state when the manual |
|
was written. B Braun reserves the right to make technical modifi- |
|
|
cations. The state of the revision is indicated by the index number |
|
|
in the footer of every page. |
|
Revision Service |
The possession of this manual does not automatically mean inclu- |
|
sion in the revision service. You will be included in the revision |
|
|
service after: |
|
|
— technical training by B. Braun Melsungen or |
|
|
— a written order placed with the sales department of B. Braun |
|
|
(fee required). |
|
Perfusor® compact S, 2.1 gb |
0 — 5 |
|
0 |
Important Preliminary Remarks |
Responsibility of the Manufacturer |
The manufacturer, person who assembles, installs or imports the |
|
device can only be held responsible for safety, reliability and per- |
|
|
formance if |
|
|
— mounting, enhancements, new settings, changes or repairs |
|
|
are carried out by duly authorized persons, |
|
|
— the electrical installation in the corresponding room meets |
|
|
the requirements of the VDE 0107, VDE 0100 part 710 or |
|
|
IEC 60364-7-710 and the national standards, |
|
|
— the device is used in accordance with the instructions for use |
|
|
and the Service Manual, |
|
|
— the Technical Safety Checks are performed at regular inter- |
|
|
vals, |
|
|
— a current manual which corresponds to the revision state is |
|
|
used when carrying out maintenance, repair and service, |
|
|
— the service technician takes part in the revision service, |
|
|
— the technician has participated in a technical training course |
|
|
for the specific B. Braun unit. |
|
Quality Management |
B. Braun is certified in accordance with DIN EN ISO 9001 and |
|
ISO 13485. This certification also includes maintenance and serv- |
|
|
ice. |
|
|
The unit has the CE label. The CE label confirms that the device |
|
|
corresponds to the “Directive of the Council for Medical Products |
|
|
93/42/EC” of June 14, 1993. |
|
Checks and Repair |
Training may only be performed by B. Braun. The possession of the |
|
manual does not authorize the performance of repairs. The in- |
|
|
structions on electrostatic sensitive components (ESD standards) |
|
|
must be observed. |
|
|
After repair a device check or diagnosis is to be carried out. |
|
Notes on ESD |
Semiconductors can be destroyed by electrostatic discharge. Es- |
|
pecially MOS components can be damaged by interference from |
|
|
electrostatic fields, even without discharge via contact. This type |
|
|
of damage is not immediately recognizable. Unit malfunctions |
|
|
can even occur after a longer period of operation. |
|
0 — 6 |
Perfusor® compact S, 2.1 gb |
|
Important Preliminary Remarks |
0 |
Fig.: 0 — 1
Spare Parts and Test Equipment
Setting Off
Each workstation must be equipped according to the recommendations with the necessary static protective measures, if ESD components or boards are handled.
Each workstation must be equipped with a conductive table surface. The conductive surface, the soldering iron or the soldering stations must be grounded via protective resistors.
Chairs must be of antistatic design. The floor or floor mats should be of electrically conductive material.
Personnel must wear conductive wristbands which are connected to a central ground potential via protective resistors, e.g. the ground contact of a wall outlet. Furthermore it is recommended that personnel wear cotton clothing and electrically conductive shoes to prevent electrostatic charge.
Only use original spare parts from the manufacturer. Do not tamper with assembly groups which can only be exchanged completely. The spare parts required are listed in Section 9.
Service personnel are responsible for the calibration of their test equipment. Original test equipment can be calibrated at the works of B. Braun. Further information is available upon request.
Additional notes and warnings are set off as follows:
Note
Is used for additional or special notes concerning information and working steps.
CAUTION
Is used for working steps which may result in damage to the unit, system or to a connected device.
WARNING
IS USED FOR WORKING STEPS WHICH MAY RESULT IN PERSONAL INJURY.
