Кратко перечислю и опишу некоторые коды:
00
(Необходимо проверить правильно ли установлен процессор и сбросить CMOS)
0d
(Проблема связана с памятью, видеокартой или другими устройствами. Необходимо сбросить CMOS, вытащить, вставить оперативную память и видеокарту, а также извлечь другие USB и PCI устройства)
01 – 54 (кроме 0d), 5A — 60
(Проблема связана с памятью. Необходимо переустановить процессор и оперативную память, потом сбросить CMOS. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
55
(Оперативная память не обнаружена. Необходимо переустановить процессор и оперативную память. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
61 — 91
(Ошибка инициализации чипсета. Необходимо сбросить или очистить CMOS)
92 — 99
(Проблема относится к PCI-E устройствам. Необходимо заново установить PCI-E устройство или установить в другой слот. Если проблема не исчезнет, то необходимо извлечь все PCI-E устройства или использовать другой видеоадаптер)
A0 — A7
(Проблема связана с IDE или SATA устройствами. Необходимо переподключить IDE и SATA устройства. Если проблема останется, необходимо очистить CMOS и попробовать отключить все SATA устройства)
b0
(Проблема связана с оперативной памятью. Необходимо переустановить процессор и оперативную память. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти. * Для моделей X79, необходимо установить память в слоты DDR3 A1, B1, C1 и D1)
b4
(Проблема связана с USB устройствами. Необходимо отключить все USB устройства)
b7
(Проблема связана с памятью. Необходимо переустановить процессор и оперативную память, потом сбросить CMOS. Если проблема останется, необходимо установить только один модуль памяти или использовать другой модуль памяти)
d6
(Видеокарта не принята. Необходимо очистить CMOS и наново установить видеокарту. Если проблема останется, необходимо установить видеокарту в другой слот или использовать другую видеокарту)
d7
(Клавиатура и мышь не обнаружена. Необходимо переподключить клавиатуру и мышь)
d8
(Неверный пароль)
FF
(Необходимо проверить правильно ли установлен процессор и сбросить CMOS)
Смотрите также мою статью:
Описание звуковых сигналов BIOS
-
- Aug 25, 2014
-
- 44
-
- 0
-
- 18,530
- 0
-
#1
PC specs:
- Intel i5-4690K
- ASRock Z97 EXTREME4 ATX LGA1150 Mobo
- MSI GeForce GTX 970 4GB
- G.skills X Series 8GB RAM (2 x 4GB) DDR3-1866
- Samsung 840 EVO SSD
- Seagate Barracuda HDD
After transporting and doing maintenance on my rig it seems to be throwing an A2 error. All I did was clean the insides of dust, added a OCZ Z-Drive R4 SSD and changed the CMOS battery (cleared CMOS) after experiencing date and time loss if PC unplugged.
Actions I have taken:
- Made sure all connectors inside the case were firmly seated (especially the PSU plugs. To make sure I didn’t knocked anything lose while cleaning).
- Removed Z-Drive SSD.
- Removed all storage devices but boot device.
- Removed GPU.
- Removed 3 of 4 sticks of RAM.
- Unplugged all peripheral devices.
Error codes I have seen: A2/D7 /64. After seeing an A2 error code. I proceeded to unplug the mouse and keyboard and restarted the PC. I saw a D7 code so plugged in the keyboard. After doing so, the 64 code appeared.
Please could someone help me out because I have exhausted my knowledge on this one.
Cheers
-
- Nov 6, 2019
-
- 5,773
-
- 1,238
-
- 23,390
- 1,006
-
#2
You transported your system. That code is a motherboard code for the CPU.
If I were you I would unplug everything. Even the boot drive. Leave 1 stick of RAM and plug your monitor on your motherboard graphics port and remove the GPU. Leave your system barebone with only the stuff you need plugged in.
If that doesn’t work I would check the CPU for bent pins. Transporting a PC can be hard on the CPU heatsink and you never know. Could bend pin.
-
- Nov 6, 2019
-
- 5,773
-
- 1,238
-
- 23,390
- 1,006
-
#2
You transported your system. That code is a motherboard code for the CPU.
If I were you I would unplug everything. Even the boot drive. Leave 1 stick of RAM and plug your monitor on your motherboard graphics port and remove the GPU. Leave your system barebone with only the stuff you need plugged in.
If that doesn’t work I would check the CPU for bent pins. Transporting a PC can be hard on the CPU heatsink and you never know. Could bend pin.
-
- Aug 25, 2014
-
- 44
-
- 0
-
- 18,530
- 0
-
#3
I have a feeling that the issue was with replacing the CMOS battery. Leaving the PC overnight unplugged must’ve let the system fully reset.
