Цифровая
печатная
машина
Xerox 700 —
Руководство
пользователя
Дополнительное
оборудование
10-17
Коды
неисправностей
Код
неиспра
Вероятная
причина
Рекомендуемое
решение
048 100
048 102
048 103
048 900
048 901
048 903
Застряла
бумага
Застревание
в
тракте
•
подачи
На
пользовательском
•
интерфейсе
отображается
уведомление
о
застревании
Откройте
переднюю
дверцу
.
•
Аккуратно
вытащите
все
листы
и
обрывки
•
бумаги
из
зон
застревания
.
Закройте
переднюю
дверцу
.
•
Убедитесь
,
что
используемая
бумага
•
соответствует
предусмотренным
требованиям
.
048 300
Открыта
передняя
дверца
.
Закройте
переднюю
дверцу
.
048 310
048 311
048 312
048 313
048 314
048 315
048 316
Сбой
датчика
и
ремня
устройства
разглаживания
Выключите
и
снова
включите
питание
.
048 318
048 319
Сбой
вентилятора
охлаждения
Выключите
и
снова
включите
питание
.
048 320
048 321
048 322
Сбой
связи
или
неисправность
подключения
Проверьте
соединение
между
•
интерфейсным
модулем
и
устройством
послепечатной
обработки
.
Выключите
и
снова
включите
питание
.
•
048 323
Сбой
интерфейсного
модуля
Выключите
и
снова
включите
питание
.
Thanks: 0
Likes: 0
Dislikes: 0
-
04-04-2017
#1
Senior Tech
100+ Posts
- Rep Power
- 0
xerox 700 error code 077-311
i have a xerox 700 with a code 077-311 that is really challenging me .It talks of the inverter system of which we have changed from a working machine.
when you test the inverter nip motter in diagnostic it makes a vibrating noise and the motor does not turn .I have also changed the iot driver no result.
what can i do.
-
04-04-2017
#2
Re: xerox 700 error code 077-311
There is error in edoc. Nip sensor is in
PL 10.6 item 14.
Rezistence of the nip motor = 1.3 ohm
-
04-05-2017
#3
Senior Tech
100+ Posts
- Rep Power
- 0
Re: xerox 700 error code 077-311
Originally Posted by adriansto
There is error in edoc. Nip sensor is in
PL 10.6 item 14.
Rezistence of the nip motor = 1.3 ohmHi My friend,
thanks for the tips .
I have gone ahead and replaced the exit inverter assembly and IOT driver Pwb from a working machine but the fault didn’t clear,
the inverter motor still make vibrating noise while warming up with fault code 077-311.Muks
Bookmarks
Bookmarks
Posting Permissions
- You may not post new threads
- You may not post replies
- You may not post attachments
- You may not edit your posts
- BB code is On
- Smilies are On
- [IMG] code is On
- [VIDEO] code is On
- HTML code is Off
Forum Rules
22 Problem Solving
Error Code
072-210
[Cause]
[Remedy] Confirm the paper loading condition for Tray 2, and then switch off the machine power,
072-212
[Cause]
[Remedy] Contact our Customer Support Center. You can use a tray other than Tray 2.
073-210
[Cause]
[Remedy] Confirm the paper loading condition for the tray, and then switch off the machine
073-212
[Cause]
[Remedy] Contact our Customer Support Center. You can use a tray other than Tray 3.
075-210
[Cause]
075-211
[Remedy] Confirm the paper loading condition for the tray, and then switch off the machine
077-311
[Cause]
077-312
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
077-320
22
077-325
[Cause]
077-326
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
077-332
077-333
077-344
[Cause]
077-345
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
077-348
077-349
077-350
077-351
078-215
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
078-219
[Cause]
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
078-222
[Cause]
078-223
[Remedy] Switch off the machine power, make sure that the touch screen is blank, and then switch
836
Cause and Remedy
Tray 2 malfunction
make sure that the touch screen is blank, and then switch on the machine power. If the
error still is not resolved, contact our Customer Support Center. You can use a tray other
than Tray 2.
Tray 2 malfunctioned
Tray 3 malfunction
power, make sure that the touch screen is blank, and then switch on the machine power.
If the error still is not resolved, contact our Customer Support Center. You can use a tray
other than Tray 3.
Tray 3 malfunction
Tray 5 malfunction
power, make sure that the touch screen is blank, and then switch on the machine power.
If the error still is not resolved, contact our Customer Support Center.
An error occurred.
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
An error occurred in the machine.
on the machine power. If the same message is displayed again, contact our Customer
Support Center.
An error occurred in the machine.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
An error occurred in Tray 6.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
An error occurred in Tray 6.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.
An error occurred in HCF.
on the machine power. If the error still is not resolved, contact our Customer Support
Center.