References to chapters are shown as follows (see “Setting Off“ pg. 0 — 8)
References to figures and tables are shown as follows Fig.: 2 — 3 or Table 2 — 1
|
Perfusor® compact S, 2.1 gb |
0 — 7 |
|
0 |
Important Preliminary Remarks |
|
References to item numbers in figures are shown as follows |
||
|
(Fig.: 1 — 1 / Item 1) |
||
|
In this case “Fig.: 1 – 1“ is the figure number and “Item 1“ the item |
||
|
number within the figure. |
||
|
When the Service Manual is stored as pdf-file, these references |
||
|
are displayed green. Click with the mouse button on a reference |
||
|
to jump to the corresponding source. |
||
|
Menu commands are described as: |
||
|
Menu File. |
||
List of Abbreviations |
Abbreviations which are not generally known, but are used in this |
|
|
manual, are listed below. |
||
|
A-Module |
Analog Module |
|
|
DMS |
Strain gauge |
|
|
E-Module |
Electronic Module |
|
|
ESD |
Electrostatic Discharge |
|
|
IfU |
Instructions for Use |
|
|
LCD |
Liquid Crystal Display |
|
|
MFC |
Multi-Function Connector |
|
|
PS-Module |
Power Supply Module |
|
|
TSC |
Technical Safety |
|
|
Checks |
||
|
TEMP |
Temperature |
|
0 — 8 |
Perfusor® compact S, 2.1 gb |
Contact Persons 0
Technical Training |
Via local representative. |
|
Entry for Technical Training |
Application for a technical training course must be made via the |
|
|
responsible representative. |
||
Ordering of Spare Parts and Test Equipment |
Please contact your local B. Braun subsidary. |
|
|
International Technicians (Intercompany) |
||
|
Nadja Machal |
||
|
Fax: |
+49 5661 / 75 -47 89 |
|
|
e-mail: |
nadja.machal@bbraun.com |
|
Service Hotline |
Karl Tippel, Tanja Kördel |
|
|
Phone: |
+49 5661 / 71 — 35 25 |
|
|
Fax: |
+49 5661 / 71 — 35 26 |
|
|
e-mail: |
karl.tippel@bbraun.com |
|
|
e-mail: |
tanja.koerdel@bbraun.com |
|
Return of Spare Parts and Test Equipment |
B. Braun Melsungen AG |
|
|
Schwarzenberger Weg 73-79 |
||
|
Wareneingang Werk C |
||
|
34 212 Melsungen |
||
|
Germany |
||
|
Safety Officer |
Dr. Dirk Woitaschek |
|
|
(§ 30 MPG) |
e-mail: dirk.woitaschek@bbraun.com |
|
Translation |
PAS GmbH, Brückner GmbH, Germany |
|
Perfusor® compact S, 2.1 gb |
0 — 9 |
|
0 — 10 |
Perfusor® compact S, 2.1 gb |
System Overview 1
Physical Construction
The Perfusor® compact S is a compact, stacking, portable and light-weight syringe pump which is used for precise dosing of small to high volumes of fluids in infusion and alimentary therapies.
The standard delivery rate range is 0.1 to 200 ml/h (in increments of 0.01 ml/h).
All important information is displayed on an LCD-display. The Perfusor® compact S features: simple operation via a membrane keyboard and a microprocessor-controlled function process and monitoring. The Perfusor® compact S has a long service life and is easy-to-service due to its modular design. Individual modules can be replaced easily and quickly, and the Service Program runs on a PC.
.
|
Carrying handle |
Membrane keyboard |
Battery compartment |
MFC-socket |
|||||||||||||||||||
|
LCD-display |
Axial positioner Drive head with lock |
Mains connection |
||
|
Syringe holder |
Snap-in clip |
|||
|
and push-button sensor |
||||
|
(on both sides) |
||||
|
Axial positioner |
||||
|
Syringe table |
Type plate |
Clamp |
||
and quick reference guide
Unit feet
View from below
Fig.: 1 — 1
|
Perfusor® compact S, 2.1 gb |
1 — 1 |
Function |
The electronics of the Perfusor® compact S consists of the follow- |
|
|
ing components: |
||
|
1. |
A-Module with MFC-board as the central power supply and |
|
|
interface |
||
|
2. |
E-Module as operating and control unit |
|
|
3. |
Drive unit, consisting of |
|
|
— drive board with the complete sensor technology, light |
barriers for syringe preand end-alarm, syringe size recognition and motor operation control
— pressure sensor board with sensor for an inserted syringe and force sensor amplifier
— positive locking sensor board with sensor for the frictional connection between nut and spindle of the drive
— pressure sensor (pressure).