Thanks buddy
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
M
|
Question Which one of these 4 MoBos are better for my specific demands? | Motherboards | 4 | Tuesday at 9:02 AM |
|
|
Question (solved) | Motherboards | 0 | Sunday at 11:20 AM |
|
K
|
Question AsRock B450M pro4 M.2 support | Motherboards | 2 | Jan 21, 2023 |
|
P
|
Question ASRock mobo stopped working | Motherboards | 2 | Jan 19, 2023 |
|
J
|
Question Asrock b450m Pro4 issue | Motherboards | 3 | Jan 17, 2023 |
|
N
|
Question AsRock Taichi X99 Powered On While Plugging in PCI-X Card | Motherboards | 7 | Jan 15, 2023 |
|
B
|
Question ASRock B450m Pro4 won’t work with USB Docking Stations | Motherboards | 0 | Jan 12, 2023 |
|
|
Question ASRock Z97 Extreme4 M.2 NVMe SSD Detection | Motherboards | 2 | Jan 12, 2023 |
|
F
|
Question ASRock z390 extreme4 no longer sees m.2 drive | Motherboards | 1 | Sep 6, 2022 |
|
|
Question ASRock Z77 Extreme4 Motherboard shows zero signs of life — no power, no fans, no lights, not posting | Motherboards | 6 | Jul 15, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
-
- Aug 25, 2014
-
- 44
-
- 0
-
- 18,530
- 0
-
#1
PC specs:
- Intel i5-4690K
- ASRock Z97 EXTREME4 ATX LGA1150 Mobo
- MSI GeForce GTX 970 4GB
- G.skills X Series 8GB RAM (2 x 4GB) DDR3-1866
- Samsung 840 EVO SSD
- Seagate Barracuda HDD
After transporting and doing maintenance on my rig it seems to be throwing an A2 error. All I did was clean the insides of dust, added a OCZ Z-Drive R4 SSD and changed the CMOS battery (cleared CMOS) after experiencing date and time loss if PC unplugged.
Actions I have taken:
- Made sure all connectors inside the case were firmly seated (especially the PSU plugs. To make sure I didn’t knocked anything lose while cleaning).
- Removed Z-Drive SSD.
- Removed all storage devices but boot device.
- Removed GPU.
- Removed 3 of 4 sticks of RAM.
- Unplugged all peripheral devices.
Error codes I have seen: A2/D7 /64. After seeing an A2 error code. I proceeded to unplug the mouse and keyboard and restarted the PC. I saw a D7 code so plugged in the keyboard. After doing so, the 64 code appeared.
Please could someone help me out because I have exhausted my knowledge on this one.
Cheers
-
- Nov 6, 2019
-
- 5,773
-
- 1,238
-
- 23,390
- 1,006
-
#2
You transported your system. That code is a motherboard code for the CPU.
If I were you I would unplug everything. Even the boot drive. Leave 1 stick of RAM and plug your monitor on your motherboard graphics port and remove the GPU. Leave your system barebone with only the stuff you need plugged in.
If that doesn’t work I would check the CPU for bent pins. Transporting a PC can be hard on the CPU heatsink and you never know. Could bend pin.
-
- Nov 6, 2019
-
- 5,773
-
- 1,238
-
- 23,390
-
- 1,006
-
#2
You transported your system. That code is a motherboard code for the CPU.
If I were you I would unplug everything. Even the boot drive. Leave 1 stick of RAM and plug your monitor on your motherboard graphics port and remove the GPU. Leave your system barebone with only the stuff you need plugged in.
If that doesn’t work I would check the CPU for bent pins. Transporting a PC can be hard on the CPU heatsink and you never know. Could bend pin.
-
- Aug 25, 2014
-
- 44
-
- 0
-
- 18,530
- 0
-
#3
I have a feeling that the issue was with replacing the CMOS battery. Leaving the PC overnight unplugged must’ve let the system fully reset.
Thanks buddy
| Thread starter | Similar threads | Forum | Replies | Date |
|---|---|---|---|---|
|
M
|
Question Which one of these 4 MoBos are better for my specific demands? | Motherboards | 4 | Tuesday at 9:02 AM |
|
|
Question (solved) | Motherboards | 0 | Sunday at 11:20 AM |
|
K
|
Question AsRock B450M pro4 M.2 support | Motherboards | 2 | Jan 21, 2023 |
|
P
|
Question ASRock mobo stopped working | Motherboards | 2 | Jan 19, 2023 |
|
J
|
Question Asrock b450m Pro4 issue | Motherboards | 3 | Jan 17, 2023 |
|
N
|
Question AsRock Taichi X99 Powered On While Plugging in PCI-X Card | Motherboards | 7 | Jan 15, 2023 |
|
B
|
Question ASRock B450m Pro4 won’t work with USB Docking Stations | Motherboards | 0 | Jan 12, 2023 |
|
|
Question ASRock Z97 Extreme4 M.2 NVMe SSD Detection | Motherboards | 2 | Jan 12, 2023 |
|
F
|
Question ASRock z390 extreme4 no longer sees m.2 drive | Motherboards | 1 | Sep 6, 2022 |
|
|
Question ASRock Z77 Extreme4 Motherboard shows zero signs of life — no power, no fans, no lights, not posting | Motherboards | 6 | Jul 15, 2022 |
- Advertising
- Cookies Policies
- Privacy
- Term & Conditions
- Topics
2.11 Режим отладки
На материнской плате расположен светодиод для отладки. Он покажет
коды ошибки, если во время загрузки системы произойдет сбой. Светодиод
облегчает поиск неполадок. Расшифровку кодов ошибок можно найти на
страницах 35, 36, 37 и 38.