|
Fig.: 1 — 2 |
Block diagram |
|||||||||||||||||||||||||||||||||
|
1 — 2 |
Perfusor® compact S, 2.1 gb |
Accessories |
Designation |
Ord. No. |
|
Unit connecting lead 220-240 V . . . . . . . . . . . . . . . . . |
3450 2718 |
|
|
Pole clamp (universal clamp, rotating) . . . . . . . . . . . . |
3450 9054 |
|
|
Battery pack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . |
3450 1690 |
|
Perfusor® compact S, 2.1 gb |
1 — 3 |
|
1 — 4 |
Perfusor® compact S, 2.1 gb |
Software 2
Approved Software Versions
|
Position |
1 |
2 |
3 |
4 |
5 |
6 |
7 |
8 |
9 |
|||||
|
Digit |
P |
L |
B |
E |
0 |
0 |
0 |
1 |
4 |
|||||
|
Revision level |
||||||||||||||
|
Hardware identification |
||||||||||||||
|
Software group |
||||||||||||||
|
Hardware group |
||||||||||||||
|
Perfusor® compact S |
||||||||||||||
|
Fig.: 2 — 1 |
||||||||||||||
The software and hardware revision level is displayed on the LCDdisplay when the unit is switched on. The characters on the display must correspond with the indication on the instructions for use.
|
Version PLBD00010 |
first approved software version |
|
Version PLBE00010 |
with Dianet Star |
|
Version PLBE00011 |
with Dianet Star and modified |
|
signalling in case of a missing |
|
|
battery |
|
|
Version PLBE00013 |
Dianet Star, enhanced |
|
Version PLBE00014 |
with Dianet Star and modified |
|
syringe size recognition |
Version Display during Switch-On Test
1.Switch on unit.
2.The following information is displayed one after the other on screen:
88:8.8
11:1.1
22:2.2
|
55:5.5 |
|
|
b:E. |
Reference to the instructions |
|
for use (hardand soft- |
|
|
ware group) |
3.The Perfusor® compact S switches over to normal operation.
|
Perfusor® compact S, 2.1 gb |
2 — 1 |
2 Software
Extended Version Display during Switch-On Test
1.Switch on unit.
2.Press the F button and keep the button pressed during normal switch-on test. The following information (examples) appears on screen after the information displayed during normal switch-on test:
|
00 |
Hardware identification |
|
(no importance for the |
|
|
Perfusor® compact S) |
|
|
0101 |
Software version |
|
0063 |
0063 operating hours |
|
0004 |
Maintenance interval timer |
3.Release the F button to exit. The Perfusor® compact S switches over to normal operation.
|
2 — 2 |
Perfusor® compact S, 2.1 gb |
Software 2
Error Messages and Alarms |
In case of a unit malfunction a continuous signal is activated, and |
|
|
the function processor displays an alarm and an error code. The |
||
|
error code of the control microprocessor can be queried with the |
||
|
F button. Please state both error codes if you have any questions. |
||
|
Acknowledge alarm and switch device off. |
||
|
Device Alarms of the Function Processor |
||
|
LCD-Display |
Description |
|
|
1 |
Different syringe recognition |
|
|
2 |
Different FPand CMP condition |
|
|
3 |
Rate of FPand CMP different |
|
|
4 |
Different function mode |
|
|
5 |
Different rate of delivery |
|
|
6 |
Different target volume |
|
|
7 |
Different step volume (low) |
|
|
8 |
Different motor steps |
|
|
12 |
Different state/motor state |
|
|
20 |
Invalid normal state |
|
|
21 |
return from PlcMain |
|
|
22 |
Unexpected reset |
|
|
28 |
No sync at Plc_Down |
|
|
29 |
No sync at Plc_On |
|
|
30 |
Different CMP/FP mode ports |
|
|
31 |
Invalid mode ports |
|
|
32 |
Invalid variable values |
|
|
33 |
Error in ROM test |
|
|
34 |
Different software version |
|
|
40 |
Unexpected interrupt |
|
|
45 |
Potentiometer faulty |
|
|
46 |
Verst.umsch. / DAC faulty |
|
|
47 |
Pressure too low |
|
|
48 |
Buffer filling too high |
|
|
49 |
Faulty sensor sync |
|
|
51 |
Motor on during reverse run |
|
|
52 |
Step cumulation > 10 steps |
|
|
Table 2 — 1 |
(Part 1 of 3) |
|
Perfusor® compact S, 2.1 gb |
2 — 3 |
2 Software
|
LCD-Display |
Description |
|
53 |
Illegal setting of Mot_Ok |
|
54 |
Diff. result of direction of rotation recognition |
|
55 |
Reverse polarity of motor |
|
56 |
Invalid syringe |
|
57 |
Overflow of motor step counter |
|
59 |
No sync at Mot_Test |
|
61 |
Different SW button NEC<>H8 |
|
62 |
Timeout KBD watchdog |
|
63 |
Error in switch-on test |
|
70 |
Control timer overflow (int) |
|
71 |
Control timer underflow |
|
72 |
Control timer overflow |
|
73 |
100 ms cycle overflow |
|
75 |
Tim_WaitUntil overflow |
|
81 |
Error upon reading of EEPROM |
|
82 |
Error of syringe data record |
|
83 |
Error of EEP data consistency |
|
84 |
Ad difference between NEC/H8 |
|
85 |
Bw difference between NEC/H8 |
|
86 |
Md difference between NEC/H8 |
|
90 |
Syringe state in Oper_Syr |
|
91 |
Set syringe type |
|
92 |
Consistency error |
|
93 |
Difference between setting and display |
|
94 |
Timer synchronization |
|
95 |
Syringe type entered |
|
99 |
Volume/step too large |
|
100 |
Division by zero |
|
101 |
Illegal zero pointer |
|
102 |
Illegal switch to default |
|
103 |
Too many sync data |
|
104 |
Odd number of sync data |
|
105 |
No contact to NEC in OFF |
|
109 |
Faulty synchronization |
|
Table 2 — 1 |
(Part 2 of 3) |
|
2 — 4 |
Perfusor® compact S, 2.1 gb |
Software 2
|
LCD-Display |
Description |
|
110 |
Alarm on CMP side |
|
111… 119 |
Motor test 1 … 9 |
|
120 |
Motor current flow in OFF |
|
121 |
Battery discharged during test |
|
126 |
Alarm synchron. (coming) |
|
127 |
Alarm synchron. (going) |
|
Table 2 — 1 |
(Part 3 of 3) |
|
Perfusor® compact S, 2.1 gb |
2 — 5 |
2 Software
Device Alarms of the Control Microprocessor
|
LCD-Display |
Description |
|
128 |
Unexpected reset |
|
129 |
Unexpected hardware interrupt |
|
130 |
Access of zero pointer |
|
131 |
Attempted division by zero |
|
132 |
Internal software error |
|
133 |
Area fault |
|
134 |
State/motor state |
|
135 |
Invalid variable values |
|
136 |
Invalid operating condition |
|
137 |
Illegal mode – port value |
|
138 |
H8 indicates GA F14_H8GA_K16 |
|
150 |
Different software versions |
|
151 |
Double CRC error |
|
152 |
Synchronization fault |
|
153 |
Different states |
|
154 |
Different rates |
|
155 |
Different F-mode |
|
156 |
Different mode values |
|
157 |
Different alarm recognition |
|
158 |
Different alarm clearance |
|
159 |
Err. current volume |
|
160 |
Err. volume preselection |
|
161 |
Err. volume per step |
|
170 |
Sensor sync. failed |
|
171… 174 |
Sensor — dark test error |
|
175 |
Potentiometer holder defective |
|
176 |
Invalid strain gauge signal |
|
180 |
ROM test error |
|
181 |
RAM test error |
|
182 |
Keyboard test error column |
|
183 |
Dynamic memory test |
|
184 |
Motor test no sync |
|
185 |
Keyboard test error |
|
Table 2 — 2 |
(Part 1 of 2) |
|
2 — 6 |
Perfusor® compact S, 2.1 gb |
Software 2
|
LCD-Display |
Description |
|
186 |
Timer test error |
|
187 |
CPU test error |
|
191 |
Different software buttons |
|
192 |
Keyboard timeout error |
|
193 |
Keyboard drive error |
|
200 |
Cycle > 100 ms |
|
202 |
Time > Until |
|
203 |
Watchdog interrupt |
|
205 |
Time-out when switching H8 on |
|
206 |
Time-out when switching H8 off |
|
207 |
No sync at Plc_Down |
|
208 |
No sync at Plc_On |
|
209 |
CMP/FP timer – end sync error |
|
220 |
Different phases (busy) |
|
221 |
Different phases (idle) |
|
222 |
Motor on at reverse steps |
|
223 |
Too many pending steps |
|
224 |
Motor current error |
|
225 |
Error of motor step number |
|
226 |
Reverse polarity of motor |
|
227 |
Motor steps overflow |
|
230 |
Different syringe recognition |
|
231 |
CMP/FP syringe state |
|
232 |
CMP/FP syringe type set |
|
233 |
CMP/FP syringe type set |
|
234 |
CRC error in syringe data record |
|
241… 249 |
Motor test 1 … 9 errors |
|
250 |
Motor ON recognized in OFF-mode |
|
251 |
Battery voltage low |
|
Table 2 — 2 |
(Part 2 of 2) |
Note
Operating alarms are specified in the instructions for use.