2.12 Указания по установке драйверов
Чтобы установить драйверы на систему, необходимо прежде всего вставить
компакт-диск поддержки в оптический дисковод. После этого будут
автоматически определены драйверы, совместимые с вашей системой, и их
список появится на странице установки драйверов компакт-диска поддержки.
Вам следует установить эти необходимые драйверы в указанном порядке,
сверху вниз. Тем самым будет обеспечена правильная работа установленных
драйверов.
2.13 Установка Windows
64-bit / XP / XP 64-bit на систему с функциями RAID
Подробную информацию об установке ОС Windows
TM
Vista
64-bit / XP / XP 64-bit на жестких дисках SATA3 с функциями RAID см.
в документе по приведенному ниже пути на компакт-диске с информацией о
поддержке: .. RAID Installation Guide
2.14 Установка Windows
64-bit / XP / XP 64-bit на систему с функциями RAID
Если вы хотите установить операционную систему Windows
TM
/ Vista
64-bit / XP / XP 64-bit на компьютер с функциями RAID, выполните
следующие действия.
2.14.1 Установка Windows
функциями RAID
Если вы хотите установить операционную систему Windows
компьютер с функциями RAID, выполните следующие действия.
Использование жестких дисков SATA3 без функций NCQ и горячего
подключения
164
®
7 / 7 64-bit / Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit на систему с
ASRock 970 Extreme4 Motherboard
TM
TM
/ Vista
®
TM
7 / 7 64-bit / Vista
/
TM
TM
/ Vista
®
7 / 7 64-bit / Vista
®
XP / XP 64-bit на
TM
36
ASRock 970 Extreme4 Motherboard
0x37
Post-Memory North Bridge initialization is started
0x38
Post-Memory North Bridge initialization (North Bridge module specifi c)
0x39
Post-Memory North Bridge initialization (North Bridge module specifi c)
0x3A
Post-Memory North Bridge initialization (North Bridge module specifi c)
0x3B
Post-Memory South Bridge initialization is started
0x3C
Post-Memory South Bridge initialization (South Bridge module specifi c)
0x3D
Post-Memory South Bridge initialization (South Bridge module specifi c)
0x3E
Post-Memory South Bridge initialization (South Bridge module specifi c)
0x3F-0x4E
OEM post memory initialization codes
0x4F
DXE IPL is started
0x50
Memory initialization error. Invalid memory type or incompatible memory
speed
0x51
Memory initialization error. SPD reading has failed
0x52
Memory initialization error. Invalid memory size or memory modules do not
match
0x53
Memory initialization error. No usable memory detected
0x54
Unspecifi ed memory initialization error
0x55
Memory not installed
0x56
Invalid CPU type or Speed
0x57
CPU mismatch
0x58
CPU self test failed or possible CPU cache error
0x59
CPU micro-code is not found or micro-code update is failed
0x5A
Internal CPU error
0x5B
reset PPI is not available
0x5C-0x5F
Reserved for future AMI error codes
0xE0
S3 Resume is stared (S3 Resume PPI is called by the DXE IPL)
0xE1
S3 Boot Script execution
0xE2
Video repost
0xE3
OS S3 wake vector call
0xE4-0xE7
Reserved for future AMI progress codes
0xE8
S3 Resume Failed
0xE9
S3 Resume PPI not Found
0xEA
S3 Resume Boot Script Error
0xEB
S3 OS Wake Error
0xEC-0xEF
Reserved for future AMI error codes
0xF0
Recovery condition triggered by fi rmware (Auto recovery)
0xF1
Recovery condition triggered by user (Forced recovery)
0xF2
Recovery process started
0xF3
Recovery fi rmware image is found
0xF4
Recovery fi rmware image is loaded
0xF5-0xF7
Reserved for future AMI progress codes
0xF8
Recovery PPI is not available
0xF9
Recovery capsule is not found
0xFA
Invalid recovery capsule
0xFB – 0xFF
Reserved for future AMI error codes
0x60
DXE Core is started
0x61
NVRAM initialization
English