|
Perfusor® compact S, 2.1 gb |
2 — 7 |
2 Software
For your notes:
|
2 — 8 |
Perfusor® compact S, 2.1 gb |
Service Program 3
Current Service Program
3.5» floppy disk . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3450 6330
Interface cable . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 0871 1661
Introduction |
The Service Program runs on a PC. All functions are easy to oper- |
|
|
ate in the pulldown-menus as in Windows. |
||
|
WARNING |
||
Selection menu
|
Length calibration |
||
|
Syringe calibration |
Control microprocessor |
|
|
Pressure calibration |
Function processor |
Serial number
Fig.: 3 — 1
NEVER RUN SERVICE MODE WHEN A PATIENT IS CONNECTED! DO NOT CONNECT THE SERVICE CONNECTOR OR THE SERVICE CABLE WHEN A PATIENT IS CONNECTED TO THE UNIT! FIRST SWITCH THE UNIT OFF BEFORE ANY FURTHER USE AFTER WORKING WITH THE SERVICE CONNECTOR.
CHECK UNIT ACCORDING TO THE PROCEDURAL INSTRUCTIONS FOR INSPECTION (see „Procedural Instructions for Inspection after Operation of the Service Program“ pg. 3 — 11).
When the Service Program is installed and the PC is connected to the Perfusor® compact S, the following functions can be executed:
—Drive calibration
—Reading / loading pump data
—Displaying operation values
—Displaying and changing parameters
—Saving all data to a floppy disk, hard disk or similar
System Requirements
—PC with WIN 95, 98, 2000 or NT
—Free serial port COM 1 or COM 2
—Disk drive
—Mouse
|
Perfusor® compact S, 2.1 gb |
3 — 1 |
|
Installation |
|||||
|
1. |
Insert disk. |
||||
|
2. |
Start the File Manager or Windows Explorer. |
||||
|
3. |
Select disk drive. |
||||
|
4. |
Start Setup.exe file with a double click and follow the in- |
||||
|
structions. Latest information on the Service Program is doc- |
|||||
|
umented in the Readme.txt file on the floppy disk. |
|||||
|
Uninstall |
|||||
|
1. |
Menu bar of the PC: Start Programs B Braun PCS |
||||
|
Unwise.exe. The Service Program is deleted. |
|||||
Working with the Service Program |
Preparation |
||||
|
1. |
Connect service cable (Fig.: 3 — 2 / Item 2) to MFC connector |
||||
|
(Fig.: 3 — 2 / Item 1) of the unit and the PC serial port (COM |
|||||
|
1 |
1 or COM 2). |
||||
|
2. |
Connect mains cable to the unit. |
||||
|
Start Program |
|||||
|
2 |
1. |
Menu bar of the PC: Start Programs B Braun PCS |
|||
|
PCS.exe. The Service Program is started. |
|||||
|
Configuration |
|||||
|
Fig.: 3 — 2 |
1. |
Select menu File Configuration. |
|||
|
2. |
Select language and port. |
||||
|
Legend of fig. 3 — 2: |
|||||
|
3. |
Acknowledge with OK. |
||||
|
ItemDesignation |
|||||
|
1 MFC connector on the unit |
Connect |
||||
|
2 MFC service cable |
1. |
Select menu File Connect and press F1 button and ON-key |
|||
|
on the Perfusor® compact S. If the unit is connected when be- |
|||||
|
ing switched off (calibration) |
and |
are displayed. If |
|||
|
the unit is switched on (test syringe size recognition) |
|||||
|
is additionally displayed. |
|
3 — 2 |
Perfusor® compact S, 2.1 gb |